ANSI B16.5 Hastelloy Flanges Weight, Dimensions Chart in mm, kg, PDF online

Hastelloy flanges are pipe flanges that are made from hastelloy, a nickel-chromium superalloy. This superalloy has is known for their excellent resistance to corrosion, high-temperature performance, and superior mechanical properties. This gives hastelloy a blend of the desirable properties of both nickel and chromium. Hastelloy flanges are important parts used in piping systems to connect pipes, valves, and equipment while providing easy access for maintenance and inspection. Hastelloy flanges are made from several alloys like Hastelloy C-276, Hastelloy C-22, Hastelloy B-2, and others. Hastelloy flanges weight and dimensions chart PDF gives more information about the composition.

Some of the advantages of using hastelloy flanges are high strength, excellent corrosion resistance, strength and toughness, versatility and weldability. Hastelloy flanges are used in a large variety of applications, including oil and gas, chemical processing, marine, power generation, pulp and paper, food and beverage and pharmaceuticals. Hastelloy flanges come in all sorts of sizes and configurations, including raised face flanges, flat face flanges, and ring type joint flanges. These sizes and configurations are discussed further in weight and dimensions chart PDF in mm and kg units. This chart is available below. It is important to note that hastelloy alloys come in different grades, each with its own set of properties and usefulness for specific applications. The selection of hastelloy grade depends on the corrosive environment, temperature, pressure, and other factors involved in the application.

Hastelloy Flanges Types

• 1. HASTELLOY SLIP-ON FLANGES - The bore size of the hastelloy slip-on flange as a standard is slightly larger than the outside diameter of the connecting pipe, as the pipe has to slide inside the flange then needs to be connected by the execution of the fillet weld around the border. Hastelloy slip-on flanges weight and dimensions chart gives detailed data about these flanges.
• 2. HASTELLOY WELD NECK FLANGES - Hastelloy weld neck flanges are helpful in high/low-temperature applications and high-pressures that require an unlimited fluid flow conveyed by the piping system. These butt-weld end connection flanges are most usual in industrial applications to ensure a high strength connection between assemblies. Hastelloy weld neck flanges weight and dimensions chart gives detailed data about these flanges.
• 3. HASTELLOY BLIND FLANGES - Most piping systems require regular audit and blind/blank flanges are most usual inspection point. This hastelloy blind flanges, when selected according to the suitable pressure class, can easily handle the tension caused by the liquid’s operating pressure and pressure flowing through the pipe. They are useful to ‘blank off’ valves, pipelines, etc. in almost all applications. Hastelloy blind flanges weight and dimensions chart gives detailed data about these flanges.
• 4. HASTELLOY THREADED FLANGES - You can build the hastelloy threaded flanges without welding, and hence it is easy to remove. You do not have to use it for usages where bending stresses involve high pressure or temperatures. A seal weld is useful in combination with times. Hastelloy threaded flanges weight and dimensions chart gives detailed data about these flanges.
• 5. HASTELLOY LAP JOINT FLANGES - Lap joint flanges is a type of slip-on flange but made for connecting to a stub end for rotation. Lap joints are helpful to keep carbon/low alloy steel pipes with additional mechanical properties. Hastelloy lap joint flanges are similar to slip-on flanges but are characterized by the radius-rounded interior edge of the flange face and generally come with a taller hub. Hastelloy lap joint flanges weight and dimensions chart gives detailed data about these flanges.
• 6. HASTELLOY SOCKET-WELD FLANGES - Smaller diameter socket weld and counter bore flanges handle the applications with high pressures like steam lines but with restricted spacing. You must ensure toughness possess internal welds—the bore of the pipe and flange match provides a good flow connection. Hastelloy socket-weld flanges weight and dimensions chart gives detailed data about these flanges.

Hastelloy Flanges Specifications

Hastelloy flanges specifications are accessible in numerous grades. Hastelloy flanges are manufactured in accordance with a variety of standards, including ASTM A182, ASTM A815, ANSI/ASME B16.5, DIN 55014 and BS EN 1092-1, with pressure ratings from Class 150, 300, 600, 2500 and beyond. Hastelloy flanges are available in a wide range of sizes to accommodate different pipe diameters and system requirements. Refer to weight and dimensions chart PDF given in mm and kg, for knowing more in details about hastelloy flanges sizes and specifications.

ANSI B16.5 Class 150 Flanges Weight and Dimension Chart (mm, kg)

Nominal Pipe Size (inches)	Class 150
	Diameter of Flange (inches)	No. of Bolts	Diameter of Bolts (inches)	Diameter of Bolt Holes (inches)	Bolt Circle (inches)
1/4	3-3/8	4	1/2	0.62	2-1/4
1/2	3-1/2	4	1/2	0.62	2-3/8
3/4	3-7/8	4	1/2	0.62	2-3/4
1	4-1/4	4	1/2	0.62	3-1/8
1-1/4	4-5/8	4	1/2	0.62	3-1/2
1-1/2	5	4	1/2	0.62	3-7/8
2	6	4	5/8	0.75	4-3/4
2-1/2	7	4	5/8	0.75	5-1/2
3	7-1/2	4	5/8	0.75	6
3-1/2	8-1/2	8	5/8	0.75	7
4	9	8	5/8	0.75	7-1/2
5	10	8	3/4	0.88	8-1/2
6	11	8	3/4	0.88	9-1/2
8	13-1/2	8	3/4	0.88	11-3/4
10	16	12	7/8	1	14-1/4
12	19	12	7/8	1	17
14	21	12	1	1.12	18-3/4
16	23-1/2	16	1	1.12	21-1/4
18	25	16	1-1/8	1.25	22-3/4
20	27-1/2	20	1-1/8	1.25	25
24	32	20	1-1/4	1.38	29-1/2

ANSI B16.5 Class 300 Flanges Weight and Dimension Chart (mm, kg)

Nominal Pipe Size NPS (inches)	Class 300
	Diameter of Flange (inches)	No. of Bolts	Diameter of Bolts (inches)	Diameter of Bolt Holes (inches)	Bolt Circle (inches)
1/4	3-3/8	4	1/2	0.62	2-1/4
1/2	3-3/4	4	1/2	0.62	2-5/8
3/4	4-5/8	4	5/8	0.75	3-1/4
1	4-7/8	4	5/8	0.75	3-1/2
1-1/4	5-1/4	4	5/8	0.75	3-7/8
1-1/2	6-1/8	4	3/4	0.88	4-1/2
2	6-1/2	8	5/8	0.75	5
2-1/2	7-1/2	8	3/4	0.88	5-7/8
3	8-1/4	8	3/4	0.88	6-5/8
3-1/2	9	8	3/4	0.88	7-1/4
4	10	8	3/4	0.88	7-7/8
5	11	8	3/4	0.88	9-1/4
6	12-1/2	12	3/4	0.88	10-5/8
8	15	12	7/8	1	13
10	17-1/2	16	1	1.12	15-1/4
12	20-1/2	16	1-1/8	1.25	17-3/4
14	23	20	1-1/8	1.25	20-1/4
16	25-1/2	20	1-1/4	1.38	22-1/2
18	28	24	1-1/4	1.38	24-3/4
20	30-1/2	24	1-1/4	1.38	27
24	36	24	1-1/2	1.62	32

ANSI B16.5 Class 400 Flanges Weight and Dimension Chart (mm, kg)

Nominal Pipe Size NPS (inches)	Class 400
	Diameter of Flange (inches)	No. of Bolts	Diameter of Bolts (inches)	Diameter of Bolt Holes (inches)	Bolt Circle (inches)
1/4	3-3/8	4	1/2	0.62	2-1/4
1/2	3-3/4	4	1/2	0.62	2-5/8
3/4	4-5/8	4	5/8	0.75	3-1/4
1	4-7/8	4	5/8	0.75	3-1/2
1-1/4	5-1/4	4	5/8	0.75	3-7/8
1-1/2	6-1/8	4	3/4	0.88	4-1/2
2	6-1/2	8	5/8	0.75	5
2-1/2	7-1/2	8	3/4	0.88	5-7/8
3	8-1/4	8	3/4	0.88	6-5/8
3-1/2	9	8	7/8	1	7-1/4
4	10	8	7/8	1	7-7/8
5	11	8	7/8	1	9-1/4
6	12-1/2	12	7/8	1	10-5/8
8	15	12	1	1.12	13
10	17-1/2	16	1-1/8	1.25	15-1/4
12	20-1/2	16	1-1/4	1.38	17-3/4
14	23	20	1-1/4	1.38	20-1/4
16	25-1/2	20	1-3/8	1.5	22-1/2
18	28	24	1-3/8	1.5	24-3/4
20	30-1/2	24	1-1/2	1.62	27
24	36	24	1-3/4	1.88	32

ANSI B16.5 Class 600 Flanges Weight and Dimension Chart (mm, kg)

Nominal Pipe Size NPS (inches)	Class 600
	Diameter of Flange (inches)	No. of Bolts	Diameter of Bolts (inches)	Diameter of Bolt Holes (inches)	Bolt Circle (inches)
1/4	3-3/8	4	1/2	0.62	2-1/4
1/2	3-3/4	4	1/2	0.62	2-5/8
3/4	4-5/8	4	5/8	0.75	3-1/4
1	4-7/8	4	5/8	0.75	3-1/2
1-1/4	5-1/4	4	5/8	0.75	3-7/8
1-1/2	6-1/8	4	3/4	0.88	4-1/2
2	6-1/2	8	5/8	0.75	5
2-1/2	7-1/2	8	3/4	0.88	5-7/8
3	8-1/4	8	3/4	0.88	6-5/8
3-1/2	9	8	7/8	1	7-1/4
4	10-3/4	8	7/8	1	8-1/2
5	13	8	1	1.12	10-1/2
6	14	12	1	1.12	11-1/2
8	16-1/2	12	1-1/8	1.25	13-3/4
10	20	16	1-1/4	1.38	17
12	22	20	1-1/4	1.38	19-1/4
14	23-3/4	20	1-3/8	1.5	20-3/4
16	27	20	1-1/2	1.62	23-3/4
18	29-1/4	20	1-5/8	1.75	25-3/4
20	32	24	1-5/8	1.75	28-1/2
24	37	24	1-7/8	2	33

ANSI B16.5 Class 900 Flanges Weight and Dimension Chart (mm, kg)

Nominal Pipe Size NPS (inches)	Class 900
	Diameter of Flange (inches)	No. of Bolts	Diameter of Bolts (inches)	Diameter of Bolt Holes (inches)	Bolt Circle (inches)
1/2	4-3/4	4	3/4	0.88	3-1/4
3/4	5-1/8	4	3/4	0.88	3-1/2
1	5-7/8	4	7/8	1	4
1-1/4	6-1/4	4	7/8	1	4-3/8
1-1/2	7	4	1	1.12	4-7/8
2	8-1/2	8	7/8	1	6-1/2
2-1/2	9-5/8	8	1	1.12	7-1/2
3	9-1/2	8	7/8	1	7-1/2
4	11-1/2	8	1-1/8	1.25	9-1/4
5	13-3/4	8	1-1/4	1.38	11
6	15	12	1-1/8	1.25	12-1/2
8	18-1/2	12	1-3/8	1.5	15-1/2
10	21-1/2	16	1-3/8	1.5	18-1/2
12	24	20	1-3/8	1.5	21
14	25-1/4	20	1-1/2	1.62	22
16	27-3/4	20	1-5/8	1.75	24-1/2
18	31	20	1-7/8	2	27
20	33-3/4	20	2	2.12	29-1/2
24	41	20	2-1/2	2.62	35-1/2

ANSI B16.5 Class 2500 Flanges Weight and Dimension Chart (mm, kg)

Nominal Pipe Size NPS (inches)	Class 2500
	Diameter of Flange (inches)	No. of Bolts	Diameter of Bolts (inches)	Diameter of Bolt Holes (inches)	Bolt Circle (inches)
1/2	5-1/4	4	3/4	0.88	3-1/2
3/4	5-1/2	4	3/4	0.88	3-3/4
1	6-1/4	4	7/8	1	4-1/4
1-1/4	7-1/4	4	1	1.12	5-1/8
1-1/2	8	4	1-1/8	1.25	5-3/4
2	9-1/4	8	1	1.12	6-3/4
2-1/2	10-1/2	8	1-1/8	1.25	7-3/4
3	12	8	1-1/4	1.38	9
4	14	8	1-1/2	1.62	10-3/4
5	16-1/2	8	1-3/4	1.88	12-3/4
6	19	8	2	2.12	14-1/2
8	21-3/4	12	2	2.12	17-1/4
10	26-1/2	12	2-1/2	2.62	21-1/4
12	30	12	2-3/4	2.88	24-3/8