UNS C23000 Copper Alloy Chemical Composition & Properties, Grades, Charts and PDF Online

UNS C23000 is an alloy of copper and zinc, which were chosen because of their superior machining and corrosion resistance properties. The alloy has a chemical composition of approximately 84% copper and 16% zinc. It exhibits excellent ductility and high electrical conductivity due to a combination of these two components. Generally employed in architecture as well as in manufacturing plumbing fixtures and electrically conductive components, it delivers good formability and joining i.e., solderability. The C23000 grade shows variability with regards to temper with the available options being annealed, quarter-hard, half-hard and full-hard. Its mechanical properties, thermal conductivity, and corrosion resistance can be seen in the charts available online, providing design engineers with the basis to choose the best material for a wide range of industrial applications. Table, chart and pdf documents consisting of detailed information about the characteristics and properties of the C23000 alloy can be found throughout metallurgical sites.

UNS C23000 Copper Alloy Chemical Composition And Grade Table

UNS C23000 are an alloy of copper (Cu), which contains small amounts of other unknown components. The key factor of the copper anode is the silicon- and iron-related impurities in the anode, the anode's chemical composition of the anode is typically consists of 95.0-96.0% copper and 1.0-3.0% zinc. This is based on the basic features of being very easy to shape, having good resistance to corrosion and providing excellent electrical conductivity which would make it ideal for plumbing, electrical components and building projects. It falls under ASTM B134/B134M and is considered as Grade 230 in accordance with the ASTM B134/B134M standard specification of brass wire. UNS C23000 has been demonstrated capacity to demonstrate good formability, and the material can be fabricated into various intricate shapes that are useful in different industries applications.

UNS C23000 Copper Alloy Composition Table
Elements Cu Pb Zn Fe
Min (%) 84.0 - - -
Max (%) 86 0.05 Rem 0.05

The Advantages and Disadvantages of UNS C23000 Copper Material Properties, C23000 Properties

    Advantages:

  • Excellent Thermal Conductivity: UNS C23000 Copper has outstanding thermal conductivity, therefore, it is widely used in applications when the heat transfer is needed, e.g. heat exchangers and HVAC systems.

  • Superb Electrical Conductivity: It is an electrical conductor with a high electrical conductivity which makes it the best choice for electrical wiring, connectors, and other electrical components.

  • Corrosion Resistance: UNS C23000 Copper is known for the good corrosion resistance, thus it proves to be long lasting in various environments just as marine and industrial.

  • Ease of Fabrication: This copper alloy is convenient for processing, enabling simplified bending, forming, and machining that can help ease the process of manufacturing.

  • Recyclability: Similar to all copper alloys, UNS C23000 Copper is fully recyclable, which helps in promoting sustainability and environmental friendliness.

    Disadvantages:

  • Cost: The cost of copper made by UNS C23000 may be higher than other materials because of the high quality and desirable features it has, which may affect project budgets.

  • Oxidation Susceptibility: It may be subjected to oxidation with time, causing the appearance of patina or tarnish on the unprotected surfaces which in some instances may affect originality.

  • Work Hardening: UNS C23000 Copper has work hardening properties during forming or shaping processes and thus, annealing or other treatments are needed to restore ductility and machinability.

  • Limited Strength: C23000 Copper has reasonable strength for a copper alloy, but it may not be strong enough for some other materials, limiting its applications in high-stress conditions.

  • Compatibility Issues: It might not work under certain conditions and might be incompatible with some substances, for example, acids or alkalis that can corrode it or destroy if no necessary measures are taken.

Related Topics

Here is another related topic that you may also like.

Frequently Asked Questions

FAQs
What is UNS C23000 Copper Alloy, and what are the main features of it?

UNS C23000 Copper Alloy is a copper alloy, which has good corrosion resistance, high machinability, and good electrical conductivity. It is mostly used in different areas where these properties are needed.

What are the mostly related applications of UNS C23000 Copper Alloy?

Corrosion resistance and machinability are the key features capable of making the product eligible for the applications of plumbing fittings, valves, pump parts, electrical components, and architectural elements.

What is the chemical composition of UNS C23000 Copper Alloy and how does it affect its properties?

UNS C23000 Copper Alloy is basically copper (Cu) with several other elements as alloys such as zinc (Zn) and sometimes tin (Sn). Develops the component’s resistance to corrosion, machinability, and mechanical properties.

What are the mechanical properties of UNS C23000 Copper Alloy, like tensile strength, hardness, and elongation?

The mechanical properties of UNS C23000 Copper Alloy are dependent on parameters like temper and the process of fabrication. Generally, it is frequently present in materials that have moderate tensile strength, good ductility, and hardness suitable for many engineering applications.