ANSI B16.9 Carbon Steel ButtWeld Fittings, Dimensions Chart in mm, kg, PDF online

A buttweld fitting is a pipe fitting that is weldable that allows for change of direction of flow, to branch off, reduces pipe size or attach additional equipment. A buttweld fitting is produced by the process of hot or cold forming, which means that it is bended and moulded to the correct shape. They are also heat treated to remove residual stresses and to achieve special mechanical properties. The ends of buttweld fittings have to be bevelled and the exact shape and form of the bevel depends upon the wall thickness of the pipe it is being attached to. The material of a buttweld fitting can be any one of a number of exotic materials such as super duplex, nickel alloy or 6% Molybdenum. The most of the time, the material of the fitting is the same as the pipe system that it is welded to. Carbon Steel Buttweld Fittings Dimensions Chart is given below.

• Carbon Steel Buttweld Fitting: Carbon Steel Buttweld fittings are major part of piping systems that allows to change the flow direction, reduce pipe size, and to branch off or attach the piping equipment. These buttweld fittings use welded or seamless pipe as staring material. These are shaped using hot and cold forming into reducer, tees, elbows, stub ends and caps. Carbon steel is a usual material that used for the development of buttweld fittings due to its unique chemical and mechanical properties. Carbon Steel Buttweld Fittings are defined by the schedule and size of pipes. For detailed measurements, refer to Dimensions Chart given below.
  
  Features:
  1. Carbon Steel Buttweld Fittings offer low strength and high ductility to resist in hostile conditions. This feature makes them suitable for machining and welding process.
  2. Need less maintenance and possess longer service life.
  3. The higher carbon content offers excellent hardness at higher pressure and temperature conditions.
  4. Offer leakage-proof and strong connection to perform effectively in the piping systems.
  5. Excellent resistivity and higher durability in reducing conditions.
  6. Reduces the disturbance and pressure drops inside the pipeline.
  
  Applications:
  These buttweld fittings are used in the structural shapes, construction, automobile, pipelines and bridge parts. Due to outstanding strength and wear resistance, these fittings are used in fuel processing, oil and gas processing, chemical equipment, power generation and other applications. Carbon Steel Buttweld Fittings are also being used in the nuclear plant, boilers, heat exchangers, refineries etc. Carbon Steel Buttweld Fittings Dimensions Chart is given below.

Specifications of Carbon Steel Buttweld Fittings

The dimensional specifications of the carbon steel buttweld fittings we supply are in accordance with the American National Standards Institute (ANSI): ANSI B16.9, MSS SP43 and MSS SP75. All the specifications of buttweld fittings are mentioned in the Dimensions Chart below.

Types of Carbon Steel Buttweld fitting:

The types of carbon steel buttweld fitting are:

• Elbows
• Tees
• Reducers
• Cap
• Stub End

ANSI B16.9/B16.28 90°/45° Long and Short Radius Elbow Weight and Dimension Chart (mm, kg)

Nominal Pipe Size (NPS)	Outside Diameter at Bevel(OD)	Center to End
		Long Radius Elbow		Short Radius Elbow
		90 degree. A	45 degree B	90 degree A
1/2	21.3	38.1	15.7	-
3/4	26.7	38.1	19.1	-
1	33.4	38.1	22.4	25.4
1-1/4	42.2	47.8	25.4	31.8
1-1/2	48.3	57.2	28.4	38.1
2	60.3	76.2	35.1	50.8
2-1/2	73.0	95.2	44.4	63.5
3	88.9	114.3	50.8	76.2
3-1/2	101.6	133.4	57.2	88.9
4	114.3	152.4	63.5	101.6
5	141.3	190.5	79.2	127.0
6	168.3	228.6	95.2	152.4
8	219.1	304.8	127.0	203.2
10	273.1	381.0	158.8	254.0
12	323.9	457.2	190.5	304.8
14	355.6	533.4	222.2	355.6
16	406.4	609.6	254.0	406.4
18	457.2	685.8	285.8	457.2
20	508.0	762.0	317.5	508.0
22	558.8	838.2	342.9	558.8
24	609.6	914.4	381.0	609.6
26	660.4	990.6	406.4	660.4
28	711.2	1066.8	438.2	711.2
30	762.0	1143.0	469.9	762.0
32	812.8	1219.2	501.6	812.8
34	863.6	1295.4	533.4	863.6
36	914.4	1371.6	565.2	914.4
38	965.2	1447.8	599.9	-
40	1016.0	1524.0	632.0	1016.0
42	1066.8	1600.2	660.4	1066.8
44	1117.6	1676.4	695.5	1117.6
46	1168.4	1752.6	726.9	-
48	1219.2	1828.8	759.0	1219.2
52*	1320.8	-	-	1320.8
54*	1371.6	2057.4	852.2	1371.6
56*	1422.4	2133.6	883.8	1422.4
60*	1524.0	2286.0	946.9	1524.0
66*	1676.4	2514.6	1041.6	-
68*	1727.0	2591	1073	1727
72*	1829.0	2743	1137	1829
76*	1930.0	2896	1199	1930
80*	2032.0	3048	1263	2032

ANSI B16.9/B16.28 180° Long and Short Radius Elbow Weight and Dimension Chart (mm, kg)

Nominal Pipe Size (NPS)	Outside Diameter at Bevel OD	Long Radius Elbow		Short Radius Elbow
		Short Radius Elbow		Center to Center. P	Back to Face K
1/2	21.3	76.2	47.8	-	-
3/4	26.7	76.2	50.8	-	-
1	33.4	76.2	55.6	50.8	41.1
1-1/4	42.2	95.2	69.8	63.5	52.3
1-1/2	48.3	114.3	82.6	76.2	62.0
2	60.3	152.4	106.4	101.6	81.0
2-1/2	73.0	109.5	131.8	127.0	100.1
3	88.9	228.6	158.8	152.4	120.7
3-1/2	101.6	266.7	184.2	177.8	139.7
4	114.3	304.8	209.6	203.2	158.8
5	141.3	381.0	261.9	254.0	196.9
6	168.3	457.2	312.7	304.8	236.5
8	219.1	609.6	414.3	406.4	312.7
10	273.1	762.0	517.7	508.0	390.7
12	323.9	914.4	619.3	609.6	466.9
14	355.6	1066.8	711.2	711.2	533.4
16	406.4	1219.2	812.8	812.8	609.6
18	457.2	1371.6	914.4	914.4	685.8
20	508.0	1524.0	1016.0	1016.0	762.0
22	558.8	1676.4	1117.6	1117.6	838.2
24	609.6	1828.8	1219.2	1219.2	914.4

ANSI B16.9 / MSS SP-75 Equal Tee/Reducing Tee Weight and Dimension Chart (mm, kg)

Nominal Pipe Size (NPS)	Outside Diameter At Bevel D		Center to End
	Run	Outlet	Run C	Outlet (1) M
1/2 x 1/2	21.3	21.3	25.4	25.4
1/2 x 3/8		17.1		25.4
1/2 x 1/4		13.7		25.4
3/4 x 3/4	26.7	26.7	28.4	28.4
3/4 x 1/2		21.3		28.4
3/4 x 3/8		17.1		28.4
1 x 1	33.4	33.4	38.1	38.1
1 x 3/4		26.7		38.1
1 x 1/2		21.3		38.1
1-1/4 x 1-1/4	42.2	42.2	47.8	47.8
1-1/4 x 1		33.4		47.8
1-1/4 x 3/4		26.7		47.8
1-1/4 x 1/2		21.3		47.8
1-1/2 x 1-1/2	48.3	48.3	57.2	57.2
1-1/2 x 1-1/4		42.2		57.2
1-1/2 x 1		33.4		57.2
1-1/2 x 3/4		26.7		57.2
1-1/2 x 1/2		21.3		57.2
2 x 2	60.3	60.3	63.5	63.5
2 x 1-1/2		48.3		60.5
2 x 1-1/4		42.2		57.2
2 x 1		33.4		50.8
2 x 3/4		26.7		44.4
2 x 1/2*		21.3
2-1/2 x 2-1/2	73.0	73.0	76.2	76.2
2-1/2 x 2		60.3		69.8
2-1/2 x 1-1/2		48.3		66.5
2-1/2 x 1-1/4		42.2		63.5
2-1/2 x 1		33.4		57.2
3 x 3	88.9	88.9	85.9	85.9
3 x 2-1/2		73.0		82.6
3 x 2		60.3		76.2
3 x 1-1/2		48.3		73.2
3 x 1-1/4		42.2		69.8
3 x 1*		33.4
3-1/2 x 3-1/2	101.6	101.6	95.2	95.2
3-1/2 x 3		88.9		91.9
3-1/2 x 2-1/2		73.0		88.9
3-1/2 x 2		60.3		82.6
3-1/2 x 1-1/2		48.3		79.2

ANSI B16.9 / MSS SP-75 Equal Tee/Reducing Tee Weight and Dimension Chart (mm, kg)

Nominal Pipe Size (NPS)	Outside Diameter At Bevel D		Center to End
	Run	Outlet	Run C	Outlet (1) M
4 x 4	114.3	114.3	104.6	104.6
4 x 3-1/2		101.6		101.6
4 x 3		88.9		98.6
4 x 2-1/2		73.0		95.2
4 x 2		60.3		88.9
4 x 1-1/2		48.3		85.9
4 x 1-1/4		42.2
4 x 1*		33.5
5 x 5	141.3	141.3	124.0	124.0
5 x 4		114.3		117.3
5 x 3-1/2		101.6		114.3
5 x 3		88.9		111.3
5 x 2-1/2		73.0		108.0
5 x 2		60.3		104.6
5 x 1-1/2*		48.3
6 x 6	168.3	168.3	142.7	142.7
6 x 5		141.3		136.7
6 x 4		114.3		130.0
6 x 3-1/2		101.6		127.0
6 x 3		88.9		124.0
6 x 2-1/2		73.0		120.6
6 x 2*		60.3
8 x 8	19.1	219.1	177.8	177.8
8 x 6		168.3		168.1
8 x 5		141.3		162.1
8 x 4		114.3		155.4
8 x 3-1/2		101.6		152.4
8 x 3*		88.9
10 x 10	273.1	273.1	215.9	215.9
10 x 8		219.1		203.2
10 x 6		168.3		193.5
10 x 5		141.3		190.5
10 x 4		114.3		184.2
12 x 12	323.9	323.9	254.0	254.0
12 x 10		273.1		241.3
12 x 8		219.1		228.6
12 x 6		168.3		218.9
12 x 5		141.3		215.9

ANSI B16.9 / MSS SP-75 Equal Tee/Reducing Tee Weight and Dimension Chart (mm, kg)

Nominal Pipe Size (NPS)	Outside Diameter At Bevel D		Center to End
	Run	Outlet	Run C	Outlet (1) M
14 x 14	355.6	355.6	279.4	279.4
14 x 12		323.9		269.7
14 x 10		273.1		257.0
14 x 8		219.1		247.6
14 x 6		168.3		238.3
16 x 16	406.4	406.4	304.8	304.8
16 x 14		355.6		304.8
16 x 12		323.9		295.1
16 x 10		273.1		282.4
16 x 8		219.1		373.0
16 x 6		168.3		263.7
18 x 18	457.2	457.2	342.9	342.9
18 x 16		406.4		330.2
18 x 14		355.6		330.2
18 x 12		323.9		320.5
18 x 10		273.1		307.8
18 x 8		219.1		298.4
20 x 20	508.0	508.0	381.0	381.0
20 x 18		457.2		369.3
20 x 16		406.4		355.6
20 x 14		355.6		355.6
20 x 12		323.9		345.9
20 x 10		273.1		333.2
20 x 8		219.1		323.8
22 x 22	558.8	558.8	419.1	419.1
22 x 20		508.0		406.4
22 x 18		457.2		393.7
22 x 16		406.4		381.0
22 x 14		355.6		381.0
22 x 12		323.9		371.3
22 x 10		273.1		358.6
24 x 24	609.6	609.6	431.8	431.8
24 x 22		558.8		431.8
24 x 20		508.0		431.8
24 x 18		457.2		419.1
24 x 16		406.4		406.4
24 x 14		355.6		406.4
24 x 12		323.9		396.7
24 x 10		273.1		384.0
26 x 26	660.4	660.4	495.3	495.3
26 x 24		609.6		482.6

ANSI B16.9 / MSS SP-75 Equal Tee/Reducing Tee Weight and Dimension Chart (mm, kg)

>

Nominal Pipe Size (NPS)	Outside Diameter At Bevel D		Center to End
	Run	Outlet	Run C	Outlet (1) M
26 x 22		558.8		469.9
26 x 20		508.0		457.2
26 x 18		457.2		444.5
26 x 16		406.4		431.8
26 x 14		355.6		431.8
26 x 12		323.1		422.1
28 x 28	711.2	711.2	520.7	520.7
28 x 26		660.4		520.7
28 x 24		609.6		508.0
28 x 22		558.8		495.3
28 x 20		508.0		482.6
28 x 18		457.2		469.9
28 x 16		406.4		457.2
28 x 14		355.6		457.2
28 x 12		323.1		447.5
30 x 30	762.0	762.0	558.8	558.8
30 x 28		711.2		546.1
30 x 26		660.4		546.1
30 x 24		609.6		533.4
30 x 22		558.8		520.7
30 x 20		508.0		508.0
30 x 18		457.2		495.3
30 x 16		406.4		482.6
30 x 14		355.6		482.6
30 x 12		323.9		472.6
30 x 10		273.1		460.2
32 x 32	812.8	812.8	596.9	596.9
32 x 30		762.0		584.2
32 x 28		711.2		571.5
32 x 26		660.4		571.5
32 x 24		609.6		558.8
32 x 22		558.8		546.1
32 x 20		508.0		533.4
32 x 18		457.2		520.7
32 x 16		406.4		508.0
32 x 14		355.6		508.0
34 x 34	863.6	863.6	635.0	635.0
34 x 32		812.8		622.3
34 x 30		762.0		609.6
34 x 28		711.2		596.9
34 x 26		660.4		596.9

ANSI B16.9 / MSS SP-75 Equal Tee/Reducing Tee Weight and Dimension Chart (mm, kg)

Nominal Pipe Size (NPS)	Outside Diameter At Bevel D		Center to End
	Run	Outlet	Run C	Outlet (1) M
34 x 24		609.6		584.2
34 x 22		558.8		571.5
34 x 20		508.0		558.8
34 x 18		457.2		546.1
34 x 16		406.4		533.4
36 x 36	914.4	914.4	673.1	673.1
36 x 34		863.6		660.4
36 x 32		812.8		647.7
36 x 30		762.0		635.0
36 x 28		711.2		622.3
36 x 26		660.4		622.3
36 x 24		609.6		609.6
36 x 22		558.8		596.9
36 x 20		508.0		584.2
36 x 18		457.2		571.5
36 x 16		406.4		558.8
38 x 38	965.2	965.2	711.2	711.2
38 x 36		914.4		711.2
38 x 34		863.6		698.5
38 x 32		812.8		685.8
38 x 30		762.0		673.1
38 x 28		711.2		647.7
38 x 26		660.4		647.7
38 x 24		609.6		635.0
38 x 22		558.8		622.3
38 x 20		508.0		609.6
38 x 18		457.2		596.9
40 x 40	1016.0	1016.0	749.3	749.3
40 x 38		965.2		749.3
40 x 36		914.4		736.6
40 x 34		863.6		723.9
40 x 32		812.8		711.2
40 x 30		762.0		698.5
40 x 28		711.2		673.1
40 x 26		660.4		673.1
40 x 24		609.6		660.4
40 x 22		558.8		647.7
40 x 20		508.0		635.0
40 x 18		457.2		622.3
42 x 42	1066.8	1066.8	762.0	711.2
42 x 40		1016.0		711.2

ANSI B16.9 / MSS SP-75 Equal Tee/Reducing Tee Weight and Dimension Chart (mm, kg)

Nominal Pipe Size (NPS)	Outside Diameter At Bevel D		Center to End
	Run	Outlet	Run C	Outlet (1) M
42 x 38		965.2		711.2
42 x 36		914.4		711.2
42 x 34		863.6		711.2
42 x 32		812.8		711.2
42 x 30		762.0		711.2
42 x 28	1066.8	711.2	762.0	698.5
42 x 26		660.4		698.5
42 x 24		609.6		660.4
42 x 22		558.8		660.4
42 x 20		508.0		660.4
42 x 18		457.2		647.7
42 x 16		406.4		635.0
44 x 44	1117.6	1117.6	812.8	762.0
44 x 42		1066.8		762.0
44 x 40		1016.0		749.3
44 x 38		965.2		736.6
44 x 36		914.4		723.9
44 x 34		863.6		723.9
44 x 32		812.8		711.2
44 x 30		762.0		711.2
44 x 28		711.2		698.5
44 x 26		660.4		698.5
44 x 24		609.6		698.5
44 x 22		558.8		685.8
44 x 20		508.0		685.8
46 x 46	1168.4	1168.4	850.9	800.1
46 x 44		1117.6		800.1
46 x 42		1066.8		787.4
46 x 40		1016.0		774.7
46 x 38		965.2		762.0
46 x 36		914.4		762.0
46 x 34		863.6		749.3
46 x 32		812.8		749.3
46 x 30		762.0		736.6
46 x 28		711.2		736.6
46 x 26		660.4		736.6
46 x 24		609.6		723.9
46 x 20*		508.0		723.9
48 x 48	1219.2	1219.2	889.0	838.2
48 x 46		1168.4		838.2
48 x 44		1117.6		838.2
48 x 42		1066.8		812.8
48 x 40		1016.0		812.8
48 x 38		965.2		812.8
48 x 36		914.4		787.4
48 x 34		863.6		787.4
48 x 32	1219.2	812.8	889.0	787.4
48 x 44		1117.6		838.2
48 x 42		1066.8		812.8
48 x 40		1016.0		812.8
48 x 38		965.2		812.8
48 x 36		914.4		787.4
48 x 34		863.6		787.4
48 x 32		812.8		787.4
48 x 30		762.0		762.0
48 x 28		711.2		762.0
48 x 26		660.4		762.0
48 x 24		609.6		736.6
48 x 22		558.8		736.6
52 x 52*	1320.8	1320.8	965.2	914.4
52 x 48*		1219.2		863.6
52 x 44*		1117.6		812.8
52 x 40*		1016.0		762.0
54 x 54*	1371.6	1371.6	1003.3	952.5
54 x 52*		1320.8		914.4
54 x 48*		1219.2		863.6
54 x 44*		1117.6		863.6
54 x 40*		1016.0		812.8
54 x 28*		711.2		787.4
54 x 20*		508.0		787.4
56 x 56*	1422.4	1422.4	1041.4	965.2
56 x 52*		1320.8		914.4
56 x 48*		1219.2		863.6
56 x 44*		1117.6		812.8
56 x 40*		1016.0		812.8
56 x 28*		711.2		812.8
56 x 20*		508.0		812.8
60 x 60*	1524.0	1524.0	1117.6	1016.0
60 x 56*		1422.4		965.2
60 x 52*		1320.8		914.4
60 x 48*		1219.2		863.6
60 x 40*		1016.0		863.6
60 x 28*		711.2		863.6
60 x 20*		508.0		863.6
64 x 64*	1626.0	1626.0	1194.0	1092.0
64 x 60*		1524.0		1067.0
64 x 56*		1422.0		1016.0
64 x 52*		1321.0		965.0
64 x 48*		1219.0		914
66 x 66*	1676.4	1676.4	1219.2	1066.8
68 x 68*	1727.0	1727.0	1270.0	1168.0
68 x 64*		1626.0		1143.0
68 x 60*		1524.0		1118.0
68 x 56*		1422.0		1067.0
68 x 52*		1321.0		1016.0
68 x 48*		1219.0		965.0
72 x 72*	1829.0	1829.0	1320.0	1245.0
72 x 68*		1727.0		1219.0
72 x 64*		1626.0		1194.0
72 x 60*		1524.0		1168.0
72 x 56*	1829.0	1422.0	1320.0	1118.0
72 x 52*		1321.0		1067.0
72 x 48*		1219.0		1016.0
76 x 76*	1930.0	1930.0	1422.0	1320.0
76 x 72*		1829.0		1295.0
76 x 68*		1727.0		1270.0
76 x 64*		1626.0		1245.0
76 x 60*		1524.0		1219.0
76 x 56*		1422.0		1168.0
76 x 52*		1321.0		1118.0
76 x 48*		1219.0		1067.0
80 x 80*	2032.0	2032.0	1499.0	1397.0
80 x 76*		1930.0		1372.0
80 x 72*		1829.0		1346.0
80 x 68*		1727.0		1321.0
80 x 64*		1626.0		1295.0
80 x 60*		1524.0		1270.0
80 x 56*		1422.0		1219.0
80 x 52*		1321.0		1168.0
80 x 48*		1219.0		1118.0

ANSI B16.9 / MSS SP-75 Cap Weight and Dimension Chart (mm, kg)

Nominal Pipe Size (NPS)	Outside Diameter at Bevel D	Center to End E
1/2	21.3	25.4
3/4	26.7	25.4
1	33.4	38.1
1-1/4	42.2	38.1
1-1/2	48.3	38.1
2	60.3	38.1
2-1/2	73.0	38.1
3	88.9	50.8
3-1/2	101.6	63.5
4	114.3	63.5
5	141.3	76.2
6	168.3	88.9
8	219.1	101.6
10	273.1	127.0
12	323.9	152.4
14	355.6	165.1
16	406.4	177.8
18	457.2	203.2
20	508.0	228.6
22	558.8	254.0
24	609.6	266.7
26	660.4	266.7
28	711.2	266.7
30	762.0	266.7
32	812.8	266.7
34	863.6	266.7
36	914.4	266.7
38	965.2	304.8
40	1016.0	304.8
42	1066.8	304.8
44	1117.6	342.9
46	1168.4	342.9
48	1219.2	342.9

ANSI B36.19M Wall Thickness Schedule Dimension Chart (mm, kg)

Nominal Pipe Size		Outside Diameter		Nominal Wall Thickness
A	B	JIS	ANSI	Sch 5S	Sch 10S	Sch 20S	GS	Sch 10	LG (7.9)	Sch 20	Sch 30	STD	Sch 40	Sch 60	XS	Sch 80	Sch 100	Sch 120	Sch 140	Sch 160	XXS
8	1/4	13.8	13.7	1.2	1.65	2.0	2.3	-	-	-	-	(2.2)	2.2	2.4	(3.0)	3.0	-	-	-	-	-
10	3/8	17.3	17.1	1.2	1.65	2.0	2.3	-	-	-	-	(2.3)	2.3	2.8	(3.2)	3.2	-	-	-	-	-
15	1/2	21.7	21.3	1.65	2.1	2.5	2.8	-	-	-	-	(2.8)	2.8	3.2	(3.7)	3.7	-	-	-	4.7	7.5
20	3/4	27.2	26.7	1.65	2.1	2.5	2.8	-	-	-	-	(2.9)	2.9	3.4	(3.9)	3.9	-	-	-	5.5	7.8
25	1	34.0	33.4	1.65	2.8	3.0	3.2	-	-	-	-	(3.4)	3.4	3.9	(4.5)	4.5	-	-	-	6.4	9.1
32	1-1/4	42.7	42.2	1.65	2.8	3.0	3.5	-	-	-	-	(3.6)	3.6	4.5	(4.9)	4.9	-	-	-	6.4	9.7
40	1-1/2	48.6	48.3	1.65	2.8	3.0	3.5	-	-	-	-	(3.7)	3.7	4.5	(5.1)	5.1	-	-	-	7.1	10.2
50	2	60.5	60.3	1.65	2.8	3.5	3.8	-	-	-	-	(3.9)	3.9	4.9	(5.5)	5.5	-	-	-	8.7	11.1
65	2-1/2	76.3	73.0	2.1	3.0	3.5	4.2	-	-	-	-	(5.2)	5.2	6.0	(7.0)	7.0	-	-	-	9.5	14.0
80	3	89.1	88.9	2.1	3.0	4.0	4.2	-	-	-	-	(5.5)	5.5	6.6	(7.6)	7.6	-	-	-	11.1	15.2
90	3-1/2	101.6	101.6	2.1	3.0	4.0	4.2	-	-	-	-	(5.7)	5.7	7.0	(8.1)	8.1	-	-	-	12.7	-
100	4	114.3	114.3	2.1	3.0	4.0	4.5	-	-	-	-	(6.0)	6.0	7.1	(8.6)	8.6	-	11.1	-	13.5	17.1
125	5	139.8	141.3	2.8	3.4	5.0	4.5	-	-	-	-	(6.6)	6.6	8.1	(9.5)	9.5	-	12.7	-	15.9	19.0
150	6	165.2	168.3	2.8	3.4	5.0	5.0	-	5.0**	-	-	(7.1)	7.1	9.3	(11.0)	11.0	-	14.3	-	18.2	21.9
175	7	190.7	-	-	-	-	5.3	-	-	-	-	-	-	-	-	-	-	-	-	-	-
200	8	216.3	219.1	2.8	3.8	6.5	5.8	-	5.8**	6.4	7.0	(8.2)	8.2	10.3	(12.7)	12.7	15.1	18.2	20.6	23.0	22.2
225	9	241.8	-	-	-	-	6.2	-	-	-	-	-	-	-	-	-	-	-	-	-	-
250	10	267.4	273.1	3.4	4.2	6.5	6.6	-	6.6**	6.4	7.8	(9.3)	9.3	12.7	12.7	15.1	18.3	21.4	25.4	28.6	25.4
300	12	318.5	323.9	4.0	4.6	6.5	6.9	-	6.9**	6.4	8.4	9.5	10.3	14.3	12.7	17.4	21.4	25.4	28.6	33.3	25.4
350	14	355.6	355.6	4.0	4.8	7.9	7.9	6.4	7.9	7.9	9.5	9.5	11.1	15.1	12.7	19.0	23.8	27.8	31.8	35.7	-
400	16	406.4	406.4	4.2	4.8	7.9	7.9	6.4	7.9	7.9	9.5	9.5	12.7	16.7	12.7	21.4	26.2	30.9	36.5	40.5	-
450	18	457.2	457.2	4.2	4.8	7.9	7.9	6.4	7.9	7.9	11.1	9.5	14.3	19.0	12.7	23.8	29.4	34.9	39.7	45.2	-
500	20	508.0	508.0	4.8	5.5	7.9	7.9	6.4	7.9	9.5	12.7	9.5	15.1	20.6	12.7	26.2	32.5	38.1	44.4	50.0	-
550	22	558.8	558.8	4.8	5.5	-	-	6.4	7.9	9.5	12.7	9.5	-	22.2	12.7	28.6	34.9	41.3	47.6	54.0	-
600	24	609.6	609.6	5.5	6.4	-	-	6.4	7.9	9.5	14.3	9.5	17.5	24.6	12.7	31.0	38.9	46.0	52.4	59.5	-
650	26	660.4	660.4	-	-	-	-	7.9	7.9	12.7	-	9.5	-	-	12.7	-	-	-	-	-	-
700	28	711.2	711.2	-	-	-	-	7.9	7.9	12.7	15.9	9.5	-	-	12.7	-	-	-	-	-	-
750	30	762.0	762.0	6.4	7.9	-	-	7.9	7.9	12.7	15.9	9.5	-	-	12.7	-	-	-	-	-	-
800	32	812.8	812.8	-	-	-	-	7.9	7.9	12.7	15.9	9.5	17.5	-	12.7	-	-	-	-	-	-
850	34	863.6	863.6	-	-	-	-	7.9	7.9	12.7	15.9	9.5	17.5	-	12.7	-	-	-	-	-	-
900	36	914.4	914.4	-	-	-	-	7.9	7.9	12.7	15.9	9.5	19.1	-	12.7	-	-	-	-	-	-
950	38	965.2	965.2	-	-	-	-	-	7.9	12.7	-	9.5	-	-	12.7	-	-	-	-	-	-
1000	40	1016.0	1016.0	-	-	-	-	-	7.9	-	-	9.5	-	-	12.7	-	-	-	-	-	-
1050	42	1066.8	1066.8	-	-	-	-	-	7.9	-	-	9.5	-	-	12.7	-	-	-	-	-	-
1100	44	1117.6	1117.6	-	-	-	-	-	7.9	-	-	9.5	-	-	12.7	-	-	-	-	-	-
1150	46	1168.4	1168.4	-	-	-	-	-	7.9	-	-	9.5	-	-	12.7	-	-	-	-	-	-
1200	48	1219.2	1219.2	-	-	-	-	-	7.9	-	-	9.5	-	-	12.7	-	-	-	-	-	-
1250	50	1270.0	1270.0	-	-	-	-	-	7.9	-	-	9.5	-	-	12.7	-	-	-	-	-	-
1300	52	1320.8	1320.8	-	-	-	-	-	7.9	-	-	9.5	-	-	12.7	-	-	-	-	-	-
1350	54	1371.6	1371.6	-	-	-	-	-	7.9	-	-	9.5	-	-	12.7	-	-	-	-	-	-
1400	56	1422.4	1422.4	-	-	-	-	-	7.9	-	-	9.5	-	-	12.7	-	-	-	-	-	-
1450	58	1473.2	1473.2	-	-	-	-	-	7.9	-	-	9.5	-	-	12.7	-	-	-	-	-	-
1500	60	1524.0	1524.0	-	-	-	-	-	7.9	-	-	9.5	-	-	12.7	-	-	-	-	-	-
1600	64	1626.0
1700	68	1727.0
1800	72	1829.0
1900	76	1932.0
2000	80	2032.0

Dimensions in accordance with JIS G3448, JIS G3455, JIS G3454, JIS G3459, ANSI B36.10M