ANSI B16.9 Inconel ButtWeld Fittings, Dimensions Chart in mm, kg, PDF online

A buttweld fitting is a pipe fitting that is weldable that allows for change of direction of flow, to branch off, reduces pipe size or attach additional equipment. A buttweld fitting is manufactured by the process of hot or cold forming, which means that it is bended and moulded to the correct shape and form. They are also heat treated to remove residual stresses and to achieve special mechanical properties. The ends of buttweld fittings have to be bevelled and the exact shape and form of the bevel depends upon the wall thickness of the pipe it is being attached to. The material of a buttweld fitting can be any one of a number of exotic materials such as super duplex, nickel alloy or 6% molybdenum. The most of the time, the material of the fitting is the same as the pipe system that it is welded to. Inconel buttweld fittings weight and dimensions chart is given below explains all this composition.

• Inconel Buttweld Fitting: Inconel is a family of nickel-chromium-based superalloys known for their exceptional high-temperature strength and corrosion resistance. Inconel buttweld fittings are a type of pipe fittings made from Inconel alloy materials, and they are designed for use in high-temperature and corrosive environments. These alloys typically contain nickel, chromium, iron, and other elements, including molybdenum, niobium, and cobalt, depending on the specific grade. Inconel buttweld fittings typically require less maintenance due to their corrosion resistance. For detailed reference, refer to inconel weight and dimensions chart PDF given below. Inconel buttweld fittings are chosen for their exceptional performance in extreme environments, making them suitable for critical applications where high-temperature strength and corrosion resistance are essential.
  
  Features:
  1. High strength
  2. Corrosion resistance
  3. Heat resistance
  4. Long service life
  5. Versatility
  6. High-Temperature Performance
  
  Applications:
  Inconel buttweld fittings may be used widely in many industrial sectors. The industries where it is used include chemical processing, oil and gas production, power generation, aerospace, marine engineering, paper and pulp production, food Processing and even nuclear power plants. For knowing specific grades and specifications for your project applications, Inconel Buttweld Fittings Weight, Dimensions Chart given in mm, kg is necessary to go through. The wide variety of implementations shows the strength of the buttweld fitting and how often this specific type of fitting is used.

Specifications of Inconel Buttweld Fittings

The dimensional standard of the buttweld fittings we supply are in accordance with the American National Standards Institute (ANSI): ANSI B16.9, MSS SP43 and MSS SP75. All the specifications of buttweld fittings are mentioned in the Weight and Dimensions Chart PDF below.

Types of inconel buttweld fitting:

The types of inconel buttweld fitting are:

• Elbows
• Tees
• Reducers
• Cap
• Stub End

ANSI B16.9/B16.28 90°/45° Long and Short Radius Elbow Weight and Dimension Chart (mm, kg)

Nominal Pipe Size (NPS)	Outside Diameter at Bevel(OD)	Center to End
		Long Radius Elbow		Short Radius Elbow
		90 degree. A	45 degree B	90 degree A
1/2	21.3	38.1	15.7	-
3/4	26.7	38.1	19.1	-
1	33.4	38.1	22.4	25.4
1-1/4	42.2	47.8	25.4	31.8
1-1/2	48.3	57.2	28.4	38.1
2	60.3	76.2	35.1	50.8
2-1/2	73.0	95.2	44.4	63.5
3	88.9	114.3	50.8	76.2
3-1/2	101.6	133.4	57.2	88.9
4	114.3	152.4	63.5	101.6
5	141.3	190.5	79.2	127.0
6	168.3	228.6	95.2	152.4
8	219.1	304.8	127.0	203.2
10	273.1	381.0	158.8	254.0
12	323.9	457.2	190.5	304.8
14	355.6	533.4	222.2	355.6
16	406.4	609.6	254.0	406.4
18	457.2	685.8	285.8	457.2
20	508.0	762.0	317.5	508.0
22	558.8	838.2	342.9	558.8
24	609.6	914.4	381.0	609.6
26	660.4	990.6	406.4	660.4
28	711.2	1066.8	438.2	711.2
30	762.0	1143.0	469.9	762.0
32	812.8	1219.2	501.6	812.8
34	863.6	1295.4	533.4	863.6
36	914.4	1371.6	565.2	914.4
38	965.2	1447.8	599.9	-
40	1016.0	1524.0	632.0	1016.0
42	1066.8	1600.2	660.4	1066.8
44	1117.6	1676.4	695.5	1117.6
46	1168.4	1752.6	726.9	-
48	1219.2	1828.8	759.0	1219.2
52*	1320.8	-	-	1320.8
54*	1371.6	2057.4	852.2	1371.6
56*	1422.4	2133.6	883.8	1422.4
60*	1524.0	2286.0	946.9	1524.0
66*	1676.4	2514.6	1041.6	-
68*	1727.0	2591	1073	1727
72*	1829.0	2743	1137	1829
76*	1930.0	2896	1199	1930
80*	2032.0	3048	1263	2032

ANSI B16.9/B16.28 180° Long and Short Radius Elbow Weight and Dimension Chart (mm, kg)

Nominal Pipe Size (NPS)	Outside Diameter at Bevel OD	Long Radius Elbow		Short Radius Elbow
		Short Radius Elbow		Center to Center. P	Back to Face K
1/2	21.3	76.2	47.8	-	-
3/4	26.7	76.2	50.8	-	-
1	33.4	76.2	55.6	50.8	41.1
1-1/4	42.2	95.2	69.8	63.5	52.3
1-1/2	48.3	114.3	82.6	76.2	62.0
2	60.3	152.4	106.4	101.6	81.0
2-1/2	73.0	109.5	131.8	127.0	100.1
3	88.9	228.6	158.8	152.4	120.7
3-1/2	101.6	266.7	184.2	177.8	139.7
4	114.3	304.8	209.6	203.2	158.8
5	141.3	381.0	261.9	254.0	196.9
6	168.3	457.2	312.7	304.8	236.5
8	219.1	609.6	414.3	406.4	312.7
10	273.1	762.0	517.7	508.0	390.7
12	323.9	914.4	619.3	609.6	466.9
14	355.6	1066.8	711.2	711.2	533.4
16	406.4	1219.2	812.8	812.8	609.6
18	457.2	1371.6	914.4	914.4	685.8
20	508.0	1524.0	1016.0	1016.0	762.0
22	558.8	1676.4	1117.6	1117.6	838.2
24	609.6	1828.8	1219.2	1219.2	914.4

ANSI B16.9 / MSS SP-75 Equal Tee/Reducing Tee Weight and Dimension Chart (mm, kg)

Nominal Pipe Size (NPS)	Outside Diameter At Bevel D		Center to End
	Run	Outlet	Run C	Outlet (1) M
1/2 x 1/2	21.3	21.3	25.4	25.4
1/2 x 3/8		17.1		25.4
1/2 x 1/4		13.7		25.4
3/4 x 3/4	26.7	26.7	28.4	28.4
3/4 x 1/2		21.3		28.4
3/4 x 3/8		17.1		28.4
1 x 1	33.4	33.4	38.1	38.1
1 x 3/4		26.7		38.1
1 x 1/2		21.3		38.1
1-1/4 x 1-1/4	42.2	42.2	47.8	47.8
1-1/4 x 1		33.4		47.8
1-1/4 x 3/4		26.7		47.8
1-1/4 x 1/2		21.3		47.8
1-1/2 x 1-1/2	48.3	48.3	57.2	57.2
1-1/2 x 1-1/4		42.2		57.2
1-1/2 x 1		33.4		57.2
1-1/2 x 3/4		26.7		57.2
1-1/2 x 1/2		21.3		57.2
2 x 2	60.3	60.3	63.5	63.5
2 x 1-1/2		48.3		60.5
2 x 1-1/4		42.2		57.2
2 x 1		33.4		50.8
2 x 3/4		26.7		44.4
2 x 1/2*		21.3
2-1/2 x 2-1/2	73.0	73.0	76.2	76.2
2-1/2 x 2		60.3		69.8
2-1/2 x 1-1/2		48.3		66.5
2-1/2 x 1-1/4		42.2		63.5
2-1/2 x 1		33.4		57.2
3 x 3	88.9	88.9	85.9	85.9
3 x 2-1/2		73.0		82.6
3 x 2		60.3		76.2
3 x 1-1/2		48.3		73.2
3 x 1-1/4		42.2		69.8
3 x 1*		33.4
3-1/2 x 3-1/2	101.6	101.6	95.2	95.2
3-1/2 x 3		88.9		91.9
3-1/2 x 2-1/2		73.0		88.9
3-1/2 x 2		60.3		82.6
3-1/2 x 1-1/2		48.3		79.2

ANSI B16.9 / MSS SP-75 Equal Tee/Reducing Tee Weight and Dimension Chart (mm, kg)

Nominal Pipe Size (NPS)	Outside Diameter At Bevel D		Center to End
	Run	Outlet	Run C	Outlet (1) M
4 x 4	114.3	114.3	104.6	104.6
4 x 3-1/2		101.6		101.6
4 x 3		88.9		98.6
4 x 2-1/2		73.0		95.2
4 x 2		60.3		88.9
4 x 1-1/2		48.3		85.9
4 x 1-1/4		42.2
4 x 1*		33.5
5 x 5	141.3	141.3	124.0	124.0
5 x 4		114.3		117.3
5 x 3-1/2		101.6		114.3
5 x 3		88.9		111.3
5 x 2-1/2		73.0		108.0
5 x 2		60.3		104.6
5 x 1-1/2*		48.3
6 x 6	168.3	168.3	142.7	142.7
6 x 5		141.3		136.7
6 x 4		114.3		130.0
6 x 3-1/2		101.6		127.0
6 x 3		88.9		124.0
6 x 2-1/2		73.0		120.6
6 x 2*		60.3
8 x 8	19.1	219.1	177.8	177.8
8 x 6		168.3		168.1
8 x 5		141.3		162.1
8 x 4		114.3		155.4
8 x 3-1/2		101.6		152.4
8 x 3*		88.9
10 x 10	273.1	273.1	215.9	215.9
10 x 8		219.1		203.2
10 x 6		168.3		193.5
10 x 5		141.3		190.5
10 x 4		114.3		184.2
12 x 12	323.9	323.9	254.0	254.0
12 x 10		273.1		241.3
12 x 8		219.1		228.6
12 x 6		168.3		218.9
12 x 5		141.3		215.9

ANSI B16.9 / MSS SP-75 Equal Tee/Reducing Tee Weight and Dimension Chart (mm, kg)

Nominal Pipe Size (NPS)	Outside Diameter At Bevel D		Center to End
	Run	Outlet	Run C	Outlet (1) M
14 x 14	355.6	355.6	279.4	279.4
14 x 12		323.9		269.7
14 x 10		273.1		257.0
14 x 8		219.1		247.6
14 x 6		168.3		238.3
16 x 16	406.4	406.4	304.8	304.8
16 x 14		355.6		304.8
16 x 12		323.9		295.1
16 x 10		273.1		282.4
16 x 8		219.1		373.0
16 x 6		168.3		263.7
18 x 18	457.2	457.2	342.9	342.9
18 x 16		406.4		330.2
18 x 14		355.6		330.2
18 x 12		323.9		320.5
18 x 10		273.1		307.8
18 x 8		219.1		298.4
20 x 20	508.0	508.0	381.0	381.0
20 x 18		457.2		369.3
20 x 16		406.4		355.6
20 x 14		355.6		355.6
20 x 12		323.9		345.9
20 x 10		273.1		333.2
20 x 8		219.1		323.8
22 x 22	558.8	558.8	419.1	419.1
22 x 20		508.0		406.4
22 x 18		457.2		393.7
22 x 16		406.4		381.0
22 x 14		355.6		381.0
22 x 12		323.9		371.3
22 x 10		273.1		358.6
24 x 24	609.6	609.6	431.8	431.8
24 x 22		558.8		431.8
24 x 20		508.0		431.8
24 x 18		457.2		419.1
24 x 16		406.4		406.4
24 x 14		355.6		406.4
24 x 12		323.9		396.7
24 x 10		273.1		384.0
26 x 26	660.4	660.4	495.3	495.3
26 x 24		609.6		482.6

ANSI B16.9 / MSS SP-75 Equal Tee/Reducing Tee Weight and Dimension Chart (mm, kg)

Nominal Pipe Size (NPS)	Outside Diameter At Bevel D		Center to End
	Run	Outlet	Run C	Outlet (1) M
26 x 22		558.8		469.9
26 x 20		508.0		457.2
26 x 18		457.2		444.5
26 x 16		406.4		431.8
26 x 14		355.6		431.8
26 x 12		323.1		422.1
28 x 28	711.2	711.2	520.7	520.7
28 x 26		660.4		520.7
28 x 24		609.6		508.0
28 x 22		558.8		495.3
28 x 20		508.0		482.6
28 x 18		457.2		469.9
28 x 16		406.4		457.2
28 x 14		355.6		457.2
28 x 12		323.1		447.5
30 x 30	762.0	762.0	558.8	558.8
30 x 28		711.2		546.1
30 x 26		660.4		546.1
30 x 24		609.6		533.4
30 x 22		558.8		520.7
30 x 20		508.0		508.0
30 x 18		457.2		495.3
30 x 16		406.4		482.6
30 x 14		355.6		482.6
30 x 12		323.9		472.6
30 x 10		273.1		460.2
32 x 32	812.8	812.8	596.9	596.9
32 x 30		762.0		584.2
32 x 28		711.2		571.5
32 x 26		660.4		571.5
32 x 24		609.6		558.8
32 x 22		558.8		546.1
32 x 20		508.0		533.4
32 x 18		457.2		520.7
32 x 16		406.4		508.0
32 x 14		355.6		508.0
34 x 34	863.6	863.6	635.0	635.0
34 x 32		812.8		622.3
34 x 30		762.0		609.6
34 x 28		711.2		596.9
34 x 26		660.4		596.9

ANSI B16.9 / MSS SP-75 Equal Tee/Reducing Tee Weight and Dimension Chart (mm, kg)

Nominal Pipe Size (NPS)	Outside Diameter At Bevel D		Center to End
	Run	Outlet	Run C	Outlet (1) M
34 x 24		609.6		584.2
34 x 22		558.8		571.5
34 x 20		508.0		558.8
34 x 18		457.2		546.1
34 x 16		406.4		533.4
36 x 36	914.4	914.4	673.1	673.1
36 x 34		863.6		660.4
36 x 32		812.8		647.7
36 x 30		762.0		635.0
36 x 28		711.2		622.3
36 x 26		660.4		622.3
36 x 24		609.6		609.6
36 x 22		558.8		596.9
36 x 20		508.0		584.2
36 x 18		457.2		571.5
36 x 16		406.4		558.8
38 x 38	965.2	965.2	711.2	711.2
38 x 36		914.4		711.2
38 x 34		863.6		698.5
38 x 32		812.8		685.8
38 x 30		762.0		673.1
38 x 28		711.2		647.7
38 x 26		660.4		647.7
38 x 24		609.6		635.0
38 x 22		558.8		622.3
38 x 20		508.0		609.6
38 x 18		457.2		596.9
40 x 40	1016.0	1016.0	749.3	749.3
40 x 38		965.2		749.3
40 x 36		914.4		736.6
40 x 34		863.6		723.9
40 x 32		812.8		711.2
40 x 30		762.0		698.5
40 x 28		711.2		673.1
40 x 26		660.4		673.1
40 x 24		609.6		660.4
40 x 22		558.8		647.7
40 x 20		508.0		635.0
40 x 18		457.2		622.3
42 x 42	1066.8	1066.8	762.0	711.2
42 x 40		1016.0		711.2

ANSI B16.9 / MSS SP-75 Equal Tee/Reducing Tee Weight and Dimension Chart (mm, kg)

Nominal Pipe Size (NPS)	Outside Diameter At Bevel D		Center to End
	Run	Outlet	Run C	Outlet (1) M
42 x 38		965.2		711.2
42 x 36		914.4		711.2
42 x 34		863.6		711.2
42 x 32		812.8		711.2
42 x 30		762.0		711.2
42 x 28	1066.8	711.2	762.0	698.5
42 x 26		660.4		698.5
42 x 24		609.6		660.4
42 x 22		558.8		660.4
42 x 20		508.0		660.4
42 x 18		457.2		647.7
42 x 16		406.4		635.0
44 x 44	1117.6	1117.6	812.8	762.0
44 x 42		1066.8		762.0
44 x 40		1016.0		749.3
44 x 38		965.2		736.6
44 x 36		914.4		723.9
44 x 34		863.6		723.9
44 x 32		812.8		711.2
44 x 30		762.0		711.2
44 x 28		711.2		698.5
44 x 26		660.4		698.5
44 x 24		609.6		698.5
44 x 22		558.8		685.8
44 x 20		508.0		685.8
46 x 46	1168.4	1168.4	850.9	800.1
46 x 44		1117.6		800.1
46 x 42		1066.8		787.4
46 x 40		1016.0		774.7
46 x 38		965.2		762.0
46 x 36		914.4		762.0
46 x 34		863.6		749.3
46 x 32		812.8		749.3
46 x 30		762.0		736.6
46 x 28		711.2		736.6
46 x 26		660.4		736.6
46 x 24		609.6		723.9
46 x 20*		508.0		723.9
48 x 48	1219.2	1219.2	889.0	838.2
48 x 46		1168.4		838.2
48 x 44		1117.6		838.2
48 x 42		1066.8		812.8
48 x 40		1016.0		812.8
48 x 38		965.2		812.8
48 x 36		914.4		787.4
48 x 34		863.6		787.4
48 x 32	1219.2	812.8	889.0	787.4
48 x 44		1117.6		838.2
48 x 42		1066.8		812.8
48 x 40		1016.0		812.8
48 x 38		965.2		812.8
48 x 36		914.4		787.4
48 x 34		863.6		787.4
48 x 32		812.8		787.4
48 x 30		762.0		762.0
48 x 28		711.2		762.0
48 x 26		660.4		762.0
48 x 24		609.6		736.6
48 x 22		558.8		736.6
52 x 52*	1320.8	1320.8	965.2	914.4
52 x 48*		1219.2		863.6
52 x 44*		1117.6		812.8
52 x 40*		1016.0		762.0
54 x 54*	1371.6	1371.6	1003.3	952.5
54 x 52*		1320.8		914.4
54 x 48*		1219.2		863.6
54 x 44*		1117.6		863.6
54 x 40*		1016.0		812.8
54 x 28*		711.2		787.4
54 x 20*		508.0		787.4
56 x 56*	1422.4	1422.4	1041.4	965.2
56 x 52*		1320.8		914.4
56 x 48*		1219.2		863.6
56 x 44*		1117.6		812.8
56 x 40*		1016.0		812.8
56 x 28*		711.2		812.8
56 x 20*		508.0		812.8
60 x 60*	1524.0	1524.0	1117.6	1016.0
60 x 56*		1422.4		965.2
60 x 52*		1320.8		914.4
60 x 48*		1219.2		863.6
60 x 40*		1016.0		863.6
60 x 28*		711.2		863.6
60 x 20*		508.0		863.6
64 x 64*	1626.0	1626.0	1194.0	1092.0
64 x 60*		1524.0		1067.0
64 x 56*		1422.0		1016.0
64 x 52*		1321.0		965.0
64 x 48*		1219.0		914
66 x 66*	1676.4	1676.4	1219.2	1066.8
68 x 68*	1727.0	1727.0	1270.0	1168.0
68 x 64*		1626.0		1143.0
68 x 60*		1524.0		1118.0
68 x 56*		1422.0		1067.0
68 x 52*		1321.0		1016.0
68 x 48*		1219.0		965.0
72 x 72*	1829.0	1829.0	1320.0	1245.0
72 x 68*		1727.0		1219.0
72 x 64*		1626.0		1194.0
72 x 60*		1524.0		1168.0
72 x 56*	1829.0	1422.0	1320.0	1118.0
72 x 52*		1321.0		1067.0
72 x 48*		1219.0		1016.0
76 x 76*	1930.0	1930.0	1422.0	1320.0
76 x 72*		1829.0		1295.0
76 x 68*		1727.0		1270.0
76 x 64*		1626.0		1245.0
76 x 60*		1524.0		1219.0
76 x 56*		1422.0		1168.0
76 x 52*		1321.0		1118.0
76 x 48*		1219.0		1067.0
80 x 80*	2032.0	2032.0	1499.0	1397.0
80 x 76*		1930.0		1372.0
80 x 72*		1829.0		1346.0
80 x 68*		1727.0		1321.0
80 x 64*		1626.0		1295.0
80 x 60*		1524.0		1270.0
80 x 56*		1422.0		1219.0
80 x 52*		1321.0		1168.0
80 x 48*		1219.0		1118.0

ANSI B16.9 / MSS SP-75 Cap Weight and Dimension Chart (mm, kg)

Nominal Pipe Size (NPS)	Outside Diameter at Bevel D	Center to End E
1/2	21.3	25.4
3/4	26.7	25.4
1	33.4	38.1
1-1/4	42.2	38.1
1-1/2	48.3	38.1
2	60.3	38.1
2-1/2	73.0	38.1
3	88.9	50.8
3-1/2	101.6	63.5
4	114.3	63.5
5	141.3	76.2
6	168.3	88.9
8	219.1	101.6
10	273.1	127.0
12	323.9	152.4
14	355.6	165.1
16	406.4	177.8
18	457.2	203.2
20	508.0	228.6
22	558.8	254.0
24	609.6	266.7
26	660.4	266.7
28	711.2	266.7
30	762.0	266.7
32	812.8	266.7
34	863.6	266.7
36	914.4	266.7
38	965.2	304.8
40	1016.0	304.8
42	1066.8	304.8
44	1117.6	342.9
46	1168.4	342.9
48	1219.2	342.9

ANSI B36.19M Wall Thickness Schedule Dimension Chart (mm, kg)

Nominal Pipe Size		Outside Diameter		Nominal Wall Thickness
A	B	JIS	ANSI	Sch 5S	Sch 10S	Sch 20S	GS	Sch 10	LG (7.9)	Sch 20	Sch 30	STD	Sch 40	Sch 60	XS	Sch 80	Sch 100	Sch 120	Sch 140	Sch 160	XXS
8	1/4	13.8	13.7	1.2	1.65	2.0	2.3	-	-	-	-	(2.2)	2.2	2.4	(3.0)	3.0	-	-	-	-	-
10	3/8	17.3	17.1	1.2	1.65	2.0	2.3	-	-	-	-	(2.3)	2.3	2.8	(3.2)	3.2	-	-	-	-	-
15	1/2	21.7	21.3	1.65	2.1	2.5	2.8	-	-	-	-	(2.8)	2.8	3.2	(3.7)	3.7	-	-	-	4.7	7.5
20	3/4	27.2	26.7	1.65	2.1	2.5	2.8	-	-	-	-	(2.9)	2.9	3.4	(3.9)	3.9	-	-	-	5.5	7.8
25	1	34.0	33.4	1.65	2.8	3.0	3.2	-	-	-	-	(3.4)	3.4	3.9	(4.5)	4.5	-	-	-	6.4	9.1
32	1-1/4	42.7	42.2	1.65	2.8	3.0	3.5	-	-	-	-	(3.6)	3.6	4.5	(4.9)	4.9	-	-	-	6.4	9.7
40	1-1/2	48.6	48.3	1.65	2.8	3.0	3.5	-	-	-	-	(3.7)	3.7	4.5	(5.1)	5.1	-	-	-	7.1	10.2
50	2	60.5	60.3	1.65	2.8	3.5	3.8	-	-	-	-	(3.9)	3.9	4.9	(5.5)	5.5	-	-	-	8.7	11.1
65	2-1/2	76.3	73.0	2.1	3.0	3.5	4.2	-	-	-	-	(5.2)	5.2	6.0	(7.0)	7.0	-	-	-	9.5	14.0
80	3	89.1	88.9	2.1	3.0	4.0	4.2	-	-	-	-	(5.5)	5.5	6.6	(7.6)	7.6	-	-	-	11.1	15.2
90	3-1/2	101.6	101.6	2.1	3.0	4.0	4.2	-	-	-	-	(5.7)	5.7	7.0	(8.1)	8.1	-	-	-	12.7	-
100	4	114.3	114.3	2.1	3.0	4.0	4.5	-	-	-	-	(6.0)	6.0	7.1	(8.6)	8.6	-	11.1	-	13.5	17.1
125	5	139.8	141.3	2.8	3.4	5.0	4.5	-	-	-	-	(6.6)	6.6	8.1	(9.5)	9.5	-	12.7	-	15.9	19.0
150	6	165.2	168.3	2.8	3.4	5.0	5.0	-	5.0**	-	-	(7.1)	7.1	9.3	(11.0)	11.0	-	14.3	-	18.2	21.9
175	7	190.7	-	-	-	-	5.3	-	-	-	-	-	-	-	-	-	-	-	-	-	-
200	8	216.3	219.1	2.8	3.8	6.5	5.8	-	5.8**	6.4	7.0	(8.2)	8.2	10.3	(12.7)	12.7	15.1	18.2	20.6	23.0	22.2
225	9	241.8	-	-	-	-	6.2	-	-	-	-	-	-	-	-	-	-	-	-	-	-
250	10	267.4	273.1	3.4	4.2	6.5	6.6	-	6.6**	6.4	7.8	(9.3)	9.3	12.7	12.7	15.1	18.3	21.4	25.4	28.6	25.4
300	12	318.5	323.9	4.0	4.6	6.5	6.9	-	6.9**	6.4	8.4	9.5	10.3	14.3	12.7	17.4	21.4	25.4	28.6	33.3	25.4
350	14	355.6	355.6	4.0	4.8	7.9	7.9	6.4	7.9	7.9	9.5	9.5	11.1	15.1	12.7	19.0	23.8	27.8	31.8	35.7	-
400	16	406.4	406.4	4.2	4.8	7.9	7.9	6.4	7.9	7.9	9.5	9.5	12.7	16.7	12.7	21.4	26.2	30.9	36.5	40.5	-
450	18	457.2	457.2	4.2	4.8	7.9	7.9	6.4	7.9	7.9	11.1	9.5	14.3	19.0	12.7	23.8	29.4	34.9	39.7	45.2	-
500	20	508.0	508.0	4.8	5.5	7.9	7.9	6.4	7.9	9.5	12.7	9.5	15.1	20.6	12.7	26.2	32.5	38.1	44.4	50.0	-
550	22	558.8	558.8	4.8	5.5	-	-	6.4	7.9	9.5	12.7	9.5	-	22.2	12.7	28.6	34.9	41.3	47.6	54.0	-
600	24	609.6	609.6	5.5	6.4	-	-	6.4	7.9	9.5	14.3	9.5	17.5	24.6	12.7	31.0	38.9	46.0	52.4	59.5	-
650	26	660.4	660.4	-	-	-	-	7.9	7.9	12.7	-	9.5	-	-	12.7	-	-	-	-	-	-
700	28	711.2	711.2	-	-	-	-	7.9	7.9	12.7	15.9	9.5	-	-	12.7	-	-	-	-	-	-
750	30	762.0	762.0	6.4	7.9	-	-	7.9	7.9	12.7	15.9	9.5	-	-	12.7	-	-	-	-	-	-
800	32	812.8	812.8	-	-	-	-	7.9	7.9	12.7	15.9	9.5	17.5	-	12.7	-	-	-	-	-	-
850	34	863.6	863.6	-	-	-	-	7.9	7.9	12.7	15.9	9.5	17.5	-	12.7	-	-	-	-	-	-
900	36	914.4	914.4	-	-	-	-	7.9	7.9	12.7	15.9	9.5	19.1	-	12.7	-	-	-	-	-	-
950	38	965.2	965.2	-	-	-	-	-	7.9	12.7	-	9.5	-	-	12.7	-	-	-	-	-	-
1000	40	1016.0	1016.0	-	-	-	-	-	7.9	-	-	9.5	-	-	12.7	-	-	-	-	-	-
1050	42	1066.8	1066.8	-	-	-	-	-	7.9	-	-	9.5	-	-	12.7	-	-	-	-	-	-
1100	44	1117.6	1117.6	-	-	-	-	-	7.9	-	-	9.5	-	-	12.7	-	-	-	-	-	-
1150	46	1168.4	1168.4	-	-	-	-	-	7.9	-	-	9.5	-	-	12.7	-	-	-	-	-	-
1200	48	1219.2	1219.2	-	-	-	-	-	7.9	-	-	9.5	-	-	12.7	-	-	-	-	-	-
1250	50	1270.0	1270.0	-	-	-	-	-	7.9	-	-	9.5	-	-	12.7	-	-	-	-	-	-
1300	52	1320.8	1320.8	-	-	-	-	-	7.9	-	-	9.5	-	-	12.7	-	-	-	-	-	-
1350	54	1371.6	1371.6	-	-	-	-	-	7.9	-	-	9.5	-	-	12.7	-	-	-	-	-	-
1400	56	1422.4	1422.4	-	-	-	-	-	7.9	-	-	9.5	-	-	12.7	-	-	-	-	-	-
1450	58	1473.2	1473.2	-	-	-	-	-	7.9	-	-	9.5	-	-	12.7	-	-	-	-	-	-
1500	60	1524.0	1524.0	-	-	-	-	-	7.9	-	-	9.5	-	-	12.7	-	-	-	-	-	-
1600	64	1626.0
1700	68	1727.0
1800	72	1829.0
1900	76	1932.0
2000	80	2032.0

Dimensions in accordance with JIS G3448, JIS G3455, JIS G3454, JIS G3459, ANSI B36.10M