Aluminum pipes are hollow cylindrical tubes made from aluminum, a lightweight and corrosion-resistant metal. Aluminum pipes can be manufactured from various aluminum alloys, each with its own set of properties. They find application in various industries due to their unique and beneficial properties, including their lightweight nature, excellent corrosion resistance, and ease of fabrication. The applications where aluminum pipes are used are aviation industry, construction, transportation, fluid Transfer, HVAC, electrical conduits, and DIY projects. Aluminum pipes are available in various sizes and dimensions to fit in different applications. The diameter (or "nominal size") and wall thickness (schedule) are the important factors that determine a pipe's dimensions. Aluminium pipe weight and dimensions chart PDF in mm, kg contain all information needed related to sizes and dimensions. Aluminum pipes can have various finishes, including plain (mill finish), anodized, or powder-coated, depending on the intended use and aesthetic requirements. The cost of aluminum pipes can change depending on the alloy, size, and finish. In general, aluminium is more expensive than steel but can be cost-effective and profitable due to its other benefits.
The basic aluminium pipe types are:
This type of pipe is made from a solid billet of aluminum and has no welds. It is the strongest and most tough type of aluminum pipe. Seamless aluminum pipe dimensions chart are in mm, kg.
This type of pipe is made from two or more pieces of aluminum that are welded together. It is less expensive than seamless aluminum pipe, but it is also less strong and tough. For detailed dimensions, refer to dimensions chart below.
This type of pipe is made by drawing a tube of aluminum through a series of dies. It is very accurate and has a smooth surface. Drawn aluminum pipe weight, dimensions chart in mm, kg is displayed below.
The aluminium pipe properties are:
Grades: | 5083, 6061, 6082, 7075, 7001, 7045, 7050, 3003, 2014, 2024, 2017, 2011, 1200 |
---|---|
Size: | 15mm NB to 150mm NB (1/2” to 6”), 7″ (193.7mm OD to 20″ 508mm OD) |
Form | Round, Square, Rectangular, Coil, U Tube, |
Length | As per customer’s requirement (Maximum upto 7 meters) |
End | Plain End, Bevelled End |
Type | Seamless / ERW / Welded |
Surface | Black painting, varnish paint, anti rust oil, hot galvanized, cold galvanized, 3PE |
Test | Chemical Component Analysis, Mechanical Properties (Ultimate tensile strength,
Yield strength, Elongation), Technical Properties (Flattening Test, Flaring Test, Bending Test, Hardness Test, Blow Test, Impact Test etc), Exterior Size Inspection |
OD Range | 1.250″ – 6.000″ (30-150mm) |
Wall Range | 0.095″ – 1.000″ (.2.5-25mm) |
Mill Test Certificate | EN 10204/3.1B |
OM SIZE | OUTSIDE DIA (D) |
WALL THICKNESS IN MM (T) | METRIC SIZE | ||||||
---|---|---|---|---|---|---|---|---|---|
SCH 10S | SCH 10 | SCH 40 S |
STD Weight | SCH 40 | SCH 80s | SCH 80 | |||
1/4 “ | 13.72 | 1.65 | 2.24 | 2.24 | 2.24 | 3.02 | 3.02 | ||
3/8″ | 17.15 | 1.65 | 2.31 | 2.31 | 2.31 | 3.2 | 3.2 | ||
1/2″ | 21.34 | 2.11 | 2.77 | 2.77 | 2.77 | 3.73 | 3.73 | 15 | |
3/4″ | 26.67 | 2.11 | 2.87 | 2.87 | 2.87 | 3.91 | 3.91 | 20 | |
1″ | 33.4 | 2.77 | 3.38 | 3.38 | 3.38 | 4.55 | 4.55 | 25 | |
1 1/4″ | 42.16 | 2.77 | 3.56 | 3.56 | 3.56 | 4.85 | 4.85 | 32 | |
1 1/2″ | 48.26 | 2.77 | 3.68 | 3.68 | 3.68 | 5.08 | 5.08 | 40 | |
2″ | 60.32 | 2.77 | 3.91 | 3.91 | 3.91 | 5.54 | 5.54 | 50 | |
2 1/2″ | 73.02 | 3.05 | 5.16 | 5.16 | 5.16 | 7.01 | 7.01 | 65 | |
3″ | 88.9 | 3.05 | 5.49 | 5.49 | 5.49 | 7.62 | 7.62 | 80 | |
3 1/2″ | 101.6 | 3.05 | 5.74 | 5.74 | 5.74 | 8.08 | 8.08 | 90 | |
4″ | 114.3 | 3.05 | 6.02 | 6.02 | 6.02 | 8.56 | 8.56 | 100 | |
5″ | 141.3 | 3.4 | 6.55 | 6.55 | 6.55 | 9.52 | 9.52 | 125 | |
6″ | 168.27 | 3.4 | 7.11 | 7.11 | 7.11 | 10.97 | 10.97 | 150 | |
8″ | 219.07 | 3.76 | 8.18 | 8.18 | 8.18 | 12.7 | 12.7 | 200 | |
10″ | 273.05 | 4.19 | 9.27 | 9.27 | 9.27 | 12.7 | 15.08 | 250 | |
12″ | 323.85 | 4.57 | 9.52 | 9.52 | 10.31 | 12.7 | 17.47 | 300 | |
14″ | 355.6 | 4.77 | 6.35 | 9.52 | 11.12 | 19.05 | 350 | ||
16″ | 404.6 | 4.77 | 6.35 | 9.52 | 12.7 | 21.44 | 400 | ||
18″ | 457.2 | 4.77 | 6.35 | 9.52 | 14.27 | 23.82 | 450 |
Grade | Si | Fe | Cu | Zn | Mn | Mg | Ti | Cr | Al | Others(Total) |
---|---|---|---|---|---|---|---|---|---|---|
Aluminium | 0.40 – 0.80 | 0.70 max | 0.15-0.40 | 0.25 max | 0.15 | 0.8-1.2 | 0.15 max | 0.04-0.35 | Balance | 0.15 max |
Temper | Tensile | Hardness | ||||
---|---|---|---|---|---|---|
Ultimate | Yield | Elongation | Brinell | |||
KSI | MPA | KSI | MPA | % | ||
T6, T651 | 45 | 310 | 21 | 145 | 25 | 65 |
Physical Property | Value |
---|---|
Density | 2,70 g/cm³ |
Melting Point | 582 °C |
Thermal Expansion | 23.4 x 10^-6 /K |
Modulus of Elasticity | 69 GPa |
Thermal Conductivity | 170 W/m.K |
Electrical Resistivity | %43 IACS |
OM SIZE | OUTSIDE DIA (D) |
WALL THICKNESS IN MM (T) | METRIC SIZE | ||||||
---|---|---|---|---|---|---|---|---|---|
SCH 10S | SCH 10 | SCH 40 S |
STD Weight | SCH 40 | SCH 80s | SCH 80 | |||
1/4 “ | 13.72 | 1.65 | 2.24 | 2.24 | 2.24 | 3.02 | 3.02 | ||
3/8″ | 17.15 | 1.65 | 2.31 | 2.31 | 2.31 | 3.2 | 3.2 | ||
1/2″ | 21.34 | 2.11 | 2.77 | 2.77 | 2.77 | 3.73 | 3.73 | 15 | |
3/4″ | 26.67 | 2.11 | 2.87 | 2.87 | 2.87 | 3.91 | 3.91 | 20 | |
1″ | 33.4 | 2.77 | 3.38 | 3.38 | 3.38 | 4.55 | 4.55 | 25 | |
1 1/4″ | 42.16 | 2.77 | 3.56 | 3.56 | 3.56 | 4.85 | 4.85 | 32 | |
1 1/2″ | 48.26 | 2.77 | 3.68 | 3.68 | 3.68 | 5.08 | 5.08 | 40 | |
2″ | 60.32 | 2.77 | 3.91 | 3.91 | 3.91 | 5.54 | 5.54 | 50 | |
2 1/2″ | 73.02 | 3.05 | 5.16 | 5.16 | 5.16 | 7.01 | 7.01 | 65 | |
3″ | 88.9 | 3.05 | 5.49 | 5.49 | 5.49 | 7.62 | 7.62 | 80 | |
3 1/2″ | 101.6 | 3.05 | 5.74 | 5.74 | 5.74 | 8.08 | 8.08 | 90 | |
4″ | 114.3 | 3.05 | 6.02 | 6.02 | 6.02 | 8.56 | 8.56 | 100 | |
5″ | 141.3 | 3.4 | 6.55 | 6.55 | 6.55 | 9.52 | 9.52 | 125 | |
6″ | 168.27 | 3.4 | 7.11 | 7.11 | 7.11 | 10.97 | 10.97 | 150 | |
8″ | 219.07 | 3.76 | 8.18 | 8.18 | 8.18 | 12.7 | 12.7 | 200 | |
10″ | 273.05 | 4.19 | 9.27 | 9.27 | 9.27 | 12.7 | 15.08 | 250 | |
12″ | 323.85 | 4.57 | 9.52 | 9.52 | 10.31 | 12.7 | 17.47 | 300 | |
14″ | 355.6 | 4.77 | 6.35 | 9.52 | 11.12 | 19.05 | 350 | ||
16″ | 404.6 | 4.77 | 6.35 | 9.52 | 12.7 | 21.44 | 400 | ||
18″ | 457.2 | 4.77 | 6.35 | 9.52 | 14.27 | 23.82 | 450 |
OD or Leg Length | Wall | Gauge | ID | Weight/ft. |
---|---|---|---|---|
3/16 in. | .035 in. | 20 | .117 in. | .019 lb. |
.049 | 18 | .089 | .025 | |
1/4 | .035 | 20 | .180 | .027 |
.049 | 18 | .152 | .036 | |
.058 | 17 | .134 | .041 | |
5/16 | .035 | 20 | .242 | .036 |
.049 | 18 | .214 | .047 | |
.058 | 17 | .196 | .055 | |
3/8 | .035 | 20 | .305 | .043 |
.049 | 18 | .277 | .060 | |
.058 | 17 | .259 | .068 | |
.065 | 16 | .245 | .074 | |
7/16 | .035 | 20 | .367 | .051 |
.049 | 18 | .339 | .070 | |
.065 | 16 | .307 | .089 | |
1/2 | .028 | 22 | .444 | .049 |
.035 | 20 | .430 | .059 | |
.049 | 18 | .402 | .082 | |
.058 | 17 | .384 | .095 | |
.065 | 16 | .370 | .107 | |
5/8 | .028 | 22 | .569 | .061 |
.035 | 20 | .555 | .075 | |
.049 | 18 | .527 | .106 | |
.058 | 17 | .509 | .121 | |
.065 | 16 | .495 | .137 | |
3/4 | .035 | 20 | .680 | .091 |
.049 | 18 | .652 | .125 | |
.058 | 17 | .634 | .148 | |
.065 | 16 | .620 | .160 | |
.083 | 14 | .584 | .204 | |
7/8 | .035 | 20 | .805 | .108 |
.049 | 18 | .777 | .151 | |
.058 | 17 | .759 | .175 | |
.065 | 16 | .745 | .199 | |
1 | .035 | 20 | .930 | .123 |
.049 | 18 | .902 | .170 | |
.058 | 17 | .884 | .202 | |
.065 | 16 | .870 | .220 | |
.083 | 14 | .834 | .281 | |
1 1/8 | .035 | 20 | 1.055 | .139 |
.058 | 17 | 1.009 | .228 | |
1 1/4 | .035 | 20 | 1.180 | .155 |
.049 | 18 | 1.152 | .210 | |
.058 | 17 | 1.134 | .256 | |
.065 | 16 | 1.120 | 284 | |
.083 | 14 | 1.084 | .357 | |
1 3/8 | .035 | 20 | 1.305 | .173 |
.058 | 17 | 1.259 | .282 | |
1 1/2 | .035 | 20 | 1.430 | .180 |
.049 | 18 | 1.40 | .260 | |
.058 | 17 | 1.384 | .309 | |
.065 | 16 | 1.370 | .344 | |
.083 | 14 | 1.334 | .434 | |
.125 | 1/8 | 1.250 | .630 | |
.250 | 1/4 | 1.000 | 1.150 | |
1 5/8 | .035 | 20 | 1.555 | .206 |
.058 | 17 | 1.509 | .336 | |
1 3/4 | .058 | 17 | 1.634 | .363 |
.083 | 14 | 1.584 | .510 | |
1 7/8 | .508 | 17 | 1.759 | .389 |
2 | .049 | 18 | 1.902 | .350 |
.065 | 16 | 1.870 | .450 | |
.083 | 14 | 1.834 | .590 | |
.125 | 1/8 | 1.750 | .870 | |
.250 | 1/4 | 1.500 | 1.620 | |
2 1/4 | .049 | 18 | 2.152 | .398 |
.065 | 16 | 2.120 | .520 | |
.083 | 14 | 2.084 | .660 | |
2 1/2 | .065 | 16 | 2.370 | .587 |
.083 | 14 | 2.334 | .740 | |
.125 | 1/8 | 2.250 | 1.100 | |
.250 | 1/4 | 2.000 | 2.080 | |
3 | .065 | 16 | 2.870 | .710 |
.125 | 1/8 | 2.700 | 1.330 | |
.250 | 1/4 | 2.500 | 2.540 |
OD or Leg Length | Wall | Gauge | ID | Weight/ft. |
---|---|---|---|---|
.500 x 1 in. | .093 in. | .293 lb. | ||
.500 x 2 | .125 | .672 | ||
.750 x 1.500 | .062 | .319 | ||
.125 | .600 | |||
.750 x 1.750 | .125 | .600 | ||
1 x 1.500 | .125 | .675 | ||
1 x 2 | .062 | .428 | ||
.075 | .499 | |||
.083 | .554 | |||
.093 | .628 | |||
.125 | .826 | |||
1 x 3 | .062 | .577 | ||
.125 | 1.125 | |||
1 x 4 | .062 | .725 | ||
.125 | 1.425 | |||
1 x 5 | .125 | .976 | ||
1 x 6 | .125 | 2.026 | ||
1.250 x 2.500 | .125 | 1.050 | ||
1.500 x 2 | .125 | .976 | ||
.188 | 1.406 | |||
1.500 x 3 | .125 | 1.272 | ||
1.750 x 3 | .125 | 1.350 | ||
1.750 x 4 | .093 | 1.242 | ||
.125 | 1.650 | |||
2 x 2.50 | .125 | 1.275 | ||
2 x 3 | .093 | 1.075 | ||
.125 | 1.426 | |||
.188 | 2.086 | |||
.250 | 2.700 | |||
2 x 4 | .125 | 1.724 | ||
.250 | 3.300 | |||
2 x 5 | .093 | 1.520 | ||
.125 | 2.025 | |||
.250 | 3.900 | |||
2 x 6 | .125 | 2.327 | ||
.188 | 3.440 | |||
.250 | 4.500 | |||
2 x 7 | .125 | 2.624 | ||
2 x 8 | .125 | 2.925 | ||
.250 | 5.700 | |||
2 x 10 | .125 | 3.541 | ||
.250 | 6.900 | |||
2 x 12 | .188 | 6.210 | ||
2.5 x 3 | .125 | 1.574 | ||
2.5 x 7 | .125 | 3.115 | ||
2.5 x 9 | .250 | 6.468 | ||
2.5 x 12 | .250 | 8.400 | ||
3 x 4 | .125 | 2.026 | ||
3 x 6 | .125 | 2.625 | ||
.188 | 3.891 | |||
.250 | 5.100 | |||
3 x 8 | .188 | 4.794 | ||
3 x 10 | .125 | 3.824 | ||
3 x 12 | .188 | 6.613 | ||
4 x 6 | .125 | 2.925 | ||
.188 | 4.256 | |||
.250 | 5.700 | |||
4 x 8 | .250 | 6.900 | ||
4 x 10 | .250 | 8.036 | ||
4 x 12 | .250 | 9.3 | ||
5 x 10 | .250 | 9.752 | ||
6 x 8 | .188 | 6.196 | ||
.500 | 15.286 | |||
6 x 10 | .19 | 7.171 | ||
OD or Leg Length | Wall | Gauge | ID | Weight/ft. |
---|---|---|---|---|
.500 in. | .062 | .131 lb. | ||
.625 | .062 | .168 | ||
.750 | .040 | .131 | ||
.045 | .145 | |||
.062 | .206 | |||
.093 | .293 | |||
1/8 | .374 | |||
1 | .062 | .278 | ||
.075 | .317 | |||
.093 | .405 | |||
.125 | .524 | |||
1.250 | .062 | .353 | ||
.093 | .506 | |||
.125 | .675 | |||
1.500 | .062 | .420 | ||
.090 | .632 | |||
.125 | .824 | |||
.188 | 1.184 | |||
.250 | 1.500 | |||
1.750 | .093 | .732 | ||
.125 | .975 | |||
2 | .062 | .604 | ||
.093 | .851 | |||
.125 | 1.126 | |||
.188 | 1.627 | |||
.250 | 2.052 | |||
2.250 | .095 | .982 | ||
2.500 | .075 | .855 | ||
.093 | 1.074 | |||
.125 | 1.425 | |||
.188 | 2.076 | |||
.375 | 3.824 | |||
3 | .093 | 1.298 | ||
.125 | 1.726 | |||
.188 | 2.533 | |||
.250 | 3.300 | |||
3.5 | .230 | 3.610 | ||
4 | .125 | 2.324 | ||
.150 | 2.772 | |||
.250 | 4.500 | |||
4.5 | .093 | 1.955 | ||
5 | .125 | 2.925 | ||
.250 | 5.700 | |||
6 | .125 | 3.525 | ||
.250 | 6.900 | |||
.500 | 12.936 | |||
7 | .156 | 5.120 | ||
8 | .188 | 7.050 | ||
10 | .250 | 11.7 |