ANSI B16.5 Carbon Steel Flanges Weight, Dimensions Chart in mm, kg, PDF online

Carbon Steel Flanges are useful to connect valves, pumps, and pipes for the piping system. There are various types of flanges like welded, lap joints, blinds, and many others. The use of carbon steel flanges is very much high in demand. The reason is its best features like excellent durability, corrosion resistance, and finishing. It is useful in various industries and domains. These include agriculture, power, chemical, petrochemical, and others. The flange is an internal or external edge, or a rim (lip), for power like an iron plate flange, such as a T-beam or I-beam; or attachment to another component like a flange at the end of the screw, a steam lever, etc. Carbon Steel Flanges Weight and Dimensions Chart is given in mm and kg. For detailed measurements of carbon steel flanges, refer to dimensions chart below.

Carbon Steel Flanges Types

• 1. CARBON STEEL SLIP-ON FLANGES - The bore size of the Carbon Steel Slip-On Flange as a standard is slightly larger than the outside diameter of the connecting pipe, as the pipe has to slide inside the flange then needs to be connected by the execution of the fillet weld around the border. Carbon Steel Flanges Dimensions are in mm and kg.
• 2. CARBON STEEL WELD NECK FLANGES - Carbon Steel Weld Neck Flanges are helpful in high/low-temperature applications and high-pressures that require an unlimited fluid flow conveyed by the piping system. These butt-weld end connection flanges are most usual in industrial applications to ensure a high strength connection between assemblies. Refer to Dimensions Chart for detailed dimensions.
• 3. CARBON STEEL BLIND FLANGES - Most piping systems require regular audit and blind/blank flanges are most usual inspection point. This Carbon Steel Blind Flanges, when selected according to the suitable pressure class, can easily handle the tension caused by the liquid’s operating pressure and pressure flowing through the pipe. They are useful to ‘blank off’ valves, pipelines, etc. in almost all applications. Carbon Steel Flanges Dimensions are in mm and kg.
• 4. CARBON STEEL THREADED FLANGES - You can build the Carbon Steel Threaded Flanges without welding, and hence it is easy to remove. You do not have to use it for usages where bending stresses involve high pressure or temperatures. A seal weld is useful in combination with times. Refer to Dimensions Chart for detailed dimensions.
• 5. CARBON STEEL LAP JOINT FLANGES - Lap Joint Flanges is a type of slip-on flange but made for connecting to a stub end for rotation. Lap joints are helpful to keep carbon/low alloy steel pipes with additional mechanical properties. Carbon Steel Lap Joint flanges are similar to slip-on flanges but are characterized by the radius-rounded interior edge of the flange face and generally come with a taller hub. Carbon Steel Flanges Dimensions are in mm and kg.
• 6. CARBON STEEL SOCKET-WELD FLANGES - Smaller diameter socket weld and counter bore flanges handle the applications with high pressures like steam lines but with restricted spacing. You must ensure toughness possess internal welds—the bore of the pipe and flange match provides a good flow connection. Refer to Dimensions Chart for detailed dimensions of Carbon Steel Socket-Weld Flanges.

Carbon Steel Flanges Specifications

Carbon Steel Flanges specifications are accessible in numerous grades, class, sizes and standards. The dimensions in which Carbon Steel Flanges are available are ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc. The various standards are ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc. Size of the carbon steel flanges ranges from 1/2″ to 48″. The class or pressure in which they are available are 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc. Refer to Dimensions Chart for detailed dimensions.

ANSI B16.5 Class 150 Carbon Steel Flanges Weight and Dimension Chart (mm, kg)

Nominal Pipe Size (inches)	Class 150
	Diameter of Flange (inches)	No. of Bolts	Diameter of Bolts (inches)	Diameter of Bolt Holes (inches)	Bolt Circle (inches)
1/4	3-3/8	4	1/2	0.62	2-1/4
1/2	3-1/2	4	1/2	0.62	2-3/8
3/4	3-7/8	4	1/2	0.62	2-3/4
1	4-1/4	4	1/2	0.62	3-1/8
1-1/4	4-5/8	4	1/2	0.62	3-1/2
1-1/2	5	4	1/2	0.62	3-7/8
2	6	4	5/8	0.75	4-3/4
2-1/2	7	4	5/8	0.75	5-1/2
3	7-1/2	4	5/8	0.75	6
3-1/2	8-1/2	8	5/8	0.75	7
4	9	8	5/8	0.75	7-1/2
5	10	8	3/4	0.88	8-1/2
6	11	8	3/4	0.88	9-1/2
8	13-1/2	8	3/4	0.88	11-3/4
10	16	12	7/8	1	14-1/4
12	19	12	7/8	1	17
14	21	12	1	1.12	18-3/4
16	23-1/2	16	1	1.12	21-1/4
18	25	16	1-1/8	1.25	22-3/4
20	27-1/2	20	1-1/8	1.25	25
24	32	20	1-1/4	1.38	29-1/2

ANSI B16.5 Class 300 Carbon Steel Flanges Weight and Dimension Chart (mm, kg)

Nominal Pipe Size NPS (inches)	Class 300
	Diameter of Flange (inches)	No. of Bolts	Diameter of Bolts (inches)	Diameter of Bolt Holes (inches)	Bolt Circle (inches)
1/4	3-3/8	4	1/2	0.62	2-1/4
1/2	3-3/4	4	1/2	0.62	2-5/8
3/4	4-5/8	4	5/8	0.75	3-1/4
1	4-7/8	4	5/8	0.75	3-1/2
1-1/4	5-1/4	4	5/8	0.75	3-7/8
1-1/2	6-1/8	4	3/4	0.88	4-1/2
2	6-1/2	8	5/8	0.75	5
2-1/2	7-1/2	8	3/4	0.88	5-7/8
3	8-1/4	8	3/4	0.88	6-5/8
3-1/2	9	8	3/4	0.88	7-1/4
4	10	8	3/4	0.88	7-7/8
5	11	8	3/4	0.88	9-1/4
6	12-1/2	12	3/4	0.88	10-5/8
8	15	12	7/8	1	13
10	17-1/2	16	1	1.12	15-1/4
12	20-1/2	16	1-1/8	1.25	17-3/4
14	23	20	1-1/8	1.25	20-1/4
16	25-1/2	20	1-1/4	1.38	22-1/2
18	28	24	1-1/4	1.38	24-3/4
20	30-1/2	24	1-1/4	1.38	27
24	36	24	1-1/2	1.62	32

ANSI B16.5 Class 400 Carbon Steel Flanges Weight and Dimension Chart (mm, kg)

Nominal Pipe Size NPS (inches)	Class 400
	Diameter of Flange (inches)	No. of Bolts	Diameter of Bolts (inches)	Diameter of Bolt Holes (inches)	Bolt Circle (inches)
1/4	3-3/8	4	1/2	0.62	2-1/4
1/2	3-3/4	4	1/2	0.62	2-5/8
3/4	4-5/8	4	5/8	0.75	3-1/4
1	4-7/8	4	5/8	0.75	3-1/2
1-1/4	5-1/4	4	5/8	0.75	3-7/8
1-1/2	6-1/8	4	3/4	0.88	4-1/2
2	6-1/2	8	5/8	0.75	5
2-1/2	7-1/2	8	3/4	0.88	5-7/8
3	8-1/4	8	3/4	0.88	6-5/8
3-1/2	9	8	7/8	1	7-1/4
4	10	8	7/8	1	7-7/8
5	11	8	7/8	1	9-1/4
6	12-1/2	12	7/8	1	10-5/8
8	15	12	1	1.12	13
10	17-1/2	16	1-1/8	1.25	15-1/4
12	20-1/2	16	1-1/4	1.38	17-3/4
14	23	20	1-1/4	1.38	20-1/4
16	25-1/2	20	1-3/8	1.5	22-1/2
18	28	24	1-3/8	1.5	24-3/4
20	30-1/2	24	1-1/2	1.62	27
24	36	24	1-3/4	1.88	32

ANSI B16.5 Class 600 Carbon Steel Flanges Weight and Dimension Chart (mm, kg)

Nominal Pipe Size NPS (inches)	Class 600
	Diameter of Flange (inches)	No. of Bolts	Diameter of Bolts (inches)	Diameter of Bolt Holes (inches)	Bolt Circle (inches)
1/4	3-3/8	4	1/2	0.62	2-1/4
1/2	3-3/4	4	1/2	0.62	2-5/8
3/4	4-5/8	4	5/8	0.75	3-1/4
1	4-7/8	4	5/8	0.75	3-1/2
1-1/4	5-1/4	4	5/8	0.75	3-7/8
1-1/2	6-1/8	4	3/4	0.88	4-1/2
2	6-1/2	8	5/8	0.75	5
2-1/2	7-1/2	8	3/4	0.88	5-7/8
3	8-1/4	8	3/4	0.88	6-5/8
3-1/2	9	8	7/8	1	7-1/4
4	10-3/4	8	7/8	1	8-1/2
5	13	8	1	1.12	10-1/2
6	14	12	1	1.12	11-1/2
8	16-1/2	12	1-1/8	1.25	13-3/4
10	20	16	1-1/4	1.38	17
12	22	20	1-1/4	1.38	19-1/4
14	23-3/4	20	1-3/8	1.5	20-3/4
16	27	20	1-1/2	1.62	23-3/4
18	29-1/4	20	1-5/8	1.75	25-3/4
20	32	24	1-5/8	1.75	28-1/2
24	37	24	1-7/8	2	33

ANSI B16.5 Class 900 Carbon Steel Flanges Weight and Dimension Chart (mm, kg)

Nominal Pipe Size NPS (inches)	Class 900
	Diameter of Flange (inches)	No. of Bolts	Diameter of Bolts (inches)	Diameter of Bolt Holes (inches)	Bolt Circle (inches)
1/2	4-3/4	4	3/4	0.88	3-1/4
3/4	5-1/8	4	3/4	0.88	3-1/2
1	5-7/8	4	7/8	1	4
1-1/4	6-1/4	4	7/8	1	4-3/8
1-1/2	7	4	1	1.12	4-7/8
2	8-1/2	8	7/8	1	6-1/2
2-1/2	9-5/8	8	1	1.12	7-1/2
3	9-1/2	8	7/8	1	7-1/2
4	11-1/2	8	1-1/8	1.25	9-1/4
5	13-3/4	8	1-1/4	1.38	11
6	15	12	1-1/8	1.25	12-1/2
8	18-1/2	12	1-3/8	1.5	15-1/2
10	21-1/2	16	1-3/8	1.5	18-1/2
12	24	20	1-3/8	1.5	21
14	25-1/4	20	1-1/2	1.62	22
16	27-3/4	20	1-5/8	1.75	24-1/2
18	31	20	1-7/8	2	27
20	33-3/4	20	2	2.12	29-1/2
24	41	20	2-1/2	2.62	35-1/2

ANSI B16.5 Class 2500 Carbon Steel Flanges Weight and Dimension Chart (mm, kg)

Nominal Pipe Size NPS (inches)	Class 2500
	Diameter of Flange (inches)	No. of Bolts	Diameter of Bolts (inches)	Diameter of Bolt Holes (inches)	Bolt Circle (inches)
1/2	5-1/4	4	3/4	0.88	3-1/2
3/4	5-1/2	4	3/4	0.88	3-3/4
1	6-1/4	4	7/8	1	4-1/4
1-1/4	7-1/4	4	1	1.12	5-1/8
1-1/2	8	4	1-1/8	1.25	5-3/4
2	9-1/4	8	1	1.12	6-3/4
2-1/2	10-1/2	8	1-1/8	1.25	7-3/4
3	12	8	1-1/4	1.38	9
4	14	8	1-1/2	1.62	10-3/4
5	16-1/2	8	1-3/4	1.88	12-3/4
6	19	8	2	2.12	14-1/2
8	21-3/4	12	2	2.12	17-1/4
10	26-1/2	12	2-1/2	2.62	21-1/4
12	30	12	2-3/4	2.88	24-3/8