ASME B16.11-2011 Stainless Steel Forged Fitting Weight, Dimensions Chart in mm, kg, PDF online
Stainless steel forged fittings are important components of some industrial or commercial systems, making
the joining of two or more pipes, possible. The manufacturing process of stainless steel forged fittings
involves the application of thermal and mechanical energy to shape solid stainless steel blanks into
functional shapes within the limits established by the applicable techniques. These forged fittings are
available in a broad range of sizes and diameters, and there are several shapes of forged fittings to
serve to any type of pipe joint. Stainless steel forged fittings should also be lightweight, but
durable, strong and abrasion-resistant during high-temperature services or difficult weather conditions.
Also, stainless steel forged fittings should be suitable for installing high-pressure (3,000lb, 6,000lb,
and 9,000lb) piping systems. Each fitting has a class grading of 3000, 6000, or 9000, representing the
maximum pressure that the stainless steel forged fitting can handle. For detailed measurements, refer to
Dimensions Chart below.
Stainless Steel Forged Fittings Types
There are two basic types of stainless steel forged fittings, namely:
-
Threaded stainless steel forged fittings - With threaded stainless steel fittings,
pipe and fitting join to each other using threaded sections or parts. Stainless Steel Forged
Fittings Weight can be measured in kg. One or both components must be
rotated or revolved to engage the threads and fully close any gap between them. The strength of the
joint depends on the strength of the engaged threads. Threaded pipe forged fittings are proper for
applications such as cooling, fire protection and water distribution. If the pipe system manages
fluids with frequently changing temperatures, threaded pipe fittings are not perfect as temperature
change can cause the fitting to crack in the thread forms.
-
Socket weld stainless steel forged fittings - With socket weld fittings, the
fitting connects to the pipe with pipe entering a shallow hole in the fitting. The gap is then
closed with a “fillet weld” which involves heating and filler metal to provide a seal, metal is
melted and solidified again to close the gap. Socket weld forged fittings may be called to be more
permanent than threaded forged fittings. The drawback of fittings of this type is the time and hard
efforts for installation. Stainless Steel Forged Fittings can be measured in Dimensions in mm, kg.
Typical applications for socket weld forged fittings include steam and
other gases, toxic fluids and acids, and explosive liquids and gases where highest connection
strength and leakage prevention is necessary.
Stainless steel forged fittings are available in different shapes and sizes including 45-degree elbows,
90-degree elbows, tees – which can be equal (straight) or reducing, lateral or Y-shaped pipe fittings to
branch a pipe at about 30 degrees, cross fittings to connect four pipes, plugs or caps to blind pipes,
half or
full couplings to join pipes, and reducer inserts to reduce the bore size. Refer Stainless Steel Forged
Fittings Dimensions Chart below.
Stainless Steel Forged Fittings Specifications
The ASME B16.11 specifications cover forged fittings to fit ASME B36.10 and ASME B36.19 pipes. This
specification covers the material requirements, dimensions, ratings, marking, and limitations and
strength for socket weld forged fittings and threaded forged fittings. Users should apply B16.11
specifications in conjunction with equipment that other volumes of the ASME B16 series of standards
describe. Dimensions Chart is in mm, kg dimensions.
ASTM A182 is another specification that used for forged pipe fittings. Specifically, ASTM A182 covers
forged fittings, forged or rolled alloy pipe flanges, stainless steel pipe flanges, valves and other
parts for high-temperature service. ASTM A182 also applies to forged fittings for application in
pressure
systems. Stainless Steel Forged Fittings Dimensions Chart is given below.
ASME B16.11-2011 Threaded Elbow 45° Weight and Dimension Chart (mm, kg)
| DN |
Nom. Pipe Size |
Center to End A |
Outside Diameter Of Band H |
Minimum Wall Thickness G |
Length of Thread(Min) |
| 2M |
3M |
6M |
2M |
3M |
6M |
2M |
3M |
6M |
B(1) |
L2(1) |
| 6 |
1/8” |
17 |
17 |
19 |
22 |
22 |
25 |
3.18 |
3.18 |
6.35 |
6.4 |
6.7 |
| 8 |
1/4” |
17 |
19 |
22 |
22 |
25 |
33 |
3.18 |
3.30 |
6.60 |
8.1 |
10.2 |
| 10 |
3/8” |
19 |
22 |
25 |
25 |
33 |
38 |
3.18 |
3.51 |
6.98 |
9.1 |
10.4 |
| 15 |
1/2” |
22 |
25 |
28 |
33 |
38 |
46 |
3.18 |
4.09 |
8.15 |
10.9 |
13.6 |
| 20 |
3/4” |
25 |
28 |
33 |
38 |
46 |
56 |
3.18 |
4.32 |
8.53 |
12.7 |
13.9 |
| 25 |
1” |
28 |
33 |
35 |
46 |
56 |
62 |
3.68 |
4.98 |
9.93 |
14.7 |
17.3 |
| 32 |
1-1/4” |
33 |
35 |
43 |
56 |
62 |
75 |
3.89 |
5.28 |
10.59 |
17.0 |
18.0 |
| 40 |
1-1/2” |
35 |
43 |
44 |
62 |
75 |
84 |
4.01 |
5.56 |
11.07 |
17.8 |
18.4 |
| 50 |
2” |
43 |
44 |
52 |
75 |
84 |
102 |
4.27 |
7.14 |
12.09 |
19.0 |
19.2 |
| 65 |
2-1/2” |
52 |
52 |
64 |
92 |
102 |
121 |
5.61 |
7.65 |
15.29 |
23.6 |
28.9 |
| 80 |
3” |
64 |
64 |
79 |
109 |
121 |
146 |
5.99 |
8.84 |
16.64 |
25.9 |
30.5 |
| 100 |
4” |
79 |
79 |
79 |
146 |
152 |
152 |
6.55 |
11.18 |
18.67 |
27.7 |
33.0 |
ASME B16.11-2011 Threaded Street Elbow Weight and Dimension Chart (mm, kg)
| DN |
Nom. Pipe Size |
H |
A |
J |
G1(Min) |
G2(1)(Min) |
B(2)(Min) |
L2(2)(Min) |
L (Min) |
| 3M |
6M |
3M |
6M |
3M |
6M |
3M |
6M |
3M |
6M |
| 6 |
1/8” |
19 |
25 |
19 |
22 |
25 |
32 |
3.18 |
5.08 |
2.74 |
4.22 |
6.4 |
6.7 |
10.0 |
| 8 |
1/4” |
25 |
32 |
22 |
25 |
32 |
38 |
3.30 |
5.66 |
3.22 |
5.28 |
8.1 |
10.2 |
11.0 |
| 10 |
3/8” |
32 |
38 |
25 |
28 |
38 |
41 |
3.50 |
6.98 |
3.50 |
5.59 |
9.1 |
10.4 |
13.0 |
| 15 |
1/2” |
38 |
44 |
28 |
35 |
41 |
48 |
4.09 |
8.15 |
4.16 |
6.53 |
10.9 |
13.6 |
14.0 |
| 20 |
3/4” |
44 |
51 |
35 |
44 |
48 |
57 |
4.32 |
8.53 |
4.88 |
6.86 |
12.7 |
13.9 |
16.0 |
| 25 |
1” |
51 |
62 |
44 |
51 |
57 |
66 |
4.98 |
9.93 |
5.56 |
7.95 |
14.7 |
17.3 |
19.0 |
| 32 |
1-1/4” |
62 |
70 |
51 |
54 |
66 |
71 |
5.28 |
10.59 |
5.56 |
8.48 |
17.0 |
18.0 |
21.0 |
| 40 |
1-1/2” |
70 |
84 |
54 |
64 |
71 |
84 |
5.56 |
11.07 |
6.25 |
8.89 |
17.8 |
18.4 |
21.0 |
| 50 |
2” |
84 |
102 |
64 |
83 |
84 |
105 |
7.14 |
12.09 |
7.64 |
9.70 |
19.0 |
19.0 |
22.0 |
ASME B16.11-2011 Threaded Tee Weight and Dimension Chart (mm, kg)
| DN |
Nom. Pipe Size |
Center to End A |
Outside Diameter Of Band H |
Minimum Wall Thickness G |
Length of Thread(Min) |
| 2M |
3M |
6M |
2M |
3M |
6M |
2M |
3M |
6M |
B(1) |
L2(1) |
| 6 |
1/8” |
21 |
21 |
25 |
22 |
22 |
25 |
3.18 |
3.18 |
6.35 |
6.4 |
6.7 |
| 8 |
1/4” |
21 |
25 |
28 |
22 |
25 |
33 |
3.18 |
3.30 |
6.60 |
8.1 |
10.2 |
| 10 |
3/8” |
25 |
28 |
33 |
25 |
33 |
38 |
3.18 |
3.51 |
6.98 |
9.1 |
10.4 |
| 15 |
1/2” |
28 |
33 |
38 |
33 |
38 |
46 |
3.18 |
4.09 |
8.15 |
10.9 |
13.6 |
| 20 |
3/4” |
33 |
38 |
44 |
38 |
46 |
56 |
3.18 |
4.32 |
8.53 |
12.7 |
13.9 |
| 25 |
1” |
38 |
44 |
51 |
46 |
56 |
62 |
3.68 |
4.98 |
9.93 |
14.7 |
17.3 |
| 32 |
1-1/4” |
44 |
51 |
60 |
56 |
62 |
75 |
3.89 |
5.28 |
10.59 |
17.0 |
18.0 |
| 40 |
1-1/2” |
51 |
60 |
64 |
62 |
75 |
84 |
4.01 |
5.56 |
11.07 |
17.8 |
18.4 |
| 50 |
2” |
60 |
64 |
83 |
75 |
84 |
102 |
4.27 |
7.14 |
12.09 |
19.0 |
19.2 |
| 65 |
2-1/2” |
76 |
83 |
95 |
92 |
102 |
121 |
5.61 |
7.65 |
15.29 |
23.6 |
28.9 |
| 80 |
3” |
86 |
95 |
106 |
109 |
121 |
146 |
5.99 |
8.84 |
16.64 |
25.9 |
30.5 |
| 100 |
4” |
106 |
114 |
114 |
146 |
152 |
152 |
6.55 |
11.18 |
18.67 |
27.7 |
33.0 |
ASME B16.11-2011 Threaded 45° Lateral Tee Weight and Dimension Chart (mm, kg)
| Nom. Pipe Size |
A |
E |
G (Min) |
H |
Length of Thread(Min) |
| 2000Lb |
3000Lb |
2000Lb |
3000Lb |
2000Lb |
3000Lb |
2000Lb |
3000Lb |
B(1) |
L2(1) |
| 1/2” |
46 |
55 |
20 |
23 |
3.18 |
4.09 |
33 |
38 |
10.9 |
13.6 |
| 3/4” |
55 |
65 |
23 |
26 |
3.18 |
4.32 |
38 |
46 |
12.7 |
13.9 |
| 1” |
65 |
73 |
26 |
31 |
3.68 |
4.98 |
46 |
56 |
14.7 |
17.3 |
| 1-1/4” |
73 |
82 |
31 |
35 |
3.89 |
5.28 |
56 |
62 |
17.0 |
18.0 |
| 1-1/2” |
82 |
113 |
35 |
42 |
4.01 |
5.56 |
62 |
75 |
17.8 |
18.4 |
| 2” |
113 |
136 |
42 |
56 |
4.27 |
7.14 |
75 |
84 |
19.0 |
19.2 |
| 2-1/2” |
136 |
- |
56 |
- |
5.61 |
- |
92 |
- |
23.6 |
28.9 |
ASME B16.11-2011 Threaded Cross Weight and Dimension Chart (mm, kg)
| DN |
Nom. Pipe Size |
Center to End A |
Outside Diameter Of Band H |
Minimum Wall Thickness G |
Length of Thread(Min) |
| 2M |
3M |
6M |
2M |
3M |
6M |
2M |
3M |
6M |
B(1) |
L2(1) |
| 6 |
1/8” |
21 |
21 |
25 |
22 |
22 |
25 |
3.18 |
3.18 |
6.35 |
6.4 |
6.7 |
| 8 |
1/4” |
21 |
25 |
28 |
22 |
25 |
33 |
3.18 |
3.30 |
6.60 |
8.1 |
10.2 |
| 10 |
3/8” |
25 |
28 |
33 |
25 |
33 |
38 |
3.18 |
3.51 |
6.98 |
9.1 |
10.4 |
| 15 |
1/2” |
28 |
33 |
38 |
33 |
38 |
46 |
3.18 |
4.09 |
8.15 |
10.9 |
13.6 |
| 20 |
3/4” |
33 |
38 |
44 |
38 |
46 |
56 |
3.18 |
4.32 |
8.53 |
12.7 |
13.9 |
| 25 |
1” |
38 |
44 |
51 |
46 |
56 |
62 |
3.68 |
4.98 |
9.93 |
14.7 |
17.3 |
| 32 |
1-1/4” |
44 |
51 |
60 |
56 |
62 |
75 |
3.89 |
5.28 |
10.59 |
17.0 |
18.0 |
| 40 |
1-1/2” |
51 |
60 |
64 |
62 |
75 |
84 |
4.01 |
5.56 |
11.07 |
17.8 |
18.4 |
| 50 |
2” |
60 |
64 |
83 |
75 |
84 |
102 |
4.27 |
7.14 |
12.09 |
19.0 |
19.2 |
| 65 |
2-1/2” |
76 |
83 |
95 |
92 |
102 |
121 |
5.61 |
7.65 |
15.29 |
23.6 |
28.9 |
| 80 |
3” |
86 |
95 |
106 |
109 |
121 |
146 |
5.99 |
8.84 |
16.64 |
25.9 |
30.5 |
| 100 |
4” |
106 |
114 |
114 |
146 |
152 |
152 |
6.55 |
11.18 |
18.67 |
27.7 |
33.0 |
ASME B16.11-2011 Threaded Full Coupling Weight and Dimension Chart (mm, kg)
| DN |
Nom. Pipe Size |
End to End Coupling W |
Outside Diameter D |
Length of Thread (Min) |
| 3000Lb |
6000Lb |
B(1) |
L2(1) |
| 6 |
1/8” |
32 |
16 |
22 |
6.4 |
6.7 |
| 8 |
1/4” |
35 |
19 |
25 |
8.1 |
10.2 |
| 10 |
3/8” |
38 |
22 |
32 |
9.1 |
10.4 |
| 15 |
1/2” |
48 |
28 |
38 |
10.9 |
13.6 |
| 20 |
3/4” |
51 |
35 |
44 |
12.7 |
13.9 |
| 25 |
1” |
60 |
44 |
57 |
14.7 |
17.3 |
| 32 |
1-1/4” |
67 |
57 |
64 |
17.0 |
18.0 |
| 40 |
1-1/2” |
79 |
64 |
76 |
17.8 |
18.4 |
| 50 |
2” |
86 |
76 |
92 |
19.0 |
19.2 |
| 65 |
2-1/2” |
92 |
92 |
108 |
23.6 |
28.9 |
| 80 |
3” |
108 |
108 |
127 |
25.9 |
30.5 |
| 100 |
4” |
121 |
140 |
159 |
27.7 |
33.0 |
ASME B16.11-2011 Threaded Half Coupling Weight and Dimension Chart (mm, kg)
| DN |
Nom. Pipe Size |
End to End Coupling W |
Outside Diameter D |
Length of Thread (Min) |
| 3000Lb |
6000Lb |
B(1) |
L2(1) |
| 6 |
1/8” |
32 |
16 |
22 |
6.4 |
6.7 |
| 8 |
1/4” |
35 |
19 |
25 |
8.1 |
10.2 |
| 10 |
3/8” |
38 |
22 |
32 |
9.1 |
10.4 |
| 15 |
1/2” |
48 |
28 |
38 |
10.9 |
13.6 |
| 20 |
3/4” |
51 |
35 |
44 |
12.7 |
13.9 |
| 25 |
1” |
60 |
44 |
57 |
14.7 |
17.3 |
| 32 |
1-1/4” |
67 |
57 |
64 |
17.0 |
18.0 |
| 40 |
1-1/2” |
79 |
64 |
76 |
17.8 |
18.4 |
| 50 |
2” |
86 |
76 |
92 |
19.0 |
19.2 |
| 65 |
2-1/2” |
92 |
92 |
108 |
23.6 |
28.9 |
| 80 |
3” |
108 |
108 |
127 |
25.9 |
30.5 |
| 100 |
4” |
121 |
140 |
159 |
27.7 |
33.0 |
ASME B16.11-2011 Threaded Reducing Coupling Weight and Dimension Chart (mm, kg)
| Nom. Pipe Size |
D |
W |
L1 |
L2 |
| 3000Lb |
6000Lb |
| 1/4”x1/8” |
19.0 |
25.0 |
35.0 |
11.4 |
8.8 |
| 3/8”x1/8” |
22.0 |
32.0 |
38.0 |
12.4 |
8.8 |
| 3/8”x1/4” |
22.0 |
32.0 |
38.0 |
12.4 |
11.4 |
| 1/2”x1/8” |
28.0 |
38.0 |
48.0 |
14.9 |
8.8 |
| 1/2”x1/4” |
28.0 |
38.0 |
48.0 |
14.9 |
11.4 |
| 1/2”x3/8” |
28.0 |
38.0 |
48.0 |
14.9 |
12.4 |
| 3/4”x1/8” |
35.0 |
44.0 |
51.0 |
16.8 |
8.8 |
| 3/4”x1/4” |
35.0 |
44.0 |
51.0 |
16.8 |
11.4 |
| 3/4”x3/8” |
35.0 |
44.0 |
51.0 |
16.8 |
12.4 |
| 3/4”x1/2” |
35.0 |
44.0 |
51.0 |
16.8 |
14.9 |
| 1”x1/8” |
44.0 |
57.0 |
51.0 |
19.6 |
8.8 |
| 1x1/4” |
44.0 |
57.0 |
60.0 |
19.6 |
11.4 |
| 1”x3/8” |
44.0 |
57.0 |
60.0 |
19.6 |
12.4 |
| 1”x1/2” |
44.0 |
57.0 |
60.0 |
19.6 |
14.9 |
| 1”x3/4” |
44.0 |
57.0 |
60.0 |
19.6 |
16.8 |
| 1-1/4”x1/8” |
57.0 |
64.0 |
67.0 |
21.9 |
8.8 |
| 1-1/4”x1/4” |
57.0 |
64.0 |
67.0 |
21.9 |
11.4 |
| 1-1/4”x3/8” |
57.0 |
64.0 |
67.0 |
21.9 |
12.4 |
| 1-1/4”x1/2” |
57.0 |
64.0 |
67.0 |
21.9 |
14.9 |
| 1-1/4”x3/4” |
57.0 |
64.0 |
67.0 |
21.9 |
16.8 |
| 1-1/4”x1” |
57.0 |
64.0 |
67.0 |
21.9 |
19.6 |
| 1-1/2”x1/8” |
64.0 |
76.0 |
79.0 |
22.7 |
8.8 |
| 1-1/2”x1/4” |
64.0 |
76.0 |
79.0 |
22.7 |
11.4 |
| 1-1/2”x3/8” |
64.0 |
76.0 |
79.0 |
22.7 |
12.4 |
| 1-1/2”x1/2” |
64.0 |
76.0 |
79.0 |
22.7 |
14.9 |
| 1-1/2”x3/4” |
64.0 |
76.0 |
79.0 |
22.7 |
16.8 |
| 1-1/2”x1” |
64.0 |
76.0 |
79.0 |
22.7 |
19.6 |
| 1-1/2”x1-1/4” |
64.0 |
76.0 |
79.0 |
22.7 |
21.9 |
| 2”x1/8” |
76.0 |
92.0 |
86.0 |
23.9 |
8.8 |
| 2”x1/4” |
76.0 |
92.0 |
86.0 |
23.9 |
11.4 |
| 2”x3/8” |
76.0 |
92.0 |
86.0 |
23.9 |
12.4 |
| 2”x1/2” |
76.0 |
92.0 |
86.0 |
23.9 |
14.9 |
| 2”x3/4” |
76.0 |
92.0 |
86.0 |
23.9 |
16.8 |
| 2”x1” |
76.0 |
92.0 |
86.0 |
23.9 |
19.6 |
| 2”x1-1/4” |
76.0 |
92.0 |
86.0 |
23.9 |
21.9 |
| 2”x1-1/2” |
76.0 |
92.0 |
86.0 |
23.9 |
22.7 |
| 2-1/2”x1/8” |
92.0 |
108.0 |
92.0 |
30.5 |
8.8 |
| 2-1/2”x1/4” |
92.0 |
108.0 |
92.0 |
30.5 |
11.4 |
| 2-1/2”x3/8” |
92.0 |
108.0 |
92.0 |
30.5 |
12.4 |
| 2-1/2”x1/2” |
92.0 |
108.0 |
92.0 |
30.5 |
14.9 |
| 2-1/2”x3/4” |
92.0 |
108.0 |
92.0 |
30.5 |
16.8 |
| 2-1/2”x1” |
92.0 |
108.0 |
92.0 |
30.5 |
19.6 |
| 2-1/2”x1-1/4” |
92.0 |
108.0 |
92.0 |
30.5 |
21.9 |
| 2-1/2”x1-1/2” |
92.0 |
108.0 |
92.0 |
30.5 |
22.7 |
| 2-1/2”x2” |
92.0 |
108.0 |
92.0 |
30.5 |
23.9 |
| 3”x1/8” |
108.0 |
127.0 |
108.0 |
32.8 |
8.8 |
| 3”x1/4” |
108.0 |
127.0 |
108.0 |
32.8 |
11.4 |
| 3”x3/8” |
108.0 |
127.0 |
108.0 |
32.8 |
12.4 |
| 3”x1/2” |
108.0 |
127.0 |
108.0 |
32.8 |
14.9 |
| 3”x3/4” |
108.0 |
127.0 |
108.0 |
32.8 |
16.8 |
| 3”x1” |
108.0 |
127.0 |
108.0 |
32.8 |
19.6 |
| 3”x1-1/4” |
108.0 |
127.0 |
108.0 |
32.8 |
21.9 |
| 3”x1-1/2” |
108.0 |
127.0 |
108.0 |
32.8 |
22.7 |
| 3”x2” |
108.0 |
127.0 |
108.0 |
32.8 |
23.9 |
| 3”x2-1/2” |
108.0 |
127.0 |
108.0 |
32.8 |
30.5 |
| 4”x1/8” |
140.0 |
159.0 |
121.0 |
34.6 |
8.8 |
| 4”x1/4” |
140.0 |
159.0 |
121.0 |
34.6 |
11.4 |
| 4”x3/8” |
140.0 |
159.0 |
121.0 |
34.6 |
12.4 |
| 4”x1/2” |
140.0 |
159.0 |
121.0 |
34.6 |
14.9 |
| 4”x3/4” |
140.0 |
159.0 |
121.0 |
34.6 |
16.8 |
| 4”x1” |
140.0 |
159.0 |
121.0 |
34.6 |
19.6 |
| 4”x1-1/4” |
140.0 |
159.0 |
121.0 |
34.6 |
21.9 |
| 4”x1-1/2” |
140.0 |
159.0 |
121.0 |
34.6 |
22.7 |
| 4”x2” |
140.0 |
159.0 |
121.0 |
34.6 |
23.9 |
| 4”x2-1/2” |
140.0 |
159.0 |
121.0 |
34.6 |
30.5 |
| 4”x3” |
140.0 |
159.0 |
121.0 |
34.6 |
32.8 |
ASME B16.11-2011 Threaded Couplet Weight and Dimension Chart (mm, kg)
| DN |
Nom. Pipe Size |
N |
Q |
M |
E |
Length of Thread (Min) |
| 3000Lb |
6000Lb |
B(1) |
L2(1) |
| 8 |
1/4” |
17.5 |
9.5 |
30.2 |
23.8 |
25.4 |
8.1 |
10.2 |
| 10 |
3/8” |
20.7 |
9.5 |
30.2 |
27.0 |
31.8 |
9.1 |
10.4 |
| 15 |
1/2” |
23.8 |
9.5 |
33.4 |
33.4 |
38.1 |
10.9 |
13.6 |
| 20 |
3/4” |
27.0 |
9.5 |
34.9 |
38.1 |
44.5 |
12.7 |
13.9 |
| 25 |
1” |
33.4 |
9.5 |
42.9 |
46.1 |
57.2 |
14.7 |
17.3 |
| 32 |
1-1/4” |
42.9 |
9.5 |
47.6 |
55.6 |
63.5 |
17.0 |
18.0 |
| 40 |
1-1/2” |
49.2 |
9.5 |
50.8 |
63.5 |
76.2 |
17.8 |
18.4 |
| 50 |
2” |
61.9 |
9.5 |
57.2 |
79.4 |
92.1 |
19.0 |
19.2 |
| 65 |
2-1/2” |
73.0 |
9.5 |
63.5 |
92.1 |
108.0 |
23.6 |
28.9 |
| 80 |
3” |
88.9 |
9.5 |
69.9 |
111.1 |
127.0 |
25.9 |
30.5 |
| 100 |
4” |
114.3 |
9.5 |
76.2 |
141.3 |
158.8 |
27.7 |
33.0 |
ASME B16.11-2011 Threaded Cap Weight and Dimension Chart (mm, kg)
| DN |
Nom. Pipe Size |
End to End P
|
Outside Diameter D
|
End Wall Thickness G (Min) |
Length of Thread (Min) |
| 3000Lb |
6000Lb |
3000Lb |
6000Lb |
3000Lb |
6000Lb |
B(1) |
L2(1) |
| 6 |
1/8” |
19 |
- |
16 |
- |
4.8 |
- |
6.4 |
6.7 |
| 8 |
1/4” |
25 |
27 |
19 |
25 |
4.8 |
6.4 |
8.1 |
10.2 |
| 10 |
3/8” |
25 |
27 |
22 |
32 |
4.8 |
6.4 |
9.1 |
10.4 |
| 15 |
1/2” |
32 |
33 |
28 |
38 |
6.4 |
7.9 |
10.9 |
13.6 |
| 20 |
3/4” |
37 |
38 |
35 |
44 |
6.4 |
7.9 |
12.7 |
13.9 |
| 25 |
1” |
41 |
43 |
44 |
57 |
9.7 |
11.2 |
14.7 |
17.3 |
| 32 |
1-1/4” |
44 |
46 |
57 |
64 |
9.7 |
11.2 |
17.0 |
18.0 |
| 40 |
1-1/2” |
44 |
48 |
64 |
76 |
11.2 |
12.7 |
17.8 |
18.4 |
| 50 |
2” |
48 |
51 |
76 |
92 |
12.7 |
15.7 |
19.0 |
19.2 |
| 65 |
2-1/2” |
60 |
64 |
92 |
108 |
15.7 |
19.0 |
23.6 |
28.9 |
| 80 |
3” |
65 |
68 |
108 |
127 |
19.0 |
22.4 |
25.9 |
30.5 |
| 100 |
4” |
68 |
75 |
140 |
159 |
22.4 |
28.4 |
27.7 |
33.0 |
ASME B16.11-2011 Threaded Square Head Plug Weight and Dimension Chart (mm, kg)
| DN |
Nom. Pipe Size |
Length (Min) A |
Height of Square (Min) B |
"Width Flat (Min) C |
| 6 |
1/8” |
10 |
6 |
7.15 |
| 8 |
1/4” |
11 |
6 |
9.55 |
| 10 |
3/8” |
13 |
8 |
11.11 |
| 15 |
1/2” |
14 |
10 |
14.29 |
| 20 |
3/4” |
16 |
11 |
15.88 |
| 25 |
1” |
19 |
13 |
20.64 |
| 32 |
1-1/4” |
21 |
14 |
23.81 |
| 40 |
1-1/2” |
21 |
16 |
28.58 |
| 50 |
2” |
22 |
18 |
33.34 |
| 65 |
2-1/2” |
27 |
19 |
38.10 |
| 80 |
3” |
28 |
21 |
42.86 |
| 100 |
4” |
32 |
25 |
63.50 |
ASME B16.11-2011 Threaded Round Head Plug Weight and Dimension Chart (mm, kg)
| DN |
Nom. Pipe Size |
Diameter of Head (Nom.) E |
Length (Min) D |
| 6 |
1/8” |
10 |
35 |
| 8 |
1/4” |
14 |
41 |
| 10 |
3/8” |
18 |
41 |
| 15 |
1/2” |
21 |
44 |
| 20 |
3/4” |
27 |
44 |
| 25 |
1” |
33 |
51 |
| 32 |
1-1/4” |
43 |
51 |
| 40 |
1-1/2” |
48 |
51 |
| 50 |
2” |
60 |
64 |
| 65 |
2-1/2” |
73 |
70 |
| 80 |
3” |
89 |
70 |
| 100 |
4” |
114 |
76 |
ASME B16.11-2011 Threaded Hex Head Plug Weight and Dimension Chart (mm, kg)
| DN |
Nom. Pipe Size |
Length (Min) A |
Width Flat (Nom.) F |
Hex Height (Min) H |
| 6 |
1/8” |
10 |
11.11 |
6 |
| 8 |
1/4” |
11 |
15.88 |
6 |
| 10 |
3/8” |
13 |
17.46 |
8 |
| 15 |
1/2” |
14 |
22.23 |
8 |
| 20 |
3/4” |
16 |
26.99 |
10 |
| 25 |
1” |
19 |
34.93 |
10 |
| 32 |
1-1/4” |
21 |
44.45 |
14 |
| 40 |
1-1/2” |
21 |
50.80 |
16 |
| 50 |
2” |
22 |
63.50 |
18 |
| 65 |
2-1/2” |
27 |
76.20 |
19 |
| 80 |
3” |
28 |
88.90 |
21 |
| 100 |
4” |
32 |
117.48 |
25 |
ASME B16.11-2011 Threaded Bull Plug Weight and Dimension Chart (mm, kg)
| Nom. Pipe Size |
D |
B |
B1 |
T (Min) |
H |
| Sch40/STD |
Sch80/XS (3M) |
Sch160 (6M) |
XXS |
| 1/8” |
10.3 |
51 |
9.5 |
1.73 |
2.41 |
- |
- |
14 |
| 1/4” |
13.7 |
51 |
11.0 |
2.24 |
3.02 |
- |
- |
14 |
| 3/8” |
17.1 |
57 |
12.5 |
2.31 |
3.20 |
- |
- |
14 |
| 1/2” |
21.3 |
64 |
14.5 |
2.77 |
3.73 |
4.78 |
7.47 |
14 |
| 3/4” |
26.7 |
70 |
16.0 |
2.87 |
3.91 |
5.56 |
7.82 |
18 |
| 1” |
33.4 |
76 |
19.0 |
3.38 |
4.55 |
6.35 |
9.09 |
18 |
| 1-1/4” |
42.2 |
83 |
20.5 |
3.56 |
4.85 |
6.35 |
9.70 |
18 |
| 1-1/2” |
48.3 |
89 |
20.5 |
3.68 |
5.08 |
7.14 |
10.15 |
18 |
| 2” |
60.3 |
102 |
22.0 |
3.91 |
5.54 |
8.74 |
11.07 |
20 |
| 2-1/2” |
73.0 |
127 |
27.0 |
5.16 |
7.01 |
9.53 |
14.02 |
20 |
| 3” |
88.9 |
152 |
28.5 |
5.49 |
7.62 |
11.13 |
15.24 |
20 |
| 4” |
114.3 |
178 |
32.0 |
6.02 |
8.56 |
13.49 |
17.12 |
20 |
1. Wall thickness (T Min.) in accordance with ASME
B36.10M.
2. Dimensions in accordance with MSS SP-95-2006.
ASME B16.11-2011 Threaded Hex Head Bushing Weight and Dimension Chart (mm, kg)
| DN |
Nom. Pipe Size |
Length (Min) A |
Width Flat (Nom.) F |
Hex Height (Min) G |
| 8 |
1/4” |
11 |
15.88 |
3 |
| 10 |
3/8” |
13 |
17.46 |
4 |
| 15 |
1/2” |
14 |
22.23 |
5 |
| 20 |
3/4” |
16 |
26.99 |
6 |
| 25 |
1” |
19 |
34.93 |
6 |
| 32 |
1-1/4” |
21 |
44.45 |
7 |
| 40 |
1-1/2” |
21 |
50.80 |
8 |
| 50 |
2” |
22 |
63.50 |
9 |
| 65 |
2-1/2” |
27 |
76.20 |
10 |
| 80 |
3” |
28 |
88.90 |
10 |
| 100 |
4” |
32 |
117.48 |
13 |
ASME B16.11-2011 Threaded Boss Weight and Dimension Chart (mm, kg)
| DN |
Nom. Pipe Size |
D |
W |
L2 (min) |
| 3000Lb |
3000Lb |
3000Lb |
3000Lb |
3000Lb |
3000Lb |
| 6 |
1/8” |
16.0 |
22.0 |
38.0 |
6.70 |
| 8 |
1/4” |
19.0 |
26.0 |
41.0 |
10.21 |
| 10 |
3/8” |
22.0 |
32.0 |
45.0 |
10.36 |
| 15 |
1/2” |
29.0 |
38.0 |
51.0 |
13.56 |
| 20 |
3/4” |
35.0 |
45.0 |
51.0 |
13.86 |
| 25 |
1” |
45.0 |
60.0 |
51.0 |
17.34 |
| 40 |
1-1/2” |
64.0 |
76.0 |
51.0 |
18.38 |
| 50 |
2” |
76.0 |
95.0 |
51.0 |
19.22 |
Dimensions in accordance with BS3799-1974.
ASME B16.11-2011 Threaded Hex Nipple Bushing Weight and Dimension Chart (mm, kg)
| Nominal Size |
A(min) |
W |
E |
b |
C(min) |
F(min) |
| DN |
Inch |
3000Lb |
6000Lb |
| 6 |
1/8” |
11 |
26 |
10 |
5 |
2 |
6 |
- |
| 8 |
1/4” |
15 |
36 |
15 |
8 |
6 |
6 |
- |
| 8x6 |
1/4”x1/8” |
15 |
31 |
15 |
5 |
2 |
6 |
10 |
| 10 |
3/8” |
18 |
40 |
16 |
11 |
8 |
8 |
- |
| 10x8 |
3/8”x1/4” |
18 |
39 |
16 |
8 |
6 |
8 |
15 |
| 15 |
1/2” |
22 |
48 |
20 |
14 |
11 |
8 |
- |
| 15x10 |
1/2”x3/8” |
22 |
44 |
20 |
11 |
8 |
8 |
16 |
| 15x8 |
1/2”x1/4” |
22 |
43 |
20 |
8 |
6 |
8 |
15 |
| 20 |
3/4” |
27 |
52 |
21 |
19 |
13 |
10 |
- |
| 20x15 |
3/4”x1/2” |
27 |
50 |
21 |
14 |
11 |
9 |
20 |
| 20x10 |
3/4”x3/8” |
27 |
46 |
21 |
11 |
8 |
9 |
16 |
| 25 |
1” |
35 |
60 |
25 |
24 |
17 |
10 |
- |
| 25x20 |
1”x3/4” |
35 |
56 |
25 |
19 |
13 |
10 |
21 |
| 25x15 |
1”x1/2” |
35 |
55 |
25 |
14 |
11 |
10 |
20 |
| 40 |
1-1/2” |
50 |
68 |
26 |
38 |
30 |
16 |
- |
| 40x25 |
1-1/2”x1” |
50 |
67 |
26 |
24 |
17 |
16 |
25 |
| 40x20 |
1-1/2”x3/4” |
50 |
63 |
26 |
19 |
13 |
16 |
21 |
| 40x15 |
1-1/2”x1/2” |
50 |
62 |
26 |
14 |
11 |
16 |
20 |
| 50 |
2” |
62 |
71 |
27 |
49 |
39 |
17 |
- |
| 50x40 |
2”x1-1/2” |
62 |
70 |
27 |
38 |
30 |
17 |
26 |
| 50x25 |
2”x1” |
62 |
70 |
27 |
24 |
17 |
18 |
25 |
| 50x20 |
2”x3/4” |
62 |
65 |
27 |
19 |
13 |
17 |
21 |
| 50x15 |
2”x1/2” |
62 |
65 |
27 |
14 |
11 |
18 |
20 |
Dimensions in accordance with BS3799-1974.
ASTM A733-2016 Threaded Pipe Nipple Bushing Weight and Dimension Chart (mm, kg)
| Nom. Pipe Size |
L |
Plain End Weight (kg/m) |
| Close Nipple |
Short Nipple |
Long Nipple |
Sch40/ST D |
Sch80/XS |
Sch160 |
XXS |
| 1/8” |
3/4” |
1-1/2” |
2”~12” |
0.37 |
0.47 |
- |
- |
| 1/4” |
7/8” |
1-1/2” |
2”~12” |
0.63 |
0.8 |
- |
- |
| 3/8” |
1” |
1-1/2” |
2”~12” |
0.84 |
1.1 |
- |
- |
| 1/2” |
1-1/8” |
1-1/2” |
2”~12” |
1.27 |
1.62 |
1.95 |
2.55 |
| 3/4” |
1-3/8” |
2” |
2-1/2”~12” |
1.69 |
2.2 |
2.9 |
3.64 |
| 1” |
1-1/2” |
2” |
2-1/2”~12” |
2.5 |
3.24 |
4.24 |
5.45 |
| 1-1/4” |
1-5/8” |
2-1/2” |
3”~12” |
3.39 |
4.47 |
5.61 |
7.77 |
| 1-1/2” |
1-3/4” |
2-1/2” |
3”~12” |
4.05 |
5.41 |
7.25 |
9.55 |
| 2” |
2” |
2-1/2” |
3”~12” |
5.44 |
7.48 |
11.11 |
13.44 |
| 2-1/2” |
2-1/2” |
3” |
3-1/2”~12” |
8.63 |
11.41 |
14.92 |
20.39 |
| 3” |
2-5/8” |
3” |
3-1/2”~12” |
11.29 |
15.27 |
21.35 |
27.68 |
| 3-1/2” |
2-3/4” |
4” |
4-1/2”~12” |
13.57 |
18.64 |
- |
- |
| 4” |
2-7/8” |
4” |
4-1/2”~12” |
16.08 |
22.32 |
33.54 |
41.03 |
| 5” |
3” |
4-1/2” |
5”~12” |
21.77 |
30.97 |
49.12 |
57.43 |
| 6” |
3-1/8” |
4-1/2” |
5”~12” |
28.26 |
42.56 |
67.57 |
79.22 |
Weld bevel in accordance with ASME B16.25.
ASME B16.11-2011 Threaded Union (3000Lb) Weight and Dimension Chart (mm, kg)
| Nom. Pipe Size |
Pipe End (Min) A |
Wall (Min) C |
Water Way Bore D(1) |
Male Flange (Min) F |
Nut (Min) G |
Threads Per 25.4mmH |
Bearing (Min) J |
Length Assem. Nom. L |
Clear Assem. Nut N |
| 1/8” |
14.7 |
2.41 |
"8.43
6.43" |
3.18 |
3.18 |
16 |
1.24 |
41.4 |
50.8 |
| 1/4” |
19.0 |
3.02 |
"11.13
9.45" |
3.18 |
3.18 |
16 |
1.24 |
41.4 |
50.8 |
| 3/8” |
22.9 |
3.20 |
"14.27
13.51" |
3.43 |
3.43 |
14 |
1.37 |
46.0 |
55.9 |
| 1/2” |
27.7 |
3.73 |
"17.86
17.07" |
3.68 |
3.68 |
14 |
1.50 |
49.0 |
58.4 |
| 3/4” |
33.5 |
3.91 |
"23.01
21.39" |
4.06 |
4.06 |
11 |
1.68 |
56.9 |
66.0 |
| 1” |
41.4 |
4.55 |
"28.98
27.74" |
4.57 |
4.45 |
11 |
1.85 |
62.0 |
78.7 |
| 1-1/4” |
50.5 |
4.85 |
"37.69
35.36" |
5.33 |
5.21 |
11 |
2.13 |
71.1 |
94.0 |
| 1-1/2” |
57.2 |
5.08 |
"43.54
41.20" |
5.84 |
5.59 |
10 |
2.31 |
76.5 |
111.8 |
| 2” |
70.1 |
5.54 |
"55.58
52.12" |
6.60 |
6.35 |
10 |
2.69 |
86.1 |
132.1 |
| 2-1/2” |
85.3 |
7.01 |
"66.27
64.31" |
7.49 |
7.11 |
8 |
3.07 |
102.4 |
149.9 |
| 3” |
102.4 |
7.62 |
"88.25
77.27" |
8.26 |
8.00 |
8 |
3.53 |
109.0 |
175.3 |
Dimensions in accordance with MSS SP-83-2014.
ASME B16.11-2011 Threaded Union (6000Lb) Weight and Dimension Chart (mm, kg)
| Nom. Pipe Size |
Pipe End (Min) A |
Wall (Min) C |
Water Way Bore D(1) |
Male Flange (Min) F |
Nut (Min) G |
Threads Per 25.4mmH |
Bearing (Min) J |
Length Assem. Nom. L |
Clear Assem. Nut N |
| 1/8” |
16.5 |
3.15 |
"8.43
3.20" |
3.18 |
3.18 |
16 |
1.24 |
41.4 |
50.8 |
| 1/4” |
21.1 |
3.68 |
"11.13
5.59" |
3.43 |
3.43 |
14 |
1.37 |
46.0 |
55.9 |
| 3/8” |
25.1 |
4.01 |
"14.27
8.36" |
3.68 |
3.68 |
14 |
1.50 |
49.0 |
58.4 |
| 1/2” |
31.0 |
4.78 |
"17.86
11.02" |
4.06 |
4.06 |
11 |
1.68 |
56.9 |
66.0 |
| 3/4” |
37.8 |
5.56 |
"23.01
14.78" |
4.57 |
4.45 |
11 |
1.85 |
62.0 |
78.7 |
| 1” |
46.2 |
6.35 |
"28.98
19.94" |
5.33 |
5.21 |
10 |
2.13 |
71.1 |
94.0 |
| 1-1/4” |
54.9 |
6.35 |
"37.69
28.70" |
5.84 |
5.59 |
10 |
2.31 |
76.5 |
111.8 |
| 1-1/2” |
62.5 |
7.14 |
"43.54
33.22" |
6.60 |
6.35 |
10 |
2.69 |
86.1 |
132.1 |
| 2” |
77.7 |
8.74 |
"55.58 |
| 42.09" |
7.49 |
7.11 |
8 |
3.07 |
102.4 |
149.9 |
| 2-1/2” |
92.2 |
9.53 |
"66.27
53.21" |
8.26 |
8.00 |
8 |
3.53 |
109.0 |
175.3 |
| 3” |
111.3 |
11.13 |
"82.55
65.89" |
10.19 |
10.19 |
8 |
4.06 |
158 (2) |
200.7 |
1. This length 158mm is by our standard and the length
as per MSS SP-83-2014 is 190.5mm.
2. Dimensions in accordance with MSS SP-83-2014.
ASME B16.11-2011 Threaded Adapter (3000Lb) Weight and Dimension Chart (mm, kg)
| DN |
Nom Pipe Size |
D |
L |
Threaded Size B |
| 8 |
1/4” |
19 |
33 |
1/8” |
| 10 |
3/8” |
22 |
35 |
1/4” |
| 15 |
1/2” |
28 |
42 |
3/8” |
| 20 |
3/4” |
35 |
47 |
1/2” |
| 25 |
1” |
44 |
55 |
3/4” |
| 32 |
1-1/4” |
57 |
63 |
1” |
| 40 |
1-1/2” |
64 |
66 |
1-1/4” |
| 50 |
2” |
76 |
76 |
1-1/2” |
| 65 |
2-1/2” |
92 |
90 |
2” |
| 80 |
3” |
108 |
110 |
2-1/2” |
| 100 |
4” |
140 |
120 |
3” |
ASME B16.11-2011 Threaded 90° Elbow Outlet Weight and Dimension Chart (mm, kg)
| Outlet Pipe |
A |
C |
F |
| DN |
Inch |
3000Lb |
6000Lb |
3000Lb |
6000Lb |
3000Lb |
6000Lb |
| 8 |
1/4” |
40.5 |
40.5 |
35.2 |
34.9 |
22.0 |
26.0 |
| 10 |
3/8” |
40.5 |
40.5 |
35.2 |
34.9 |
25.9 |
33.0 |
| 15 |
1/2” |
40.5 |
47.6 |
35.2 |
34.9 |
31.4 |
38.0 |
| 20 |
3/4” |
47.6 |
55.6 |
43.6 |
43.6 |
37.1 |
44.0 |
| 25 |
1” |
55.6 |
60.3 |
54.0 |
54.0 |
45.5 |
57.0 |
| 32 |
1-1/4” |
60.3 |
66.7 |
67.5 |
67.5 |
57.0 |
64.0 |
| 40 |
1-1/2” |
66.7 |
85.7 |
76.2 |
76.2 |
64.0 |
76.0 |
| 50 |
2” |
81.0 |
- |
104.8 |
- |
76.0 |
- |
| 65 |
2-1/2” |
82.6 |
- |
106.4 |
- |
92.0 |
- |
| 80 |
3” |
96.8 |
- |
125.4 |
- |
109.2 |
- |
| 100 |
4” |
114.3 |
- |
163.5 |
- |
140.0 |
- |
ASME B16.11-2011 Socket Weld 90° Elbow Weight and Dimension Chart (mm, kg)
| DN |
Nom Pipe Size |
A |
B |
D |
C (1) |
G(min) |
J(min) |
| 3M |
6M |
9M |
3M |
6M |
9M |
3M |
6M |
9M |
3M |
6M |
9M |
| Avg |
Min |
Avg |
Min |
Avg |
Min |
| 6 |
1/8” |
11.0 |
11.0 |
- |
10.8 |
6.9 |
4.0 |
- |
3.18 |
3.18 |
3.96 |
3.43 |
- |
- |
2.41 |
3.15 |
- |
9.5 |
| 8 |
1/4” |
11.0 |
13.5 |
- |
14.2 |
9.3 |
6.4 |
- |
3.78 |
3.30 |
4.60 |
4.01 |
- |
- |
3.02 |
3.68 |
- |
9.5 |
| 10 |
3/8” |
13.5 |
15.5 |
- |
17.6 |
12.6 |
9.2 |
- |
4.01 |
3.50 |
5.03 |
4.37 |
- |
- |
3.20 |
4.01 |
- |
9.5 |
| 15 |
1/2” |
15.5 |
19.0 |
25.5 |
21.8 |
15.8 |
11.8 |
6.4 |
4.67 |
4.09 |
5.97 |
5.18 |
9.35 |
8.18 |
3.73 |
4.78 |
7.47 |
9.5 |
| 20 |
3/4” |
19.0 |
22.5 |
28.5 |
27.2 |
21.0 |
15.6 |
11.1 |
4.90 |
4.27 |
6.96 |
6.04 |
9.78 |
8.56 |
3.91 |
5.56 |
7.82 |
12.5 |
| 25 |
1” |
22.5 |
27.0 |
32.0 |
33.9 |
26.7 |
20.7 |
15.2 |
5.69 |
4.98 |
7.92 |
6.93 |
11.38 |
9.96 |
4.55 |
6.35 |
9.09 |
12.5 |
| 32 |
1-1/4” |
27.0 |
32.0 |
35.0 |
42.7 |
35.1 |
29.5 |
22.8 |
6.07 |
5.28 |
7.92 |
6.93 |
12.14 |
10.62 |
4.85 |
6.35 |
9.70 |
12.5 |
| 40 |
1-1/2” |
32.0 |
38.0 |
38.0 |
48.8 |
40.9 |
34.0 |
28.0 |
6.35 |
5.54 |
8.92 |
7.80 |
12.70 |
11.12 |
5.08 |
7.14 |
10.15 |
12.5 |
| 50 |
2” |
38.0 |
41.0 |
54.0 |
61.2 |
52.5 |
42.9 |
38.2 |
6.93 |
6.04 |
10.92 |
9.50 |
13.84 |
12.12 |
5.54 |
8.74 |
11.07 |
16.0 |
| 65 |
2-1/2” |
41.0 |
- |
- |
73.9 |
62.7 |
- |
- |
8.76 |
7.67 |
- |
- |
- |
- |
7.01 |
- |
- |
16.0 |
| 80 |
3” |
57.0 |
- |
- |
89.8 |
78.0 |
- |
- |
9.52 |
8.30 |
- |
- |
- |
- |
7.62 |
- |
- |
16.0 |
| 100 |
4” |
66.5 |
- |
- |
115.2 |
102.3 |
- |
- |
10.69 |
9.35 |
- |
- |
- |
- |
8.56 |
- |
- |
19.0 |
ASME B16.11-2011 Socket Weld 45° Elbow Weight and Dimension Chart (mm, kg)
| DN |
Nom Pipe Size |
A |
B |
D |
C (1) |
G(min) |
J(min) |
| 3M |
6M |
9M |
3M |
6M |
9M |
3M |
6M |
9M |
3M |
6M |
9M |
| Avg |
Min |
Avg |
Min |
Avg |
Min |
| 6 |
1/8” |
11.0 |
11.0 |
- |
10.8 |
6.9 |
4.0 |
- |
3.18 |
3.18 |
3.96 |
3.43 |
- |
- |
2.41 |
3.15 |
- |
9.5 |
| 8 |
1/4” |
11.0 |
13.5 |
- |
14.2 |
9.3 |
6.4 |
- |
3.78 |
3.30 |
4.60 |
4.01 |
- |
- |
3.02 |
3.68 |
- |
9.5 |
| 10 |
3/8” |
13.5 |
15.5 |
- |
17.6 |
12.6 |
9.2 |
- |
4.01 |
3.50 |
5.03 |
4.37 |
- |
- |
3.20 |
4.01 |
- |
9.5 |
| 15 |
1/2” |
15.5 |
19.0 |
25.5 |
21.8 |
15.8 |
11.8 |
6.4 |
4.67 |
4.09 |
5.97 |
5.18 |
9.35 |
8.18 |
3.73 |
4.78 |
7.47 |
9.5 |
| 20 |
3/4” |
19.0 |
22.5 |
28.5 |
27.2 |
21.0 |
15.6 |
11.1 |
4.90 |
4.27 |
6.96 |
6.04 |
9.78 |
8.56 |
3.91 |
5.56 |
7.82 |
12.5 |
| 25 |
1” |
22.5 |
27.0 |
32.0 |
33.9 |
26.7 |
20.7 |
15.2 |
5.69 |
4.98 |
7.92 |
6.93 |
11.38 |
9.96 |
4.55 |
6.35 |
9.09 |
12.5 |
| 32 |
1-1/4” |
27.0 |
32.0 |
35.0 |
42.7 |
35.1 |
29.5 |
22.8 |
6.07 |
5.28 |
7.92 |
6.93 |
12.14 |
10.62 |
4.85 |
6.35 |
9.70 |
12.5 |
| 40 |
1-1/2” |
32.0 |
38.0 |
38.0 |
48.8 |
40.9 |
34.0 |
28.0 |
6.35 |
5.54 |
8.92 |
7.80 |
12.70 |
11.12 |
5.08 |
7.14 |
10.15 |
12.5 |
| 50 |
2” |
38.0 |
41.0 |
54.0 |
61.2 |
52.5 |
42.9 |
38.2 |
6.93 |
6.04 |
10.92 |
9.50 |
13.84 |
12.12 |
5.54 |
8.74 |
11.07 |
16.0 |
| 65 |
2-1/2” |
41.0 |
- |
- |
73.9 |
62.7 |
- |
- |
8.76 |
7.67 |
- |
- |
- |
- |
7.01 |
- |
- |
16.0 |
| 80 |
3” |
57.0 |
- |
- |
89.8 |
78.0 |
- |
- |
9.52 |
8.30 |
- |
- |
- |
- |
7.62 |
- |
- |
16.0 |
| 100 |
4” |
66.5 |
- |
- |
115.2 |
102.3 |
- |
- |
10.69 |
9.35 |
- |
- |
- |
- |
8.56 |
- |
- |
19.0 |
ASME B16.11-2011 Socket Weld Tee Weight and Dimension Chart (mm, kg)
| DN |
Nom Pipe Size |
A |
B |
D |
C (1) |
G(min) |
J(min) |
| 3M |
6M |
9M |
3M |
6M |
9M |
3M |
6M |
9M |
3M |
6M |
9M |
| Avg |
Min |
Avg |
Min |
Avg |
Min |
| 6 |
1/8” |
11.0 |
11.0 |
- |
10.8 |
6.9 |
4.0 |
- |
3.18 |
3.18 |
3.96 |
3.43 |
- |
- |
2.41 |
3.15 |
- |
9.5 |
| 8 |
1/4” |
11.0 |
13.5 |
- |
14.2 |
9.3 |
6.4 |
- |
3.78 |
3.30 |
4.60 |
4.01 |
- |
- |
3.02 |
3.68 |
- |
9.5 |
| 10 |
3/8” |
13.5 |
15.5 |
- |
17.6 |
12.6 |
9.2 |
- |
4.01 |
3.50 |
5.03 |
4.37 |
- |
- |
3.20 |
4.01 |
- |
9.5 |
| 15 |
1/2” |
15.5 |
19.0 |
25.5 |
21.8 |
15.8 |
11.8 |
6.4 |
4.67 |
4.09 |
5.97 |
5.18 |
9.35 |
8.18 |
3.73 |
4.78 |
7.47 |
9.5 |
| 20 |
3/4” |
19.0 |
22.5 |
28.5 |
27.2 |
21.0 |
15.6 |
11.1 |
4.90 |
4.27 |
6.96 |
6.04 |
9.78 |
8.56 |
3.91 |
5.56 |
7.82 |
12.5 |
| 25 |
1” |
22.5 |
27.0 |
32.0 |
33.9 |
26.7 |
20.7 |
15.2 |
5.69 |
4.98 |
7.92 |
6.93 |
11.38 |
9.96 |
4.55 |
6.35 |
9.09 |
12.5 |
| 32 |
1-1/4” |
27.0 |
32.0 |
35.0 |
42.7 |
35.1 |
29.5 |
22.8 |
6.07 |
5.28 |
7.92 |
6.93 |
12.14 |
10.62 |
4.85 |
6.35 |
9.70 |
12.5 |
| 40 |
1-1/2” |
32.0 |
38.0 |
38.0 |
48.8 |
40.9 |
34.0 |
28.0 |
6.35 |
5.54 |
8.92 |
7.80 |
12.70 |
11.12 |
5.08 |
7.14 |
10.15 |
12.5 |
| 50 |
2” |
38.0 |
41.0 |
54.0 |
61.2 |
52.5 |
42.9 |
38.2 |
6.93 |
6.04 |
10.92 |
9.50 |
13.84 |
12.12 |
5.54 |
8.74 |
11.07 |
16.0 |
| 65 |
2-1/2” |
41.0 |
- |
- |
73.9 |
62.7 |
- |
- |
8.76 |
7.67 |
- |
- |
- |
- |
7.01 |
- |
- |
16.0 |
| 80 |
3” |
57.0 |
- |
- |
89.8 |
78.0 |
- |
- |
9.52 |
8.30 |
- |
- |
- |
- |
7.62 |
- |
- |
16.0 |
| 100 |
4” |
66.5 |
- |
- |
115.2 |
102.3 |
- |
- |
10.69 |
9.35 |
- |
- |
- |
- |
8.56 |
- |
- |
19.0 |
ASME B16.11-2011 Socket Weld 45° Lateral Tee Weight and Dimension Chart (mm, kg)
| DN |
Nom. Pipe Size |
B |
C(1) |
D(1) |
A |
E |
G(1) (Min) |
J(1) (Min) |
| 3M |
3M |
3M |
6M |
3M |
6M |
3M |
6M |
3M |
6M |
| Avg |
Min |
Avg |
Min |
| 15 |
1/2” |
21.8 |
4.67 |
5.97 |
4.09 |
5.18 |
15.8 |
11.8 |
35 |
41 |
9 |
9 |
3.75 |
4.78 |
9.5 |
| 20 |
3/4” |
27.2 |
4.90 |
6.96 |
4.27 |
6.04 |
21.0 |
15.6 |
41 |
51 |
9 |
12 |
3.95 |
5.56 |
12.5 |
| 25 |
1” |
33.9 |
5.69 |
7.92 |
4.98 |
6.93 |
26.7 |
20.7 |
51 |
59 |
12 |
17 |
4.55 |
6.35 |
12.5 |
| 32 |
1-1/4” |
42.7 |
6.07 |
7.92 |
5.28 |
6.93 |
35.1 |
29.5 |
59 |
68 |
17 |
21 |
4.85 |
6.35 |
12.5 |
| 40 |
1-1/2” |
48.8 |
6.35 |
8.92 |
5.54 |
7.80 |
40.9 |
34.0 |
68 |
95 |
21 |
24 |
5.10 |
7.14 |
12.5 |
| 50 |
2” |
61.2 |
6.93 |
10.92 |
6.04 |
9.50 |
52.5 |
42.9 |
95 |
106 |
24 |
31 |
5.55 |
8.74 |
16.0 |
| 65 |
2-1/2” |
73.9 |
8.76 |
- |
7.67 |
- |
62.7 |
- |
118 |
- |
38 |
- |
7.05 |
- |
16.0 |
ASME B16.11-2011 Socket Weld Cross Weight and Dimension Chart (mm, kg)
| DN |
Nom Pipe Size |
A |
B |
D |
C (1) |
G(min) |
J(min) |
| 3M |
6M |
9M |
3M |
6M |
9M |
3M |
6M |
9M |
3M |
6M |
9M |
| Avg |
Min |
Avg |
Min |
Avg |
Min |
| 6 |
1/8” |
11.0 |
11.0 |
- |
10.8 |
6.9 |
4.0 |
- |
3.18 |
3.18 |
3.96 |
3.43 |
- |
- |
2.41 |
3.15 |
- |
9.5 |
| 8 |
1/4” |
11.0 |
13.5 |
- |
14.2 |
9.3 |
6.4 |
- |
3.78 |
3.30 |
4.60 |
4.01 |
- |
- |
3.02 |
3.68 |
- |
9.5 |
| 10 |
3/8” |
13.5 |
15.5 |
- |
17.6 |
12.6 |
9.2 |
- |
4.01 |
3.50 |
5.03 |
4.37 |
- |
- |
3.20 |
4.01 |
- |
9.5 |
| 15 |
1/2” |
15.5 |
19.0 |
25.5 |
21.8 |
15.8 |
11.8 |
6.4 |
4.67 |
4.09 |
5.97 |
5.18 |
9.35 |
8.18 |
3.73 |
4.78 |
7.47 |
9.5 |
| 20 |
3/4” |
19.0 |
22.5 |
28.5 |
27.2 |
21.0 |
15.6 |
11.1 |
4.90 |
4.27 |
6.96 |
6.04 |
9.78 |
8.56 |
3.91 |
5.56 |
7.82 |
12.5 |
| 25 |
1” |
22.5 |
27.0 |
32.0 |
33.9 |
26.7 |
20.7 |
15.2 |
5.69 |
4.98 |
7.92 |
6.93 |
11.38 |
9.96 |
4.55 |
6.35 |
9.09 |
12.5 |
| 32 |
1-1/4” |
27.0 |
32.0 |
35.0 |
42.7 |
35.1 |
29.5 |
22.8 |
6.07 |
5.28 |
7.92 |
6.93 |
12.14 |
10.62 |
4.85 |
6.35 |
9.70 |
12.5 |
| 40 |
1-1/2” |
32.0 |
38.0 |
38.0 |
48.8 |
40.9 |
34.0 |
28.0 |
6.35 |
5.54 |
8.92 |
7.80 |
12.70 |
11.12 |
5.08 |
7.14 |
10.15 |
12.5 |
| 50 |
2” |
38.0 |
41.0 |
54.0 |
61.2 |
52.5 |
42.9 |
38.2 |
6.93 |
6.04 |
10.92 |
9.50 |
13.84 |
12.12 |
5.54 |
8.74 |
11.07 |
16.0 |
| 65 |
2-1/2” |
41.0 |
- |
- |
73.9 |
62.7 |
- |
- |
8.76 |
7.67 |
- |
- |
- |
- |
7.01 |
- |
- |
16.0 |
| 80 |
3” |
57.0 |
- |
- |
89.8 |
78.0 |
- |
- |
9.52 |
8.30 |
- |
- |
- |
- |
7.62 |
- |
- |
16.0 |
| 100 |
4” |
66.5 |
- |
- |
115.2 |
102.3 |
- |
- |
10.69 |
9.35 |
- |
- |
- |
- |
8.56 |
- |
- |
19.0 |
ASME B16.11-2011 Socket Weld Full Coupling Weight and Dimension Chart (mm, kg)
| DN |
Nom. Pipe Size |
Socket Bore Dia. B |
Bore Dia. Of Fitting D |
Socket Wall Thickness C1 |
Laying Length E |
Depth of Socket (Min) J |
| 3M |
6M |
9M |
| 3M |
6M |
9M |
Avg |
Min |
Avg |
Min |
Avg |
Min |
| 6 |
1/8” |
10.8 |
6.9 |
4.0 |
- |
3.18 |
3.18 |
3.96 |
3.43 |
- |
- |
6.5 |
9.5 |
| 8 |
1/4” |
14.2 |
9.3 |
6.4 |
- |
3.78 |
3.30 |
4.60 |
4.01 |
- |
- |
6.5 |
9.5 |
| 10 |
3/8” |
17.6 |
12.6 |
9.2 |
- |
4.01 |
3.50 |
5.03 |
4.37 |
- |
- |
6.5 |
9.5 |
| 15 |
1/2” |
21.8 |
15.8 |
11.8 |
6.4 |
4.67 |
4.09 |
5.97 |
5.18 |
9.35 |
8.18 |
9.5 |
9.5 |
| 20 |
3/4” |
27.2 |
21.0 |
15.6 |
11.1 |
4.90 |
4.27 |
6.96 |
6.04 |
9.78 |
8.56 |
9.5 |
12.5 |
| 25 |
1” |
33.9 |
26.7 |
20.7 |
15.2 |
5.69 |
4.98 |
7.92 |
6.93 |
11.38 |
9.96 |
12.5 |
12.5 |
| 32 |
1-1/4” |
42.7 |
35.1 |
29.5 |
22.8 |
6.07 |
5.28 |
7.92 |
6.93 |
12.14 |
10.62 |
12.5 |
12.5 |
| 40 |
1-1/2” |
48.8 |
40.9 |
34.0 |
28.0 |
6.35 |
5.54 |
8.92 |
7.80 |
12.70 |
11.12 |
12.5 |
12.5 |
| 50 |
2” |
61.2 |
52.5 |
42.9 |
38.2 |
6.93 |
6.04 |
10.92 |
9.50 |
13.84 |
12.12 |
19.0 |
16.0 |
| 65 |
2-1/2” |
73.9 |
62.7 |
- |
- |
8.76 |
7.67 |
- |
- |
- |
- |
19.0 |
16.0 |
| 80 |
3” |
89.8 |
78.0 |
- |
- |
9.52 |
8.30 |
- |
- |
- |
- |
19.0 |
16.0 |
| 100 |
4” |
115.2 |
102.3 |
- |
- |
10.69 |
9.35 |
- |
- |
- |
- |
19.0 |
19.0 |
ASME B16.11-2011 Socket Weld Half Coupling Weight and Dimension Chart (mm, kg)
| DN |
Nom. Pipe Size |
Socket Bore Dia. B |
Bore Dia. Of Fitting D |
Socket Wall Thickness C1 |
Laying Length E |
Depth of Socket (Min) J |
| 3M |
6M |
9M |
| 3M |
6M |
9M |
Avg |
Min |
Avg |
Min |
Avg |
Min |
| 6 |
1/8” |
10.8 |
6.9 |
4.0 |
- |
3.18 |
3.18 |
3.96 |
3.43 |
- |
- |
16.0 |
9.5 |
| 8 |
1/4” |
14.2 |
9.3 |
6.4 |
- |
3.78 |
3.30 |
4.60 |
4.01 |
- |
- |
16.0 |
9.5 |
| 10 |
3/8” |
17.6 |
12.6 |
9.2 |
- |
4.01 |
3.50 |
5.03 |
4.37 |
- |
- |
17.5 |
9.5 |
| 15 |
1/2” |
21.8 |
15.8 |
11.8 |
6.4 |
4.67 |
4.09 |
5.97 |
5.18 |
9.35 |
8.18 |
22.5 |
9.5 |
| 20 |
3/4” |
27.2 |
21.0 |
15.6 |
11.1 |
4.90 |
4.27 |
6.96 |
6.04 |
9.78 |
8.56 |
24.0 |
12.5 |
| 25 |
1” |
33.9 |
26.7 |
20.7 |
15.2 |
5.69 |
4.98 |
7.92 |
6.93 |
11.38 |
9.96 |
28.5 |
12.5 |
| 32 |
1-1/4” |
42.7 |
35.1 |
29.5 |
22.8 |
6.07 |
5.28 |
7.92 |
6.93 |
12.14 |
10.62 |
30.0 |
12.5 |
| 40 |
1-1/2” |
48.8 |
40.9 |
34.0 |
28.0 |
6.35 |
5.54 |
8.92 |
7.80 |
12.70 |
11.12 |
32.0 |
12.5 |
| 50 |
2” |
61.2 |
52.5 |
42.9 |
38.2 |
6.93 |
6.04 |
10.92 |
9.50 |
13.84 |
12.12 |
41.0 |
16.0 |
| 65 |
2-1/2” |
73.9 |
62.7 |
- |
- |
8.76 |
7.67 |
- |
- |
- |
- |
43.0 |
16.0 |
| 80 |
3” |
89.8 |
78.0 |
- |
- |
9.52 |
8.30 |
- |
- |
- |
- |
44.5 |
16.0 |
| 100 |
4” |
115.2 |
102.3 |
- |
- |
10.69 |
9.35 |
- |
- |
- |
- |
48.0 |
19.0 |
ASME B16.11-2011 Socket Weld Reducing Coupling Weight and Dimension Chart (mm, kg)
| Nom. Pipe Size |
H |
B1 |
B2 |
D |
J |
L |
| 3M |
6M |
3M |
6M |
3M |
6M |
3M |
6M |
| 1/4”x1/8” |
22.2 |
23.8 |
14.3 |
10.9 |
6.9 |
4.0 |
10.5 |
10.5 |
27.5 |
27.5 |
| 3/8”x1/8” |
26.1 |
28.1 |
17.7 |
10.9 |
6.9 |
4.0 |
10.5 |
10.5 |
28.5 |
28.5 |
| 3/8”x1/4” |
26.1 |
28.1 |
17.7 |
14.3 |
9.3 |
6.4 |
10.5 |
10.5 |
28.5 |
28.5 |
| 1/2”x1/8” |
31.6 |
34.2 |
21.9 |
10.9 |
6.9 |
4.0 |
12.5 |
12.5 |
34.5 |
34.5 |
| 1/2”x1/4” |
31.6 |
34.2 |
21.9 |
13.3 |
9.3 |
6.4 |
12.5 |
12.5 |
34.5 |
34.5 |
| 1/2”x3/8” |
31.6 |
34.2 |
21.9 |
17.7 |
12.6 |
9.2 |
12.5 |
12.5 |
34.5 |
34.5 |
| 3/4”x1/8” |
37.4 |
41.6 |
27.3 |
10.9 |
6.9 |
4.0 |
14.0 |
14.0 |
37.5 |
37.5 |
| 3/4”x1/4” |
37.4 |
41.6 |
27.3 |
14.3 |
9.3 |
6.4 |
14.0 |
14.0 |
37.5 |
37.5 |
| 3/4”x3/8” |
37.4 |
41.6 |
27.3 |
17.7 |
12.6 |
9.2 |
14.0 |
14.0 |
37.5 |
37.5 |
| 3/4”x1/2” |
37.4 |
41.6 |
27.3 |
21.9 |
15.8 |
11.8 |
14.0 |
14.0 |
37.5 |
37.5 |
| 1”x1/8” |
45.7 |
50.2 |
34.0 |
10.9 |
6.9 |
4.0 |
15.0 |
15.0 |
43.0 |
43.0 |
| 1x1/4” |
45.7 |
50.2 |
34.0 |
14.3 |
9.3 |
6.4 |
15.0 |
15.0 |
43.0 |
43.0 |
| 1”x3/8” |
45.7 |
50.2 |
34.0 |
17.7 |
12.6 |
9.2 |
15.0 |
15.0 |
43.0 |
43.0 |
| 1”x1/2” |
45.7 |
50.2 |
34.0 |
21.9 |
15.8 |
11.8 |
15.0 |
15.0 |
43.0 |
43.0 |
| 1”x3/4” |
45.7 |
50.2 |
34.0 |
27.3 |
21.0 |
15.6 |
15.0 |
15.0 |
43.0 |
43.0 |
| 1-1/4”x1/8” |
55.3 |
59.0 |
42.8 |
10.9 |
6.9 |
4.0 |
17.0 |
17.0 |
47.0 |
47.0 |
| 1-1/4”x1/4” |
55.3 |
59.0 |
42.8 |
14.3 |
9.3 |
6.4 |
17.0 |
17.0 |
47.0 |
47.0 |
| 1-1/4”x3/8” |
55.3 |
59.0 |
42.8 |
17.7 |
12.6 |
9.2 |
17.0 |
17.0 |
47.0 |
47.0 |
| 1-1/4”x1/2” |
55.3 |
59.0 |
42.8 |
21.9 |
15.8 |
11.8 |
17.0 |
17.0 |
47.0 |
47.0 |
| 1-1/4”x3/4” |
55.3 |
59.0 |
42.8 |
27.3 |
21.0 |
15.6 |
17.0 |
17.0 |
47.0 |
47.0 |
| 1-1/4”x1” |
55.3 |
59.0 |
42.8 |
34.0 |
26.7 |
20.7 |
17.0 |
17.0 |
47.0 |
47.0 |
| 1-1/2”x1/8” |
62.5 |
67.1 |
48.9 |
10.9 |
6.9 |
4.0 |
17.5 |
17.5 |
48.0 |
48.0 |
| 1-1/2”x1/4” |
62.5 |
67.1 |
48.9 |
14.3 |
9.3 |
6.4 |
17.5 |
17.5 |
48.0 |
48.0 |
| 1-1/2”x3/8” |
62.5 |
67.1 |
48.9 |
17.7 |
12.6 |
9.2 |
17.5 |
17.5 |
48.0 |
48.0 |
| 1-1/2”x1/2” |
62.5 |
67.1 |
48.9 |
21.9 |
15.8 |
11.8 |
17.5 |
17.5 |
48.0 |
48.0 |
| 1-1/2”x3/4” |
62.5 |
67.1 |
48.9 |
27.3 |
21.0 |
15.6 |
17.5 |
17.5 |
48.0 |
48.0 |
| 1-1/2”x1” |
62.5 |
67.1 |
48.9 |
34.0 |
26.7 |
20.7 |
17.5 |
17.5 |
48.0 |
48.0 |
| 1-1/2”x1-1/4” |
62.5 |
67.1 |
48.9 |
42.8 |
35.1 |
29.5 |
17.5 |
17.5 |
48.0 |
48.0 |
| 2”x1/8” |
75.6 |
83.6 |
61.4 |
10.9 |
6.9 |
4.0 |
22.0 |
22.0 |
63.0 |
63.0 |
| 2”x1/4” |
75.6 |
83.6 |
61.4 |
14.3 |
9.3 |
6.4 |
22.0 |
22.0 |
63.0 |
63.0 |
| 2”x3/8” |
75.6 |
83.6 |
61.4 |
17.7 |
12.6 |
9.2 |
22.0 |
22.0 |
63.0 |
63.0 |
| 2”x1/2” |
75.6 |
83.6 |
61.4 |
21.9 |
15.8 |
11.8 |
22.0 |
22.0 |
63.0 |
63.0 |
| 2”x3/4” |
75.6 |
83.6 |
61.4 |
27.3 |
21.0 |
15.6 |
22.0 |
22.0 |
63.0 |
63.0 |
| 2”x1” |
75.6 |
83.6 |
61.4 |
34.0 |
26.7 |
20.7 |
22.0 |
22.0 |
63.0 |
63.0 |
| 2”x1-1/4” |
75.6 |
83.6 |
61.4 |
42.8 |
35.1 |
29.5 |
22.0 |
22.0 |
63.0 |
63.0 |
ASME B16.11-2011 Socket Weld Reducing Coupling Weight and Dimension Chart (mm, kg)
| Nom. Pipe Size |
H |
B1 |
B2 |
D |
J |
L |
| 3M |
6M |
3M |
6M |
3M |
6M |
3M |
6M |
| 2”x1-1/2” |
75.6 |
83.6 |
61.4 |
48.9 |
40.9 |
34.0 |
22.0 |
22.0 |
63.0 |
63.0 |
| 2-1/2”x1/8” |
92.0 |
108.5 |
74.1 |
10.9 |
6.9 |
4.0 |
22.0 |
22.4 |
63.0 |
63.5 |
| 2-1/2”x1/4” |
92.0 |
108.5 |
74.1 |
14.3 |
9.3 |
6.4 |
22.0 |
22.4 |
63.0 |
63.5 |
| 2-1/2”x3/8” |
92.0 |
108.5 |
74.1 |
17.7 |
12.6 |
9.2 |
22.0 |
22.4 |
63.0 |
63.5 |
| 2-1/2”x1/2” |
92.0 |
108.5 |
74.1 |
21.9 |
15.8 |
11.8 |
22.0 |
22.4 |
63.0 |
63.5 |
| 2-1/2”x3/4” |
92.0 |
108.5 |
74.1 |
27.3 |
21.0 |
15.6 |
22.0 |
22.4 |
63.0 |
63.5 |
| 2-1/2”x1” |
92.0 |
108.5 |
74.1 |
34.0 |
26.7 |
20.7 |
22.0 |
22.4 |
63.0 |
63.5 |
| 2-1/2”x1-1/4” |
92.0 |
108.5 |
74.1 |
42.8 |
35.1 |
29.5 |
22.0 |
22.4 |
63.0 |
63.5 |
| 2-1/2”x1-1/2” |
92.0 |
108.5 |
74.1 |
48.9 |
40.9 |
34.0 |
22.0 |
22.4 |
63.0 |
63.5 |
| 2-1/2”x2” |
92.0 |
108.5 |
74.1 |
61.4 |
52.5 |
42.9 |
22.0 |
22.4 |
63.0 |
63.5 |
| 3”x1/8” |
109.4 |
127.6 |
90.0 |
10.9 |
6.9 |
4.0 |
22.0 |
25.5 |
63.0 |
70.0 |
| 3”x1/4” |
109.4 |
127.6 |
90.0 |
14.3 |
9.3 |
6.4 |
22.0 |
25.5 |
63.0 |
70.0 |
| 3”x3/8” |
109.4 |
127.6 |
90.0 |
17.7 |
12.6 |
9.2 |
22.0 |
25.5 |
63.0 |
70.0 |
| 3”x1/2” |
109.4 |
127.6 |
90.0 |
21.9 |
15.8 |
11.8 |
22.0 |
25.5 |
63.0 |
70.0 |
| 3”x3/4” |
109.4 |
127.6 |
90.0 |
27.3 |
21.0 |
15.6 |
22.0 |
25.5 |
63.0 |
70.0 |
| 3”x1” |
109.4 |
127.6 |
90.0 |
34.0 |
26.7 |
20.7 |
22.0 |
25.5 |
63.0 |
70.0 |
| 3”x1-1/4” |
109.4 |
127.6 |
90.0 |
42.8 |
35.1 |
29.5 |
22.0 |
25.5 |
63.0 |
70.0 |
| 3”x1-1/2” |
109.4 |
127.6 |
90.0 |
48.9 |
40.9 |
34.0 |
22.0 |
25.5 |
63.0 |
70.0 |
| 3”x2” |
109.4 |
127.6 |
90.0 |
61.4 |
52.5 |
42.9 |
22.0 |
25.5 |
63.0 |
70.0 |
| 3”x2-1/2” |
109.4 |
127.6 |
90.0 |
74.1 |
62.7 |
53.8 |
22.0 |
25.5 |
63.0 |
70.0 |
| 4”x1/8” |
137.1 |
159.0 |
115.4 |
10.9 |
6.9 |
4.0 |
22.0 |
28.4 |
63.0 |
76.2 |
| 4”x1/4” |
137.1 |
159.0 |
115.4 |
14.3 |
9.3 |
6.4 |
22.0 |
28.4 |
63.0 |
76.2 |
| 4”x3/8” |
137.1 |
159.0 |
115.4 |
17.7 |
12.6 |
9.2 |
22.0 |
28.4 |
63.0 |
76.2 |
| 4”x1/2” |
137.1 |
159.0 |
115.4 |
21.9 |
15.8 |
11.8 |
22.0 |
28.4 |
63.0 |
76.2 |
| 4”x3/4” |
137.1 |
159.0 |
115.4 |
27.3 |
21.0 |
15.6 |
22.0 |
28.4 |
63.0 |
76.2 |
| 4”x1” |
137.1 |
159.0 |
115.4 |
34.0 |
26.7 |
20.7 |
22.0 |
28.4 |
63.0 |
76.2 |
| 4”x1-1/4” |
137.1 |
159.0 |
115.4 |
42.8 |
35.1 |
29.5 |
22.0 |
28.4 |
63.0 |
76.2 |
| 4”x1-1/2” |
137.1 |
159.0 |
115.4 |
48.9 |
40.9 |
34.0 |
22.0 |
28.4 |
63.0 |
76.2 |
| 4”x2” |
137.1 |
159.0 |
115.4 |
61.4 |
52.5 |
42.9 |
22.0 |
28.4 |
63.0 |
76.2 |
| 4”x2-1/2” |
137.1 |
159.0 |
115.4 |
74.1 |
62.7 |
53.8 |
22.0 |
28.4 |
63.0 |
76.2 |
| 4”x3” |
137.1 |
159.0 |
115.4 |
90.0 |
78.0 |
66.5 |
22.0 |
28.4 |
63.0 |
76.2 |
ASME B16.11-2011 Socket Weld Eccentric Reducer Coupling Weight and Dimension Chart (mm, kg)
| Nom. Pipe Size |
B1 |
B2 |
D |
C(Min) |
H |
J |
L |
| 1/4”x1/8” |
14.3 |
10.9 |
6.9 |
3.80 |
22.2 |
10.5 |
27.5 |
| 3/8”x1/8” |
17.7 |
10.9 |
6.9 |
4.05 |
26.1 |
10.5 |
28.5 |
| 3/8”x1/4” |
17.7 |
14.3 |
9.3 |
4.05 |
25.1 |
10.5 |
28.5 |
| 1/2”x1/4” |
21.9 |
14.3 |
9.3 |
4.70 |
31.6 |
12.5 |
34.5 |
| 1/2”x3/8” |
21.9 |
17.7 |
12.6 |
4.70 |
31.6 |
12.5 |
34.5 |
| 3/4”x3/8” |
27.3 |
17.7 |
12.6 |
4.90 |
37.4 |
14.0 |
37.5 |
| 3/4”x1/2” |
27.3 |
21.9 |
15.8 |
4.90 |
37.4 |
14.0 |
37.5 |
| 1”x3/8” |
34.0 |
17.7 |
12.6 |
5.70 |
45.7 |
15.0 |
43.0 |
| 1”x1/2” |
34.0 |
21.9 |
15.8 |
5.70 |
45.7 |
15.0 |
43.0 |
| 1”x3/4” |
34.0 |
27.3 |
21.0 |
5.70 |
45.7 |
15.0 |
43.0 |
| 1-1/4”x1/2” |
42.8 |
21.9 |
15.8 |
6.10 |
55.3 |
17.0 |
47.0 |
| 1-1/4”x3/4” |
42.8 |
27.3 |
21.0 |
6.10 |
55.3 |
17.0 |
47.0 |
| 1-1/4”x1” |
42.8 |
34.0 |
26.7 |
6.10 |
55.3 |
17.0 |
47.0 |
| 1-1/2”x1/2” |
48.9 |
21.9 |
15.8 |
6.40 |
62.5 |
17.5 |
48.0 |
| 1-1/2”x3/4” |
48.9 |
27.3 |
21.0 |
6.40 |
62.5 |
17.5 |
48.0 |
| 1-1/2”x1” |
48.9 |
34.0 |
26.7 |
6.40 |
62.5 |
17.5 |
48.0 |
| 1-1/2”x1-1/4” |
48.9 |
42.8 |
35.1 |
6.40 |
62.5 |
17.5 |
48.0 |
| 2”x1” |
61.4 |
34.0 |
26.7 |
6.95 |
75.6 |
22.0 |
63.0 |
| 2”x1-1/4” |
61.4 |
42.8 |
35.1 |
6.95 |
75.6 |
22.0 |
63.0 |
| 2”x1-1/2” |
61.4 |
48.9 |
40.9 |
6.95 |
75.6 |
22.0 |
63.0 |
| 2-1/2”x1-1/4” |
74.1 |
42.8 |
35.1 |
8.80 |
92.0 |
22.0 |
63.0 |
| 2-1/2”x1-1/2” |
74.1 |
48.9 |
40.9 |
8.80 |
92.0 |
22.0 |
63.0 |
| 2-1/2”x2” |
74.1 |
61.4 |
52.5 |
8.80 |
92.0 |
22.0 |
63.0 |
| 3”x1-1/2” |
90.0 |
48.9 |
40.9 |
9.55 |
109.4 |
22.0 |
63.0 |
| 3”x2” |
90.0 |
61.4 |
52.5 |
9.55 |
109.4 |
22.0 |
63.0 |
| 3’x2-1/2” |
90.0 |
74.1 |
62.7 |
9.55 |
109.4 |
22.0 |
63.0 |
| 4”x2” |
115.4 |
61.4 |
52.5 |
10.70 |
137.1 |
22.0 |
63.0 |
| 4”x2-1/2” |
115.4 |
74.1 |
62.7 |
10.70 |
137.1 |
22.0 |
63.0 |
| 4”x3” |
115.4 |
90.0 |
78.0 |
10.70 |
137.1 |
22.0 |
63.0 |
ASME B16.11-2011 Socket Weld Couplet Weight and Dimension Chart (mm, kg)
| DN |
Nom. Pipe Size |
B |
C(1) |
D |
J(Min) |
N |
Q |
M |
G |
| 3M |
6M |
3M |
6M |
3M |
6M |
| Avg |
Min |
Avg |
Min |
| 8 |
1/4” |
14.2 |
3.78 |
3.30 |
4.60 |
4.01 |
9.3 |
6.4 |
9.5 |
17.5 |
9.5 |
30.2 |
23.8 |
25.4 |
| 10 |
3/8” |
17.6 |
4.01 |
3.50 |
5.03 |
4.37 |
12.6 |
9.2 |
9.5 |
20.7 |
9.5 |
30.2 |
27.0 |
31.8 |
| 15 |
1/2” |
21.8 |
4.67 |
4.09 |
5.97 |
5.18 |
15.8 |
11.8 |
9.5 |
23.8 |
9.5 |
33.4 |
33.4 |
38.1 |
| 20 |
3/4” |
27.2 |
4.90 |
4.27 |
6.96 |
6.04 |
21.0 |
15.6 |
12.5 |
27.0 |
9.5 |
34.9 |
38.1 |
44.5 |
| 25 |
1” |
33.9 |
5.69 |
4.98 |
7.92 |
6.93 |
26.7 |
20.7 |
12.5 |
33.4 |
9.5 |
42.9 |
46.1 |
57.2 |
| 32 |
1-1/4” |
42.7 |
6.07 |
5.28 |
7.92 |
6.93 |
35.1 |
29.5 |
12.5 |
42.9 |
9.5 |
47.6 |
55.6 |
63.5 |
| 40 |
1-1/2” |
48.8 |
6.35 |
5.54 |
8.92 |
7.80 |
40.9 |
34.0 |
12.5 |
49.2 |
9.5 |
50.8 |
63.5 |
76.2 |
| 50 |
2” |
61.2 |
6.93 |
6.04 |
10.92 |
9.50 |
52.5 |
42.9 |
16.0 |
61.9 |
9.5 |
57.2 |
79.4 |
92.1 |
| 65 |
2-1/2” |
73.9 |
8.76 |
7.67 |
- |
- |
62.7 |
- |
16.0 |
73.0 |
9.5 |
63.5 |
92.1 |
- |
| 80 |
3” |
89.8 |
9.52 |
8.30 |
- |
- |
78.0 |
- |
16.0 |
88.9 |
9.5 |
69.9 |
111.1 |
- |
| 100 |
4” |
115.2 |
10.69 |
9.35 |
- |
- |
102.3 |
- |
19.0 |
114.3 |
9.5 |
76.2 |
141.3 |
- |
ASME B16.11-2011 Socket Weld Cap Weight and Dimension Chart (mm, kg)
| DN |
Nom. Pipe Size |
Socket Bore Dia. |
Bore Dia. Of Fitting D |
Socket Wall Thickness C (1) |
Depth of Socket (Min) J |
End Wall Thickness (Min) K |
| 3M |
6M |
9M |
3M |
6M |
9M |
| 3M |
6M |
9M |
Avg |
Min |
Avg |
Min |
Avg |
Min |
| 6 |
1/8” |
10.8 |
6.9 |
4.0 |
- |
3.18 |
3.18 |
3.96 |
3.43 |
- |
- |
9.5 |
4.8 |
6.4 |
- |
| 8 |
1/4” |
14.2 |
9.3 |
6.4 |
- |
3.78 |
3.30 |
4.60 |
4.01 |
- |
- |
9.5 |
4.8 |
6.4 |
- |
| 10 |
3/8” |
17.6 |
12.6 |
9.2 |
- |
4.01 |
3.50 |
5.03 |
4.37 |
- |
- |
9.5 |
4.8 |
6.4 |
- |
| 15 |
1/2” |
21.8 |
15.8 |
11.8 |
6.4 |
4.67 |
4.09 |
5.97 |
5.18 |
9.35 |
8.18 |
9.5 |
6.4 |
7.9 |
11.2 |
| 20 |
3/4” |
27.2 |
21.0 |
15.6 |
11.1 |
4.90 |
4.27 |
6.96 |
6.04 |
9.78 |
8.56 |
12.5 |
6.4 |
7.9 |
12.7 |
| 25 |
1” |
33.9 |
26.7 |
20.7 |
15.2 |
5.69 |
4.98 |
7.92 |
6.93 |
11.38 |
9.96 |
12.5 |
9.6 |
11.2 |
14.2 |
| 32 |
1-1/4” |
42.7 |
35.1 |
29.5 |
22.8 |
6.07 |
5.28 |
7.92 |
6.93 |
12.14 |
10.62 |
12.5 |
9.6 |
11.2 |
14.2 |
| 40 |
1-1/2” |
48.8 |
40.9 |
34.0 |
28.0 |
6.35 |
5.54 |
8.92 |
7.80 |
12.70 |
11.12 |
12.5 |
11.2 |
12.7 |
15.7 |
| 50 |
2” |
61.2 |
52.5 |
42.9 |
38.2 |
6.93 |
6.04 |
10.92 |
9.50 |
13.84 |
12.12 |
16.0 |
12.7 |
15.7 |
19.0 |
| 65 |
2-1/2” |
73.9 |
62.7 |
- |
- |
8.76 |
7.67 |
- |
- |
- |
- |
16.0 |
15.7 |
19.0 |
- |
| 80 |
3” |
89.8 |
78.0 |
- |
- |
9.52 |
8.30 |
- |
- |
- |
- |
16.0 |
19.0 |
22.4 |
- |
| 100 |
4” |
115.2 |
102.3 |
- |
- |
10.69 |
9.35 |
- |
- |
- |
- |
19.0 |
22.4 |
28.4 |
- |
ASME B16.11-2011 Socket Weld Union(3000Lb) Weight and Dimension Chart (mm, kg)
| Nom. Pipe Size |
Pipe End (Min) A |
Socket Bore Dia. B (1) |
Socket Wall (Min) C |
Water Way Bore D (1) |
Laying Length E (1) |
Male Flange (Min) F |
Nut (Min) G |
Threads Per 25.4mm H |
Bearing (Min) J |
Depth of Socket (Min) K |
Length Assem. Nom. L |
Clear Assem. Nut N |
| 1/8” |
21.8 |
11.18 10.67 |
3.18 |
7.59 6.07 |
22.4 19.1 |
3.18 |
3.18 |
16 |
1.24 |
9.7 |
41.4 |
50.8 |
| 1/4” |
21.8 |
14.61 14.10 |
3.30 |
10.01 8.48 |
22.4 19.1 |
3.18 |
3.18 |
16 |
1.24 |
9.7 |
41.4 |
50.8 |
| 3/8” |
25.9 |
18.03 17.53 |
3.51 |
13.28 11.76 |
26.9 20.6 |
3.43 |
3.43 |
14 |
1.37 |
9.7 |
46.0 |
55.9 |
| 1/2” |
31.2 |
22.23 21.73 |
4.09 |
16.56 15.04 |
26.9 20.6 |
3.68 |
3.68 |
14 |
1.50 |
9.7 |
49.0 |
58.4 |
| 3/4” |
37.1 |
27.56 27.05 |
4.27 |
21.69 20.17 |
31.8 25.4 |
4.06 |
4.06 |
11 |
1.68 |
12.7 |
56.9 |
66.0 |
| 1” |
45.5 |
34.29 33.78 |
4.98 |
27.41 25.88 |
34.3 26.2 |
4.57 |
4.45 |
11 |
1.85 |
12.7 |
62.0 |
78.7 |
| 1-1/4” |
54.9 |
43.05 42.55 |
5.28 |
35.81 34.29 |
40.6 32.5 |
5.33 |
5.21 |
11 |
2.13 |
12.7 |
71.1 |
94.0 |
| 1-1/2” |
61.5 |
49.15 48.64 |
5.54 |
41.66 40.13 |
42.2 34.0 |
5.84 |
5.59 |
10 |
2.31 |
12.7 |
76.5 |
111.8 |
| 2” |
75.2 |
61.62 61.11 |
6.05 |
53.26 51.74 |
45.5 37.3 |
6.60 |
6.35 |
10 |
2.69 |
15.7 |
86.1 |
132.1 |
| 2-1/2” |
91.7 |
74.45 73.81 |
7.67 |
64.24 61.19 |
61.7 52.1 |
7.49 |
7.11 |
8 |
3.07 |
15.7 |
102.4 |
149.9 |
| 3” |
109.2 |
90.42 89.79 |
8.31 |
79.45 76.40 |
63.8 53.6 |
8.26 |
8.00 |
8 |
3.53 |
15.7 |
109.0 |
175.3 |
Dimensions in accordance with MSS SP-83-2014.
ASME B16.11-2011 Socket Weld Union(6000Lb) Weight and Dimension Chart (mm, kg)
| Nom. Pipe Size |
Pipe End (Min) A |
Socket Bore Dia. B (1) |
Socket Wall (Min) C |
Water Way Bore D (1) |
Laying Length E (1) |
Male Flange (Min) F |
Nut (Min) G |
Threads Per 25.4mm H |
Bearing (Min) J |
Depth of Socket (Min) K |
Length Assem. Nom. L |
Clear Assem. Nut N |
| 1/8” |
21.8 |
11.18 10.67 |
3.43 |
4.80 3.20 |
22.4 19.1 |
3.18 |
3.18 |
16 |
1.24 |
9.7 |
41.4 |
50.8 |
| 1/4” |
25.9 |
14.61 14.10 |
4.01 |
7.11 5.59 |
26.9 20.6 |
3.43 |
3.43 |
14 |
1.37 |
9.7 |
46.0 |
55.9 |
| 3/8” |
31.2 |
18.03 17.53 |
4.37 |
9.88 8.36 |
26.9 20.6 |
3.68 |
3.68 |
14 |
1.50 |
9.7 |
49.0 |
58.4 |
| 1/2” |
37.1 |
22.23 21.72 |
5.18 |
12.55 11.02 |
31.8 25.4 |
4.06 |
4.06 |
11 |
1.68 |
9.7 |
56.9 |
66.0 |
| 3/4” |
45.5 |
27.56 27.05 |
6.05 |
16.31 14.78 |
34.3 26.2 |
4.57 |
4.45 |
11 |
1.85 |
12.7 |
62.0 |
78.7 |
| 1” |
54.9 |
34.29 33.78 |
6.93 |
27.41 25.88 |
40.6 32.5 |
5.33 |
5.21 |
11 |
2.13 |
12.7 |
71.1 |
94.0 |
| 1-1/4” |
61.5 |
43.05 42.55 |
6.93 |
30.23 28.70 |
42.2 34.0 |
5.84 |
5.59 |
10 |
2.31 |
12.7 |
76.5 |
111.8 |
| 1-1/2” |
75.2 |
49.15 48.64 |
7.80 |
34.75 33.22 |
45.5 37.3 |
6.60 |
6.35 |
10 |
2.69 |
12.7 |
86.1 |
132.1 |
| 2” |
91.7 |
61.62 61.11 |
9.50 |
43.61 42.09 |
61.7 52.1 |
7.49 |
7.11 |
8 |
3.07 |
15.7 |
102.4 |
149.9 |
| 2-1/2” |
109.2 |
74.45 73.81 |
10.39 |
54.74 53.21 |
63.8 53.6 |
8.26 |
8.00 |
8 |
3.53 |
15.7 |
109.0 |
175.3 |
Dimensions in accordance with MSS SP-83-2014.
ASME B16.11-2011 Butt Weld 45° Branch Outlet Weight and Dimension Chart (mm, kg)
| Outlet Pipe |
A |
T |
F |
| DN |
Inch |
Min |
Max |
Sch 40/STD |
Sch 80/XS |
| 8 |
1/4” |
38.1 |
42.9 |
2.24 |
3.02 |
13.7 |
| 10 |
3/8” |
38.1 |
42.9 |
2.31 |
3.20 |
17.1 |
| 15 |
1/2” |
38.1 |
42.9 |
2.77 |
3.73 |
21.3 |
| 20 |
3/4” |
44.5 |
50.8 |
2.87 |
3.91 |
26.7 |
| 25 |
1” |
54.0 |
65.1 |
3.38 |
4.55 |
33.4 |
| 32 |
1-1/4” |
54.0 |
65.1 |
3.56 |
4.85 |
42.2 |
| 40 |
1-1/2” |
63.5 |
69.9 |
3.68 |
5.08 |
48.3 |
| 50 |
2” |
73.0 |
88.9 |
3.91 |
5.54 |
60.3 |
1. Wall thickness (T) in accordance with ASME B16.10M,
ASME B36.19M.
2. Dimensions in accordance with MSS SP-97-2012.
ASME B16.11-2011 Socket Weld 90° Elbow Outlet Weight and Dimension Chart (mm, kg)
| Outlet Pipe |
A |
C |
F |
D |
J |
| DN |
Inch |
3000Lb |
6000Lb |
3000Lb |
6000Lb |
3000Lb |
6000Lb |
3000Lb |
6000Lb |
| 8 |
1/4” |
40.5 |
40.5 |
35.2 |
34.9 |
22.0 |
26.0 |
14.35 |
10.0 |
10.0 |
| 10 |
3/8” |
40.5 |
40.5 |
35.2 |
34.9 |
25.9 |
33.0 |
17.80 |
10.0 |
10.0 |
| 15 |
1/2” |
40.5 |
47.6 |
35.2 |
34.9 |
31.4 |
38.0 |
21.95 |
11.1 |
10.0 |
| 20 |
3/4” |
47.6 |
55.6 |
43.6 |
43.6 |
37.1 |
44.0 |
27.30 |
12.7 |
14.3 |
| 25 |
1” |
55.6 |
60.3 |
54.0 |
54.0 |
45.5 |
57.0 |
34.05 |
13.5 |
15.9 |
| 32 |
1-1/4” |
60.3 |
66.7 |
67.5 |
67.5 |
57.0 |
64.0 |
42.80 |
15.1 |
20.6 |
| 40 |
1-1/2” |
66.7 |
85.7 |
76.2 |
76.2 |
64.0 |
76.0 |
48.90 |
15.9 |
20.6 |
| 50 |
2” |
81.0 |
- |
104.8 |
- |
76.0 |
- |
61.35 |
17.5 |
- |
| 65 |
2-1/2” |
82.6 |
- |
106.4 |
- |
92.0 |
- |
74.15 |
23.8 |
- |
| 80 |
3” |
96.8 |
- |
125.4 |
- |
109.2 |
- |
90.10 |
28.6 |
- |
| 100 |
4” |
114.3 |
- |
163.5 |
- |
140.0 |
- |
115.75 |
29.4 |
- |
ASME B16.11-2011 Butt Weld 90° Elbow Outlet Weight and Dimension Chart (mm, kg)
| Outlet Pipe |
A |
C |
F |
T |
| DN |
Inch |
Sch80 |
Sch160 |
Sch80
| Sch160 |
| 8 |
1/4” |
40.5 |
40.5 |
35.2 |
13.7 |
3.0 |
3.7 |
| 10 |
3/8” |
40.5 |
40.5 |
35.2 |
17.1 |
3.2 |
4.0 |
| 15 |
1/2” |
40.5 |
47.6 |
35.2 |
21.3 |
3.7 |
4.7 |
| 20 |
3/4” |
47.6 |
55.6 |
43.6 |
26.7 |
3.9 |
5.5 |
| 25 |
1” |
55.6 |
60.3 |
54.0 |
33.4 |
4.5 |
6.4 |
| 32 |
1-1/4” |
60.3 |
67.7 |
67.5 |
42.2 |
4.9 |
6.4 |
| 40 |
1-1/2” |
66.7 |
85.7 |
76.2 |
48.3 |
5.1 |
7.1 |
| 50 |
2” |
81.0 |
- |
104.8 |
60.3 |
5.5 |
- |
| 65 |
2-1/2” |
82.6 |
- |
106.4 |
73.0 |
7.0 |
- |
| 80 |
3” |
96.8 |
- |
125.4 |
88.9 |
7.6 |
- |
| 100 |
4” |
114.3 |
- |
163.5 |
114.3 |
8.6 |
- |
Weld bevel in accordance with ASME B16.25.
ASME B16.11-2011 Butt Weld Nipple Branch Outlet (Bevel / Plain End) Weight and Dimension Chart(mm, kg)
| Outlet Pipe |
C |
F |
| 3000LB - XS |
6000LB – S160 |
|
| 1/2” |
23.8 |
13.8 |
21.3 |
| 3/4” |
30.2 |
18.9 |
26.7 |
| 1” |
36.5 |
24.3 |
33.4 |
| 1-1/4” |
44.5 |
32.5 |
42.2 |
| 1-1/2” |
50.8 |
38.1 |
48.3 |
| 2” |
65.1 |
49.2 |
60.3 |
Weld bevel in accordance with ASME B16.25.