ANSI B16.5 Brass Flanges Weight, Dimensions Chart in mm, kg, PDF online

Brass flanges are pipe flanges that are made from brass, an alloy of copper and zinc, which offers several advantageous properties for such applications. Brass is chosen for its corrosion resistance, durability, and good thermal conductivity. This gives brass flanges a blend of the desirable properties of both copper and zinc. Brass flanges are a type of connecting component used in various piping and plumbing applications. Brass flanges are important parts used in piping systems to connect pipes, valves, and equipment while providing easy access for maintenance and inspection. Brass flanges weight and dimensions chart PDF gives information about the composition.

Some of the advantages of using brass flanges are corrosion resistance, ductility and good thermal conductivity than other metal products. Brass flanges are used in a large variety of applications, including oil and gas, chemical processing, marine, power generation, pulp and paper, food and beverage and pharmaceuticals.

Brass Flanges Types

• 1. BRASS SLIP-ON FLANGES - The bore size of the brass slip-on flange as a standard is slightly larger than the outside diameter of the connecting pipe, as the pipe has to slide inside the flange then needs to be connected by the execution of the fillet weld around the border. Brass slip-on flanges weight and dimensions chart gives detailed data about these flanges.
• 2. BRASS WELD NECK FLANGES - Brass weld neck flanges are helpful in high/low-temperature applications and high-pressures that require an unlimited fluid flow conveyed by the piping system. These butt-weld end connection flanges are most usual in industrial applications to ensure a high strength connection between assemblies. Brass weld neck flanges weight and dimensions chart gives detailed data about these flanges.
• 3. BRASS BLIND FLANGES - Most piping systems require regular audit and blind/blank flanges are most usual inspection point. This brass blind flanges, when selected according to the suitable pressure class, can easily handle the tension caused by the liquid’s operating pressure and pressure flowing through the pipe. They are useful to ‘blank off’ valves, pipelines, etc. in almost all applications. Brass blind flanges weight and dimensions chart gives detailed data about these flanges.
• 4. BRASS THREADED FLANGES - You can build the brass threaded flanges without welding, and hence it is easy to remove. You do not have to use it for usages where bending stresses involve high pressure or temperatures. A seal weld is useful in combination with times. Brass threaded flanges weight and dimensions chart gives detailed data about these flanges.
• 5. BRASS LAP JOINT FLANGES - Lap joint flanges is a type of slip-on flange but made for connecting to a stub end for rotation. Lap joints are helpful to keep carbon/low alloy steel pipes with additional mechanical properties. Brass lap joint flanges are similar to slip-on flanges but are characterized by the radius-rounded interior edge of the flange face and generally come with a taller hub. Brass lap joint flanges weight and dimensions chart gives detailed data about these flanges.
• 6. BRASS SOCKET-WELD FLANGES - Smaller diameter socket weld and counter bore flanges handle the applications with high pressures like steam lines but with restricted spacing. You must ensure toughness possess internal welds—the bore of the pipe and flange match provides a good flow connection. Brass socket-weld flanges weight and dimensions chart gives detailed data about these flanges.

Brass Flanges Specifications

Brass flanges specifications are accessible in numerous grades. Brass flanges are manufactured in accordance with a variety of standards, including ASTM A182, ASTM A815, ANSI/ASME B16.5, DIN 55014 and BS EN 1092-1, with pressure ratings from Class 150, 300, 600, 2500 and beyond. Brass flanges are available in a wide range of sizes to accommodate different pipe diameters and system requirements. Refer to weight and dimensions chart PDF given in mm and kg, for knowing more in details about flange sizes and specifications.

ANSI B16.5 Class 150 Flanges Weight and Dimension Chart (mm, kg)

Nominal Pipe Size (inches)	Class 150
	Diameter of Flange (inches)	No. of Bolts	Diameter of Bolts (inches)	Diameter of Bolt Holes (inches)	Bolt Circle (inches)
1/4	3-3/8	4	1/2	0.62	2-1/4
1/2	3-1/2	4	1/2	0.62	2-3/8
3/4	3-7/8	4	1/2	0.62	2-3/4
1	4-1/4	4	1/2	0.62	3-1/8
1-1/4	4-5/8	4	1/2	0.62	3-1/2
1-1/2	5	4	1/2	0.62	3-7/8
2	6	4	5/8	0.75	4-3/4
2-1/2	7	4	5/8	0.75	5-1/2
3	7-1/2	4	5/8	0.75	6
3-1/2	8-1/2	8	5/8	0.75	7
4	9	8	5/8	0.75	7-1/2
5	10	8	3/4	0.88	8-1/2
6	11	8	3/4	0.88	9-1/2
8	13-1/2	8	3/4	0.88	11-3/4
10	16	12	7/8	1	14-1/4
12	19	12	7/8	1	17
14	21	12	1	1.12	18-3/4
16	23-1/2	16	1	1.12	21-1/4
18	25	16	1-1/8	1.25	22-3/4
20	27-1/2	20	1-1/8	1.25	25
24	32	20	1-1/4	1.38	29-1/2

ANSI B16.5 Class 300 Flanges Weight and Dimension Chart (mm, kg)

Nominal Pipe Size NPS (inches)	Class 300
	Diameter of Flange (inches)	No. of Bolts	Diameter of Bolts (inches)	Diameter of Bolt Holes (inches)	Bolt Circle (inches)
1/4	3-3/8	4	1/2	0.62	2-1/4
1/2	3-3/4	4	1/2	0.62	2-5/8
3/4	4-5/8	4	5/8	0.75	3-1/4
1	4-7/8	4	5/8	0.75	3-1/2
1-1/4	5-1/4	4	5/8	0.75	3-7/8
1-1/2	6-1/8	4	3/4	0.88	4-1/2
2	6-1/2	8	5/8	0.75	5
2-1/2	7-1/2	8	3/4	0.88	5-7/8
3	8-1/4	8	3/4	0.88	6-5/8
3-1/2	9	8	3/4	0.88	7-1/4
4	10	8	3/4	0.88	7-7/8
5	11	8	3/4	0.88	9-1/4
6	12-1/2	12	3/4	0.88	10-5/8
8	15	12	7/8	1	13
10	17-1/2	16	1	1.12	15-1/4
12	20-1/2	16	1-1/8	1.25	17-3/4
14	23	20	1-1/8	1.25	20-1/4
16	25-1/2	20	1-1/4	1.38	22-1/2
18	28	24	1-1/4	1.38	24-3/4
20	30-1/2	24	1-1/4	1.38	27
24	36	24	1-1/2	1.62	32

ANSI B16.5 Class 400 Flanges Weight and Dimension Chart (mm, kg)

Nominal Pipe Size NPS (inches)	Class 400
	Diameter of Flange (inches)	No. of Bolts	Diameter of Bolts (inches)	Diameter of Bolt Holes (inches)	Bolt Circle (inches)
1/4	3-3/8	4	1/2	0.62	2-1/4
1/2	3-3/4	4	1/2	0.62	2-5/8
3/4	4-5/8	4	5/8	0.75	3-1/4
1	4-7/8	4	5/8	0.75	3-1/2
1-1/4	5-1/4	4	5/8	0.75	3-7/8
1-1/2	6-1/8	4	3/4	0.88	4-1/2
2	6-1/2	8	5/8	0.75	5
2-1/2	7-1/2	8	3/4	0.88	5-7/8
3	8-1/4	8	3/4	0.88	6-5/8
3-1/2	9	8	7/8	1	7-1/4
4	10	8	7/8	1	7-7/8
5	11	8	7/8	1	9-1/4
6	12-1/2	12	7/8	1	10-5/8
8	15	12	1	1.12	13
10	17-1/2	16	1-1/8	1.25	15-1/4
12	20-1/2	16	1-1/4	1.38	17-3/4
14	23	20	1-1/4	1.38	20-1/4
16	25-1/2	20	1-3/8	1.5	22-1/2
18	28	24	1-3/8	1.5	24-3/4
20	30-1/2	24	1-1/2	1.62	27
24	36	24	1-3/4	1.88	32

ANSI B16.5 Class 600 Flanges Weight and Dimension Chart (mm, kg)

Nominal Pipe Size NPS (inches)	Class 600
	Diameter of Flange (inches)	No. of Bolts	Diameter of Bolts (inches)	Diameter of Bolt Holes (inches)	Bolt Circle (inches)
1/4	3-3/8	4	1/2	0.62	2-1/4
1/2	3-3/4	4	1/2	0.62	2-5/8
3/4	4-5/8	4	5/8	0.75	3-1/4
1	4-7/8	4	5/8	0.75	3-1/2
1-1/4	5-1/4	4	5/8	0.75	3-7/8
1-1/2	6-1/8	4	3/4	0.88	4-1/2
2	6-1/2	8	5/8	0.75	5
2-1/2	7-1/2	8	3/4	0.88	5-7/8
3	8-1/4	8	3/4	0.88	6-5/8
3-1/2	9	8	7/8	1	7-1/4
4	10-3/4	8	7/8	1	8-1/2
5	13	8	1	1.12	10-1/2
6	14	12	1	1.12	11-1/2
8	16-1/2	12	1-1/8	1.25	13-3/4
10	20	16	1-1/4	1.38	17
12	22	20	1-1/4	1.38	19-1/4
14	23-3/4	20	1-3/8	1.5	20-3/4
16	27	20	1-1/2	1.62	23-3/4
18	29-1/4	20	1-5/8	1.75	25-3/4
20	32	24	1-5/8	1.75	28-1/2
24	37	24	1-7/8	2	33

ANSI B16.5 Class 900 Flanges Weight and Dimension Chart (mm, kg)

Nominal Pipe Size NPS (inches)	Class 900
	Diameter of Flange (inches)	No. of Bolts	Diameter of Bolts (inches)	Diameter of Bolt Holes (inches)	Bolt Circle (inches)
1/2	4-3/4	4	3/4	0.88	3-1/4
3/4	5-1/8	4	3/4	0.88	3-1/2
1	5-7/8	4	7/8	1	4
1-1/4	6-1/4	4	7/8	1	4-3/8
1-1/2	7	4	1	1.12	4-7/8
2	8-1/2	8	7/8	1	6-1/2
2-1/2	9-5/8	8	1	1.12	7-1/2
3	9-1/2	8	7/8	1	7-1/2
4	11-1/2	8	1-1/8	1.25	9-1/4
5	13-3/4	8	1-1/4	1.38	11
6	15	12	1-1/8	1.25	12-1/2
8	18-1/2	12	1-3/8	1.5	15-1/2
10	21-1/2	16	1-3/8	1.5	18-1/2
12	24	20	1-3/8	1.5	21
14	25-1/4	20	1-1/2	1.62	22
16	27-3/4	20	1-5/8	1.75	24-1/2
18	31	20	1-7/8	2	27
20	33-3/4	20	2	2.12	29-1/2
24	41	20	2-1/2	2.62	35-1/2

ANSI B16.5 Class 2500 Flanges Weight and Dimension Chart (mm, kg)

Nominal Pipe Size NPS (inches)	Class 2500
	Diameter of Flange (inches)	No. of Bolts	Diameter of Bolts (inches)	Diameter of Bolt Holes (inches)	Bolt Circle (inches)
1/2	5-1/4	4	3/4	0.88	3-1/2
3/4	5-1/2	4	3/4	0.88	3-3/4
1	6-1/4	4	7/8	1	4-1/4
1-1/4	7-1/4	4	1	1.12	5-1/8
1-1/2	8	4	1-1/8	1.25	5-3/4
2	9-1/4	8	1	1.12	6-3/4
2-1/2	10-1/2	8	1-1/8	1.25	7-3/4
3	12	8	1-1/4	1.38	9
4	14	8	1-1/2	1.62	10-3/4
5	16-1/2	8	1-3/4	1.88	12-3/4
6	19	8	2	2.12	14-1/2
8	21-3/4	12	2	2.12	17-1/4
10	26-1/2	12	2-1/2	2.62	21-1/4
12	30	12	2-3/4	2.88	24-3/8