Live metals rate

AISI 1033 Carbon Steel Chemical Properties, Grade, Charts and Document

AISI 1033 steel is medium-carbon, which is good in terms of both welding and machining capabilities. Its composition is carbons, manganese, phosphorus, sulfur, and so on. This AISI 1033 designation indicates that it follows the American Iron and Steel Institute quality factors. They are many times used in the projects that needs average not too high strength and durability. Normally, the chemical characteristics comprise of a carbon content of 0.30-0.38% whereas manganese content, around 0.60-0.90%. The presents of such data on charts are provided by material manufacturers in their product data sheets, and they clarify the mechanical properties like tensile strength, yield strength, and elongation. These documents will explain the sectional analysis of the steel, the appropriate heat treatment regimen, and the physical properties of the steel, which will contribute to the selection of proper material and usage.

AISI 1033 Carbon Steel Chemical Composition And Grade Table

AISI 1033 is a low carbon steel which is highly valued for its excellent weldability and turning properties. Normally, it is a carbonate, manganese, phosphorus, and sulfur compounds, with traces of other elements of small amounts. The carbon content in a Low carbon steel alloy may vary between 0.30% to 0.38%, which places it within the medium carbon steel group. Such grade has a good combination of strength and toughness, which means that it can be applied to arous activities that are ranging from manufacturing to construction. AISI 1033 is typically implemented as shafts, gears, bolts, etc. wherever its properties such as hardness and elongation to fracture can be used. Below is a typical chemical composition and grade table for AISI 1033 carbon steel:

AISI 1033 Carbon Steel Composition Table
Elements C Mn P S B Cu Cr Mo Nb Pb Fe
Min (%) 0.3 0.7 - - 0.0005 0.2 - - - 0.15 -
Max (%) 0.36 1 0.03 0.035 0.0003 - 0.15 0.06 0.2 0.35 Balance

Related Topics

Here is another related topic that you may also like.

Raw Material Prices (Updated as on: 15 May 2024 04:29 PM) LIVE RATES

MetalsPrice/TonnePrice/KG
Nickel$19,223₹1,605.20
LME$19,149₹1,599.02
Copper$10,909₹910.93
LME$10,185₹850.52
Aluminum$2,569₹214.51
LME$2,537₹211.82
Zinc$3,009₹251.29
LME$2,974₹248.34
Lead$2,283₹190.62
LME$2,251₹187.93

Currency Rates (Updated as on: 15 May 2024 04:29 PM) LIVE RATES

  • 1 USD = 83.5 INR
  • 1 CNY = 11.56 INR
  • 1 AED = 22.74 INR
  • 1 USD = 3.67 AED
  • 1 USD = 7.22 CNY
Stainless Steel
Carbon Steel
Alloy Steel
Copper
Aluminium
Monel
Inconel
Brass
Titanium
Tantalum
Duplex
Hastelloy
Incoloy
Nickel Alloy