ANSI B16.5 Titanium Flanges Weight, Dimensions Chart in mm, kg, PDF online

Titanium flanges are small components that control or guide the flow of liquids and gases through a piping system. They work by completely or partially closing and blocking the openings in the pathway of the pipeline thus controlling the flow of oils, liquids, and gases. Open flanges cause the flow of liquids and gases from higher pressure to lower pressure. Flanges are a variety of fitting made out of titanium. They inherit all the physical and chemical properties exhibited by titanium. They are corrosive-proof and have a long service life. Titanium Flanges weight dimensions are in kg.

A flange casting is typically a cast ring designed to connect the parts of a pipe or other machinery which requires a connecting joint. Most cast options are outdated and flanges provided to modern specifications are made from plate or forged carbon steel or titanium. Before you buy flanges, it is important to note that these flanges come in different measurements, diameters, sizes, types, and materials. Several types of flanges are available for different types of uses. Therefore, you have to choose your product on a per-project basis. When we talk about the materials to use in your applications, a range of factors come into play. Therefore, some crucial aspects that are required to be considered while buying titanium flanges. For detailed measurements of titanium flanges, refer to weight and dimensions chart PDF with mm and kg units displayed below.

Titanium Flanges Types

• 1. TITANIUM SLIP-ON FLANGES - The bore size of the titanium slip-on flange as a standard is slightly larger than the outside diameter of the connecting pipe, as the pipe has to slide inside the flange then needs to be connected by the execution of the fillet weld around the border. Titanium slip-on flanges weight and dimensions chart gives detailed data about these flanges.
• 2. TITANIUM WELD NECK FLANGES - Titanium weld neck flanges are helpful in high/low-temperature applications and high-pressures that require an unlimited fluid flow conveyed by the piping system. These butt-weld end connection flanges are most usual in industrial applications to ensure a high strength connection between assemblies. Titanium weld neck flanges weight and dimensions chart gives detailed data about these flanges.
• 3. TITANIUM BLIND FLANGES - Most piping systems require regular audit and blind/blank flanges are most usual inspection point. This titanium blind flanges, when selected according to the suitable pressure class, can easily handle the tension caused by the liquid’s operating pressure and pressure flowing through the pipe. They are useful to ‘blank off’ valves, pipelines, etc. in almost all applications. Titanium blind flanges weight and dimensions chart gives detailed data about these flanges.
• 4. TITANIUM THREADED FLANGES - You can build the titanium threaded flanges without welding, and hence it is easy to remove. You do not have to use it for usages where bending stresses involve high pressure or temperatures. A seal weld is useful in combination with times. Titanium threaded flanges weight and dimensions chart gives detailed data about these flanges.
• 5. TITANIUM LAP JOINT FLANGES - Lap joint flanges is a type of slip-on flange but made for connecting to a stub end for rotation. Lap joints are helpful to keep carbon/low alloy steel pipes with additional mechanical properties. Titanium lap joint flanges are similar to slip-on flanges but are characterized by the radius-rounded interior edge of the flange face and generally come with a taller hub. Titanium lap joint flanges weight and dimensions chart gives detailed data about these flanges.
• 6. TITANIUM SOCKET-WELD FLANGES - Smaller diameter socket weld and counter bore flanges handle the applications with high pressures like steam lines but with restricted spacing. You must ensure toughness possess internal welds—the bore of the pipe and flange match provides a good flow connection. Titanium socket-weld flanges weight and dimensions chart gives detailed data about these flanges.

Titanium Flanges Specifications

Titanium flanges specifications are accessible in numerous grades. Titanium flanges are manufactured in accordance with a variety of standards, including ASTM A182, ASTM A815, ANSI/ASME B16.5, DIN 55014 and BS EN 1092-1, with pressure ratings from Class 150, 300, 600, 2500 and beyond. Titanium flanges are available in a wide range of sizes to accommodate different pipe diameters and system requirements. Refer to weight and dimensions chart PDF given in mm and kg, for knowing more in details about flange sizes and specifications.

ANSI B16.5 Class 150 Flanges Weight and Dimension Chart (mm, kg)

Nominal Pipe Size (inches)	Class 150
	Diameter of Flange (inches)	No. of Bolts	Diameter of Bolts (inches)	Diameter of Bolt Holes (inches)	Bolt Circle (inches)
1/4	3-3/8	4	1/2	0.62	2-1/4
1/2	3-1/2	4	1/2	0.62	2-3/8
3/4	3-7/8	4	1/2	0.62	2-3/4
1	4-1/4	4	1/2	0.62	3-1/8
1-1/4	4-5/8	4	1/2	0.62	3-1/2
1-1/2	5	4	1/2	0.62	3-7/8
2	6	4	5/8	0.75	4-3/4
2-1/2	7	4	5/8	0.75	5-1/2
3	7-1/2	4	5/8	0.75	6
3-1/2	8-1/2	8	5/8	0.75	7
4	9	8	5/8	0.75	7-1/2
5	10	8	3/4	0.88	8-1/2
6	11	8	3/4	0.88	9-1/2
8	13-1/2	8	3/4	0.88	11-3/4
10	16	12	7/8	1	14-1/4
12	19	12	7/8	1	17
14	21	12	1	1.12	18-3/4
16	23-1/2	16	1	1.12	21-1/4
18	25	16	1-1/8	1.25	22-3/4
20	27-1/2	20	1-1/8	1.25	25
24	32	20	1-1/4	1.38	29-1/2

ANSI B16.5 Class 300 Flanges Weight and Dimension Chart (mm, kg)

Nominal Pipe Size NPS (inches)	Class 300
	Diameter of Flange (inches)	No. of Bolts	Diameter of Bolts (inches)	Diameter of Bolt Holes (inches)	Bolt Circle (inches)
1/4	3-3/8	4	1/2	0.62	2-1/4
1/2	3-3/4	4	1/2	0.62	2-5/8
3/4	4-5/8	4	5/8	0.75	3-1/4
1	4-7/8	4	5/8	0.75	3-1/2
1-1/4	5-1/4	4	5/8	0.75	3-7/8
1-1/2	6-1/8	4	3/4	0.88	4-1/2
2	6-1/2	8	5/8	0.75	5
2-1/2	7-1/2	8	3/4	0.88	5-7/8
3	8-1/4	8	3/4	0.88	6-5/8
3-1/2	9	8	3/4	0.88	7-1/4
4	10	8	3/4	0.88	7-7/8
5	11	8	3/4	0.88	9-1/4
6	12-1/2	12	3/4	0.88	10-5/8
8	15	12	7/8	1	13
10	17-1/2	16	1	1.12	15-1/4
12	20-1/2	16	1-1/8	1.25	17-3/4
14	23	20	1-1/8	1.25	20-1/4
16	25-1/2	20	1-1/4	1.38	22-1/2
18	28	24	1-1/4	1.38	24-3/4
20	30-1/2	24	1-1/4	1.38	27
24	36	24	1-1/2	1.62	32

ANSI B16.5 Class 400 Flanges Weight and Dimension Chart (mm, kg)

Nominal Pipe Size NPS (inches)	Class 400
	Diameter of Flange (inches)	No. of Bolts	Diameter of Bolts (inches)	Diameter of Bolt Holes (inches)	Bolt Circle (inches)
1/4	3-3/8	4	1/2	0.62	2-1/4
1/2	3-3/4	4	1/2	0.62	2-5/8
3/4	4-5/8	4	5/8	0.75	3-1/4
1	4-7/8	4	5/8	0.75	3-1/2
1-1/4	5-1/4	4	5/8	0.75	3-7/8
1-1/2	6-1/8	4	3/4	0.88	4-1/2
2	6-1/2	8	5/8	0.75	5
2-1/2	7-1/2	8	3/4	0.88	5-7/8
3	8-1/4	8	3/4	0.88	6-5/8
3-1/2	9	8	7/8	1	7-1/4
4	10	8	7/8	1	7-7/8
5	11	8	7/8	1	9-1/4
6	12-1/2	12	7/8	1	10-5/8
8	15	12	1	1.12	13
10	17-1/2	16	1-1/8	1.25	15-1/4
12	20-1/2	16	1-1/4	1.38	17-3/4
14	23	20	1-1/4	1.38	20-1/4
16	25-1/2	20	1-3/8	1.5	22-1/2
18	28	24	1-3/8	1.5	24-3/4
20	30-1/2	24	1-1/2	1.62	27
24	36	24	1-3/4	1.88	32

ANSI B16.5 Class 600 Flanges Weight and Dimension Chart (mm, kg)

Nominal Pipe Size NPS (inches)	Class 600
	Diameter of Flange (inches)	No. of Bolts	Diameter of Bolts (inches)	Diameter of Bolt Holes (inches)	Bolt Circle (inches)
1/4	3-3/8	4	1/2	0.62	2-1/4
1/2	3-3/4	4	1/2	0.62	2-5/8
3/4	4-5/8	4	5/8	0.75	3-1/4
1	4-7/8	4	5/8	0.75	3-1/2
1-1/4	5-1/4	4	5/8	0.75	3-7/8
1-1/2	6-1/8	4	3/4	0.88	4-1/2
2	6-1/2	8	5/8	0.75	5
2-1/2	7-1/2	8	3/4	0.88	5-7/8
3	8-1/4	8	3/4	0.88	6-5/8
3-1/2	9	8	7/8	1	7-1/4
4	10-3/4	8	7/8	1	8-1/2
5	13	8	1	1.12	10-1/2
6	14	12	1	1.12	11-1/2
8	16-1/2	12	1-1/8	1.25	13-3/4
10	20	16	1-1/4	1.38	17
12	22	20	1-1/4	1.38	19-1/4
14	23-3/4	20	1-3/8	1.5	20-3/4
16	27	20	1-1/2	1.62	23-3/4
18	29-1/4	20	1-5/8	1.75	25-3/4
20	32	24	1-5/8	1.75	28-1/2
24	37	24	1-7/8	2	33

ANSI B16.5 Class 900 Flanges Weight and Dimension Chart (mm, kg)

Nominal Pipe Size NPS (inches)	Class 900
	Diameter of Flange (inches)	No. of Bolts	Diameter of Bolts (inches)	Diameter of Bolt Holes (inches)	Bolt Circle (inches)
1/2	4-3/4	4	3/4	0.88	3-1/4
3/4	5-1/8	4	3/4	0.88	3-1/2
1	5-7/8	4	7/8	1	4
1-1/4	6-1/4	4	7/8	1	4-3/8
1-1/2	7	4	1	1.12	4-7/8
2	8-1/2	8	7/8	1	6-1/2
2-1/2	9-5/8	8	1	1.12	7-1/2
3	9-1/2	8	7/8	1	7-1/2
4	11-1/2	8	1-1/8	1.25	9-1/4
5	13-3/4	8	1-1/4	1.38	11
6	15	12	1-1/8	1.25	12-1/2
8	18-1/2	12	1-3/8	1.5	15-1/2
10	21-1/2	16	1-3/8	1.5	18-1/2
12	24	20	1-3/8	1.5	21
14	25-1/4	20	1-1/2	1.62	22
16	27-3/4	20	1-5/8	1.75	24-1/2
18	31	20	1-7/8	2	27
20	33-3/4	20	2	2.12	29-1/2
24	41	20	2-1/2	2.62	35-1/2

ANSI B16.5 Class 2500 Flanges Weight and Dimension Chart (mm, kg)

Nominal Pipe Size NPS (inches)	Class 2500
	Diameter of Flange (inches)	No. of Bolts	Diameter of Bolts (inches)	Diameter of Bolt Holes (inches)	Bolt Circle (inches)
1/2	5-1/4	4	3/4	0.88	3-1/2
3/4	5-1/2	4	3/4	0.88	3-3/4
1	6-1/4	4	7/8	1	4-1/4
1-1/4	7-1/4	4	1	1.12	5-1/8
1-1/2	8	4	1-1/8	1.25	5-3/4
2	9-1/4	8	1	1.12	6-3/4
2-1/2	10-1/2	8	1-1/8	1.25	7-3/4
3	12	8	1-1/4	1.38	9
4	14	8	1-1/2	1.62	10-3/4
5	16-1/2	8	1-3/4	1.88	12-3/4
6	19	8	2	2.12	14-1/2
8	21-3/4	12	2	2.12	17-1/4
10	26-1/2	12	2-1/2	2.62	21-1/4
12	30	12	2-3/4	2.88	24-3/8