ASME B16.11-2011 Tantalum Forged Fitting Weight, Dimensions Chart in mm, kg, PDF online
Tantalum forged fittings are pipe fittings that are made of tantalum, a rare metal. Tantalum forged
fittings are created by heating tantalum to a high temperature and then forging it into the desired
shape. This process creates strong, durable fittings that are well-suited for demanding applications.
Tantalum forged fittings are specialized components used in industrial applications where exceptional
corrosion resistance, high-temperature resistance, and purity are required. These forged fittings are
premium-quality fittings which offer high strength, exceptional corrosion resistance, high melting
point, good ductility, high strength and long service life. Tantalum forged fittings are available in
various sizes and dimensions to accommodate different piping configurations and flow requirements.
Common applications include oil and gas pipelines, chemical processing plants, desalination facilities,
and offshore structures. You can find most accurate information on weight and dimensions in mm and kg,
of tantalum forged fittings in the PDF chart given below.
Tantalum Forged Fittings Types
There are two basic types of tantalum forged fittings, namely:
-
Threaded tantalum forged fittings - With threaded tantalum fittings,
pipe and fitting join to each other using threaded sections or parts. Tantalum Forged
Fittings Weight can be measured in kg. One or both components must be
rotated or revolved to engage the threads and fully close any gap between them. The strength of the
joint depends on the strength of the engaged threads. Threaded pipe forged fittings are proper for
applications such as cooling, fire protection and water distribution. If the pipe system manages
fluids with frequently changing temperatures, threaded pipe fittings are not perfect as temperature
change can cause the fitting to crack in the thread forms.
-
Socket weld tantalum forged fittings - With socket weld fittings, the
fitting connects to the pipe with pipe entering a shallow hole in the fitting. The gap is then
closed with a “fillet weld” which involves heating and filler metal to provide a seal, metal is
melted and solidified again to close the gap. Socket weld forged fittings may be called to be more
permanent than threaded forged fittings. The drawback of fittings of this type is the time and hard
efforts for installation. Tantalum Forged Fittings can be measured in Dimensions in mm, kg.
Typical applications for socket weld forged fittings include steam and
other gases, toxic fluids and acids, and explosive liquids and gases where highest connection
strength and leakage prevention is necessary.
Tantalum forged fittings are available in different shapes and sizes including 45-degree elbows,
90-degree elbows, tees, couplings, unions, cross, caps, plugs, bushings, swage nipples, olets, reducers,
nipples and street elbows. Refer tantalum forged fittings weight and dimensions chart PDF for all the
above mentioned forged fittings types.
Tantalum Forged Fittings Specifications
Tantalum forged fittings come in different pressure ratings, ranging from 2000 lbs to 9000 lbs and
higher. Tantalum forged fittings come in a range of sizes to accommodate and work with different pipe
diameters and system requirements. These fittings are manufactured according to various international
standards and specifications to ensure quality and compatibility with piping systems. Common standards
include ASTM A182 for forged fittings and ASME B16.11 for threaded and socket weld fittings. For
detailed specifications, check the tantalum forged fittings weight and dimensions chart PDF in mm and
kg.
ASME B16.11-2011 Threaded Elbow 45° Weight and Dimension Chart (mm, kg)
| DN |
Nom. Pipe Size |
Center to End A |
Outside Diameter Of Band H |
Minimum Wall Thickness G |
Length of Thread(Min) |
| 2M |
3M |
6M |
2M |
3M |
6M |
2M |
3M |
6M |
B(1) |
L2(1) |
| 6 |
1/8” |
17 |
17 |
19 |
22 |
22 |
25 |
3.18 |
3.18 |
6.35 |
6.4 |
6.7 |
| 8 |
1/4” |
17 |
19 |
22 |
22 |
25 |
33 |
3.18 |
3.30 |
6.60 |
8.1 |
10.2 |
| 10 |
3/8” |
19 |
22 |
25 |
25 |
33 |
38 |
3.18 |
3.51 |
6.98 |
9.1 |
10.4 |
| 15 |
1/2” |
22 |
25 |
28 |
33 |
38 |
46 |
3.18 |
4.09 |
8.15 |
10.9 |
13.6 |
| 20 |
3/4” |
25 |
28 |
33 |
38 |
46 |
56 |
3.18 |
4.32 |
8.53 |
12.7 |
13.9 |
| 25 |
1” |
28 |
33 |
35 |
46 |
56 |
62 |
3.68 |
4.98 |
9.93 |
14.7 |
17.3 |
| 32 |
1-1/4” |
33 |
35 |
43 |
56 |
62 |
75 |
3.89 |
5.28 |
10.59 |
17.0 |
18.0 |
| 40 |
1-1/2” |
35 |
43 |
44 |
62 |
75 |
84 |
4.01 |
5.56 |
11.07 |
17.8 |
18.4 |
| 50 |
2” |
43 |
44 |
52 |
75 |
84 |
102 |
4.27 |
7.14 |
12.09 |
19.0 |
19.2 |
| 65 |
2-1/2” |
52 |
52 |
64 |
92 |
102 |
121 |
5.61 |
7.65 |
15.29 |
23.6 |
28.9 |
| 80 |
3” |
64 |
64 |
79 |
109 |
121 |
146 |
5.99 |
8.84 |
16.64 |
25.9 |
30.5 |
| 100 |
4” |
79 |
79 |
79 |
146 |
152 |
152 |
6.55 |
11.18 |
18.67 |
27.7 |
33.0 |
ASME B16.11-2011 Threaded Street Elbow Weight and Dimension Chart (mm, kg)
| DN |
Nom. Pipe Size |
H |
A |
J |
G1(Min) |
G2(1)(Min) |
B(2)(Min) |
L2(2)(Min) |
L (Min) |
| 3M |
6M |
3M |
6M |
3M |
6M |
3M |
6M |
3M |
6M |
| 6 |
1/8” |
19 |
25 |
19 |
22 |
25 |
32 |
3.18 |
5.08 |
2.74 |
4.22 |
6.4 |
6.7 |
10.0 |
| 8 |
1/4” |
25 |
32 |
22 |
25 |
32 |
38 |
3.30 |
5.66 |
3.22 |
5.28 |
8.1 |
10.2 |
11.0 |
| 10 |
3/8” |
32 |
38 |
25 |
28 |
38 |
41 |
3.50 |
6.98 |
3.50 |
5.59 |
9.1 |
10.4 |
13.0 |
| 15 |
1/2” |
38 |
44 |
28 |
35 |
41 |
48 |
4.09 |
8.15 |
4.16 |
6.53 |
10.9 |
13.6 |
14.0 |
| 20 |
3/4” |
44 |
51 |
35 |
44 |
48 |
57 |
4.32 |
8.53 |
4.88 |
6.86 |
12.7 |
13.9 |
16.0 |
| 25 |
1” |
51 |
62 |
44 |
51 |
57 |
66 |
4.98 |
9.93 |
5.56 |
7.95 |
14.7 |
17.3 |
19.0 |
| 32 |
1-1/4” |
62 |
70 |
51 |
54 |
66 |
71 |
5.28 |
10.59 |
5.56 |
8.48 |
17.0 |
18.0 |
21.0 |
| 40 |
1-1/2” |
70 |
84 |
54 |
64 |
71 |
84 |
5.56 |
11.07 |
6.25 |
8.89 |
17.8 |
18.4 |
21.0 |
| 50 |
2” |
84 |
102 |
64 |
83 |
84 |
105 |
7.14 |
12.09 |
7.64 |
9.70 |
19.0 |
19.0 |
22.0 |
ASME B16.11-2011 Threaded Tee Weight and Dimension Chart (mm, kg)
| DN |
Nom. Pipe Size |
Center to End A |
Outside Diameter Of Band H |
Minimum Wall Thickness G |
Length of Thread(Min) |
| 2M |
3M |
6M |
2M |
3M |
6M |
2M |
3M |
6M |
B(1) |
L2(1) |
| 6 |
1/8” |
21 |
21 |
25 |
22 |
22 |
25 |
3.18 |
3.18 |
6.35 |
6.4 |
6.7 |
| 8 |
1/4” |
21 |
25 |
28 |
22 |
25 |
33 |
3.18 |
3.30 |
6.60 |
8.1 |
10.2 |
| 10 |
3/8” |
25 |
28 |
33 |
25 |
33 |
38 |
3.18 |
3.51 |
6.98 |
9.1 |
10.4 |
| 15 |
1/2” |
28 |
33 |
38 |
33 |
38 |
46 |
3.18 |
4.09 |
8.15 |
10.9 |
13.6 |
| 20 |
3/4” |
33 |
38 |
44 |
38 |
46 |
56 |
3.18 |
4.32 |
8.53 |
12.7 |
13.9 |
| 25 |
1” |
38 |
44 |
51 |
46 |
56 |
62 |
3.68 |
4.98 |
9.93 |
14.7 |
17.3 |
| 32 |
1-1/4” |
44 |
51 |
60 |
56 |
62 |
75 |
3.89 |
5.28 |
10.59 |
17.0 |
18.0 |
| 40 |
1-1/2” |
51 |
60 |
64 |
62 |
75 |
84 |
4.01 |
5.56 |
11.07 |
17.8 |
18.4 |
| 50 |
2” |
60 |
64 |
83 |
75 |
84 |
102 |
4.27 |
7.14 |
12.09 |
19.0 |
19.2 |
| 65 |
2-1/2” |
76 |
83 |
95 |
92 |
102 |
121 |
5.61 |
7.65 |
15.29 |
23.6 |
28.9 |
| 80 |
3” |
86 |
95 |
106 |
109 |
121 |
146 |
5.99 |
8.84 |
16.64 |
25.9 |
30.5 |
| 100 |
4” |
106 |
114 |
114 |
146 |
152 |
152 |
6.55 |
11.18 |
18.67 |
27.7 |
33.0 |
ASME B16.11-2011 Threaded 45° Lateral Tee Weight and Dimension Chart (mm, kg)
| Nom. Pipe Size |
A |
E |
G (Min) |
H |
Length of Thread(Min) |
| 2000Lb |
3000Lb |
2000Lb |
3000Lb |
2000Lb |
3000Lb |
2000Lb |
3000Lb |
B(1) |
L2(1) |
| 1/2” |
46 |
55 |
20 |
23 |
3.18 |
4.09 |
33 |
38 |
10.9 |
13.6 |
| 3/4” |
55 |
65 |
23 |
26 |
3.18 |
4.32 |
38 |
46 |
12.7 |
13.9 |
| 1” |
65 |
73 |
26 |
31 |
3.68 |
4.98 |
46 |
56 |
14.7 |
17.3 |
| 1-1/4” |
73 |
82 |
31 |
35 |
3.89 |
5.28 |
56 |
62 |
17.0 |
18.0 |
| 1-1/2” |
82 |
113 |
35 |
42 |
4.01 |
5.56 |
62 |
75 |
17.8 |
18.4 |
| 2” |
113 |
136 |
42 |
56 |
4.27 |
7.14 |
75 |
84 |
19.0 |
19.2 |
| 2-1/2” |
136 |
- |
56 |
- |
5.61 |
- |
92 |
- |
23.6 |
28.9 |
ASME B16.11-2011 Threaded Cross Weight and Dimension Chart (mm, kg)
| DN |
Nom. Pipe Size |
Center to End A |
Outside Diameter Of Band H |
Minimum Wall Thickness G |
Length of Thread(Min) |
| 2M |
3M |
6M |
2M |
3M |
6M |
2M |
3M |
6M |
B(1) |
L2(1) |
| 6 |
1/8” |
21 |
21 |
25 |
22 |
22 |
25 |
3.18 |
3.18 |
6.35 |
6.4 |
6.7 |
| 8 |
1/4” |
21 |
25 |
28 |
22 |
25 |
33 |
3.18 |
3.30 |
6.60 |
8.1 |
10.2 |
| 10 |
3/8” |
25 |
28 |
33 |
25 |
33 |
38 |
3.18 |
3.51 |
6.98 |
9.1 |
10.4 |
| 15 |
1/2” |
28 |
33 |
38 |
33 |
38 |
46 |
3.18 |
4.09 |
8.15 |
10.9 |
13.6 |
| 20 |
3/4” |
33 |
38 |
44 |
38 |
46 |
56 |
3.18 |
4.32 |
8.53 |
12.7 |
13.9 |
| 25 |
1” |
38 |
44 |
51 |
46 |
56 |
62 |
3.68 |
4.98 |
9.93 |
14.7 |
17.3 |
| 32 |
1-1/4” |
44 |
51 |
60 |
56 |
62 |
75 |
3.89 |
5.28 |
10.59 |
17.0 |
18.0 |
| 40 |
1-1/2” |
51 |
60 |
64 |
62 |
75 |
84 |
4.01 |
5.56 |
11.07 |
17.8 |
18.4 |
| 50 |
2” |
60 |
64 |
83 |
75 |
84 |
102 |
4.27 |
7.14 |
12.09 |
19.0 |
19.2 |
| 65 |
2-1/2” |
76 |
83 |
95 |
92 |
102 |
121 |
5.61 |
7.65 |
15.29 |
23.6 |
28.9 |
| 80 |
3” |
86 |
95 |
106 |
109 |
121 |
146 |
5.99 |
8.84 |
16.64 |
25.9 |
30.5 |
| 100 |
4” |
106 |
114 |
114 |
146 |
152 |
152 |
6.55 |
11.18 |
18.67 |
27.7 |
33.0 |
ASME B16.11-2011 Threaded Full Coupling Weight and Dimension Chart (mm, kg)
| DN |
Nom. Pipe Size |
End to End Coupling W |
Outside Diameter D |
Length of Thread (Min) |
| 3000Lb |
6000Lb |
B(1) |
L2(1) |
| 6 |
1/8” |
32 |
16 |
22 |
6.4 |
6.7 |
| 8 |
1/4” |
35 |
19 |
25 |
8.1 |
10.2 |
| 10 |
3/8” |
38 |
22 |
32 |
9.1 |
10.4 |
| 15 |
1/2” |
48 |
28 |
38 |
10.9 |
13.6 |
| 20 |
3/4” |
51 |
35 |
44 |
12.7 |
13.9 |
| 25 |
1” |
60 |
44 |
57 |
14.7 |
17.3 |
| 32 |
1-1/4” |
67 |
57 |
64 |
17.0 |
18.0 |
| 40 |
1-1/2” |
79 |
64 |
76 |
17.8 |
18.4 |
| 50 |
2” |
86 |
76 |
92 |
19.0 |
19.2 |
| 65 |
2-1/2” |
92 |
92 |
108 |
23.6 |
28.9 |
| 80 |
3” |
108 |
108 |
127 |
25.9 |
30.5 |
| 100 |
4” |
121 |
140 |
159 |
27.7 |
33.0 |
ASME B16.11-2011 Threaded Half Coupling Weight and Dimension Chart (mm, kg)
| DN |
Nom. Pipe Size |
End to End Coupling W |
Outside Diameter D |
Length of Thread (Min) |
| 3000Lb |
6000Lb |
B(1) |
L2(1) |
| 6 |
1/8” |
32 |
16 |
22 |
6.4 |
6.7 |
| 8 |
1/4” |
35 |
19 |
25 |
8.1 |
10.2 |
| 10 |
3/8” |
38 |
22 |
32 |
9.1 |
10.4 |
| 15 |
1/2” |
48 |
28 |
38 |
10.9 |
13.6 |
| 20 |
3/4” |
51 |
35 |
44 |
12.7 |
13.9 |
| 25 |
1” |
60 |
44 |
57 |
14.7 |
17.3 |
| 32 |
1-1/4” |
67 |
57 |
64 |
17.0 |
18.0 |
| 40 |
1-1/2” |
79 |
64 |
76 |
17.8 |
18.4 |
| 50 |
2” |
86 |
76 |
92 |
19.0 |
19.2 |
| 65 |
2-1/2” |
92 |
92 |
108 |
23.6 |
28.9 |
| 80 |
3” |
108 |
108 |
127 |
25.9 |
30.5 |
| 100 |
4” |
121 |
140 |
159 |
27.7 |
33.0 |
ASME B16.11-2011 Threaded Reducing Coupling Weight and Dimension Chart (mm, kg)
| Nom. Pipe Size |
D |
W |
L1 |
L2 |
| 3000Lb |
6000Lb |
| 1/4”x1/8” |
19.0 |
25.0 |
35.0 |
11.4 |
8.8 |
| 3/8”x1/8” |
22.0 |
32.0 |
38.0 |
12.4 |
8.8 |
| 3/8”x1/4” |
22.0 |
32.0 |
38.0 |
12.4 |
11.4 |
| 1/2”x1/8” |
28.0 |
38.0 |
48.0 |
14.9 |
8.8 |
| 1/2”x1/4” |
28.0 |
38.0 |
48.0 |
14.9 |
11.4 |
| 1/2”x3/8” |
28.0 |
38.0 |
48.0 |
14.9 |
12.4 |
| 3/4”x1/8” |
35.0 |
44.0 |
51.0 |
16.8 |
8.8 |
| 3/4”x1/4” |
35.0 |
44.0 |
51.0 |
16.8 |
11.4 |
| 3/4”x3/8” |
35.0 |
44.0 |
51.0 |
16.8 |
12.4 |
| 3/4”x1/2” |
35.0 |
44.0 |
51.0 |
16.8 |
14.9 |
| 1”x1/8” |
44.0 |
57.0 |
51.0 |
19.6 |
8.8 |
| 1x1/4” |
44.0 |
57.0 |
60.0 |
19.6 |
11.4 |
| 1”x3/8” |
44.0 |
57.0 |
60.0 |
19.6 |
12.4 |
| 1”x1/2” |
44.0 |
57.0 |
60.0 |
19.6 |
14.9 |
| 1”x3/4” |
44.0 |
57.0 |
60.0 |
19.6 |
16.8 |
| 1-1/4”x1/8” |
57.0 |
64.0 |
67.0 |
21.9 |
8.8 |
| 1-1/4”x1/4” |
57.0 |
64.0 |
67.0 |
21.9 |
11.4 |
| 1-1/4”x3/8” |
57.0 |
64.0 |
67.0 |
21.9 |
12.4 |
| 1-1/4”x1/2” |
57.0 |
64.0 |
67.0 |
21.9 |
14.9 |
| 1-1/4”x3/4” |
57.0 |
64.0 |
67.0 |
21.9 |
16.8 |
| 1-1/4”x1” |
57.0 |
64.0 |
67.0 |
21.9 |
19.6 |
| 1-1/2”x1/8” |
64.0 |
76.0 |
79.0 |
22.7 |
8.8 |
| 1-1/2”x1/4” |
64.0 |
76.0 |
79.0 |
22.7 |
11.4 |
| 1-1/2”x3/8” |
64.0 |
76.0 |
79.0 |
22.7 |
12.4 |
| 1-1/2”x1/2” |
64.0 |
76.0 |
79.0 |
22.7 |
14.9 |
| 1-1/2”x3/4” |
64.0 |
76.0 |
79.0 |
22.7 |
16.8 |
| 1-1/2”x1” |
64.0 |
76.0 |
79.0 |
22.7 |
19.6 |
| 1-1/2”x1-1/4” |
64.0 |
76.0 |
79.0 |
22.7 |
21.9 |
| 2”x1/8” |
76.0 |
92.0 |
86.0 |
23.9 |
8.8 |
| 2”x1/4” |
76.0 |
92.0 |
86.0 |
23.9 |
11.4 |
| 2”x3/8” |
76.0 |
92.0 |
86.0 |
23.9 |
12.4 |
| 2”x1/2” |
76.0 |
92.0 |
86.0 |
23.9 |
14.9 |
| 2”x3/4” |
76.0 |
92.0 |
86.0 |
23.9 |
16.8 |
| 2”x1” |
76.0 |
92.0 |
86.0 |
23.9 |
19.6 |
| 2”x1-1/4” |
76.0 |
92.0 |
86.0 |
23.9 |
21.9 |
| 2”x1-1/2” |
76.0 |
92.0 |
86.0 |
23.9 |
22.7 |
| 2-1/2”x1/8” |
92.0 |
108.0 |
92.0 |
30.5 |
8.8 |
| 2-1/2”x1/4” |
92.0 |
108.0 |
92.0 |
30.5 |
11.4 |
| 2-1/2”x3/8” |
92.0 |
108.0 |
92.0 |
30.5 |
12.4 |
| 2-1/2”x1/2” |
92.0 |
108.0 |
92.0 |
30.5 |
14.9 |
| 2-1/2”x3/4” |
92.0 |
108.0 |
92.0 |
30.5 |
16.8 |
| 2-1/2”x1” |
92.0 |
108.0 |
92.0 |
30.5 |
19.6 |
| 2-1/2”x1-1/4” |
92.0 |
108.0 |
92.0 |
30.5 |
21.9 |
| 2-1/2”x1-1/2” |
92.0 |
108.0 |
92.0 |
30.5 |
22.7 |
| 2-1/2”x2” |
92.0 |
108.0 |
92.0 |
30.5 |
23.9 |
| 3”x1/8” |
108.0 |
127.0 |
108.0 |
32.8 |
8.8 |
| 3”x1/4” |
108.0 |
127.0 |
108.0 |
32.8 |
11.4 |
| 3”x3/8” |
108.0 |
127.0 |
108.0 |
32.8 |
12.4 |
| 3”x1/2” |
108.0 |
127.0 |
108.0 |
32.8 |
14.9 |
| 3”x3/4” |
108.0 |
127.0 |
108.0 |
32.8 |
16.8 |
| 3”x1” |
108.0 |
127.0 |
108.0 |
32.8 |
19.6 |
| 3”x1-1/4” |
108.0 |
127.0 |
108.0 |
32.8 |
21.9 |
| 3”x1-1/2” |
108.0 |
127.0 |
108.0 |
32.8 |
22.7 |
| 3”x2” |
108.0 |
127.0 |
108.0 |
32.8 |
23.9 |
| 3”x2-1/2” |
108.0 |
127.0 |
108.0 |
32.8 |
30.5 |
| 4”x1/8” |
140.0 |
159.0 |
121.0 |
34.6 |
8.8 |
| 4”x1/4” |
140.0 |
159.0 |
121.0 |
34.6 |
11.4 |
| 4”x3/8” |
140.0 |
159.0 |
121.0 |
34.6 |
12.4 |
| 4”x1/2” |
140.0 |
159.0 |
121.0 |
34.6 |
14.9 |
| 4”x3/4” |
140.0 |
159.0 |
121.0 |
34.6 |
16.8 |
| 4”x1” |
140.0 |
159.0 |
121.0 |
34.6 |
19.6 |
| 4”x1-1/4” |
140.0 |
159.0 |
121.0 |
34.6 |
21.9 |
| 4”x1-1/2” |
140.0 |
159.0 |
121.0 |
34.6 |
22.7 |
| 4”x2” |
140.0 |
159.0 |
121.0 |
34.6 |
23.9 |
| 4”x2-1/2” |
140.0 |
159.0 |
121.0 |
34.6 |
30.5 |
| 4”x3” |
140.0 |
159.0 |
121.0 |
34.6 |
32.8 |
ASME B16.11-2011 Threaded Couplet Weight and Dimension Chart (mm, kg)
| DN |
Nom. Pipe Size |
N |
Q |
M |
E |
Length of Thread (Min) |
| 3000Lb |
6000Lb |
B(1) |
L2(1) |
| 8 |
1/4” |
17.5 |
9.5 |
30.2 |
23.8 |
25.4 |
8.1 |
10.2 |
| 10 |
3/8” |
20.7 |
9.5 |
30.2 |
27.0 |
31.8 |
9.1 |
10.4 |
| 15 |
1/2” |
23.8 |
9.5 |
33.4 |
33.4 |
38.1 |
10.9 |
13.6 |
| 20 |
3/4” |
27.0 |
9.5 |
34.9 |
38.1 |
44.5 |
12.7 |
13.9 |
| 25 |
1” |
33.4 |
9.5 |
42.9 |
46.1 |
57.2 |
14.7 |
17.3 |
| 32 |
1-1/4” |
42.9 |
9.5 |
47.6 |
55.6 |
63.5 |
17.0 |
18.0 |
| 40 |
1-1/2” |
49.2 |
9.5 |
50.8 |
63.5 |
76.2 |
17.8 |
18.4 |
| 50 |
2” |
61.9 |
9.5 |
57.2 |
79.4 |
92.1 |
19.0 |
19.2 |
| 65 |
2-1/2” |
73.0 |
9.5 |
63.5 |
92.1 |
108.0 |
23.6 |
28.9 |
| 80 |
3” |
88.9 |
9.5 |
69.9 |
111.1 |
127.0 |
25.9 |
30.5 |
| 100 |
4” |
114.3 |
9.5 |
76.2 |
141.3 |
158.8 |
27.7 |
33.0 |
ASME B16.11-2011 Threaded Cap Weight and Dimension Chart (mm, kg)
| DN |
Nom. Pipe Size |
End to End P
|
Outside Diameter D
|
End Wall Thickness G (Min) |
Length of Thread (Min) |
| 3000Lb |
6000Lb |
3000Lb |
6000Lb |
3000Lb |
6000Lb |
B(1) |
L2(1) |
| 6 |
1/8” |
19 |
- |
16 |
- |
4.8 |
- |
6.4 |
6.7 |
| 8 |
1/4” |
25 |
27 |
19 |
25 |
4.8 |
6.4 |
8.1 |
10.2 |
| 10 |
3/8” |
25 |
27 |
22 |
32 |
4.8 |
6.4 |
9.1 |
10.4 |
| 15 |
1/2” |
32 |
33 |
28 |
38 |
6.4 |
7.9 |
10.9 |
13.6 |
| 20 |
3/4” |
37 |
38 |
35 |
44 |
6.4 |
7.9 |
12.7 |
13.9 |
| 25 |
1” |
41 |
43 |
44 |
57 |
9.7 |
11.2 |
14.7 |
17.3 |
| 32 |
1-1/4” |
44 |
46 |
57 |
64 |
9.7 |
11.2 |
17.0 |
18.0 |
| 40 |
1-1/2” |
44 |
48 |
64 |
76 |
11.2 |
12.7 |
17.8 |
18.4 |
| 50 |
2” |
48 |
51 |
76 |
92 |
12.7 |
15.7 |
19.0 |
19.2 |
| 65 |
2-1/2” |
60 |
64 |
92 |
108 |
15.7 |
19.0 |
23.6 |
28.9 |
| 80 |
3” |
65 |
68 |
108 |
127 |
19.0 |
22.4 |
25.9 |
30.5 |
| 100 |
4” |
68 |
75 |
140 |
159 |
22.4 |
28.4 |
27.7 |
33.0 |
ASME B16.11-2011 Threaded Square Head Plug Weight and Dimension Chart (mm, kg)
| DN |
Nom. Pipe Size |
Length (Min) A |
Height of Square (Min) B |
"Width Flat (Min) C |
| 6 |
1/8” |
10 |
6 |
7.15 |
| 8 |
1/4” |
11 |
6 |
9.55 |
| 10 |
3/8” |
13 |
8 |
11.11 |
| 15 |
1/2” |
14 |
10 |
14.29 |
| 20 |
3/4” |
16 |
11 |
15.88 |
| 25 |
1” |
19 |
13 |
20.64 |
| 32 |
1-1/4” |
21 |
14 |
23.81 |
| 40 |
1-1/2” |
21 |
16 |
28.58 |
| 50 |
2” |
22 |
18 |
33.34 |
| 65 |
2-1/2” |
27 |
19 |
38.10 |
| 80 |
3” |
28 |
21 |
42.86 |
| 100 |
4” |
32 |
25 |
63.50 |
ASME B16.11-2011 Threaded Round Head Plug Weight and Dimension Chart (mm, kg)
| DN |
Nom. Pipe Size |
Diameter of Head (Nom.) E |
Length (Min) D |
| 6 |
1/8” |
10 |
35 |
| 8 |
1/4” |
14 |
41 |
| 10 |
3/8” |
18 |
41 |
| 15 |
1/2” |
21 |
44 |
| 20 |
3/4” |
27 |
44 |
| 25 |
1” |
33 |
51 |
| 32 |
1-1/4” |
43 |
51 |
| 40 |
1-1/2” |
48 |
51 |
| 50 |
2” |
60 |
64 |
| 65 |
2-1/2” |
73 |
70 |
| 80 |
3” |
89 |
70 |
| 100 |
4” |
114 |
76 |
ASME B16.11-2011 Threaded Hex Head Plug Weight and Dimension Chart (mm, kg)
| DN |
Nom. Pipe Size |
Length (Min) A |
Width Flat (Nom.) F |
Hex Height (Min) H |
| 6 |
1/8” |
10 |
11.11 |
6 |
| 8 |
1/4” |
11 |
15.88 |
6 |
| 10 |
3/8” |
13 |
17.46 |
8 |
| 15 |
1/2” |
14 |
22.23 |
8 |
| 20 |
3/4” |
16 |
26.99 |
10 |
| 25 |
1” |
19 |
34.93 |
10 |
| 32 |
1-1/4” |
21 |
44.45 |
14 |
| 40 |
1-1/2” |
21 |
50.80 |
16 |
| 50 |
2” |
22 |
63.50 |
18 |
| 65 |
2-1/2” |
27 |
76.20 |
19 |
| 80 |
3” |
28 |
88.90 |
21 |
| 100 |
4” |
32 |
117.48 |
25 |
ASME B16.11-2011 Threaded Bull Plug Weight and Dimension Chart (mm, kg)
| Nom. Pipe Size |
D |
B |
B1 |
T (Min) |
H |
| Sch40/STD |
Sch80/XS (3M) |
Sch160 (6M) |
XXS |
| 1/8” |
10.3 |
51 |
9.5 |
1.73 |
2.41 |
- |
- |
14 |
| 1/4” |
13.7 |
51 |
11.0 |
2.24 |
3.02 |
- |
- |
14 |
| 3/8” |
17.1 |
57 |
12.5 |
2.31 |
3.20 |
- |
- |
14 |
| 1/2” |
21.3 |
64 |
14.5 |
2.77 |
3.73 |
4.78 |
7.47 |
14 |
| 3/4” |
26.7 |
70 |
16.0 |
2.87 |
3.91 |
5.56 |
7.82 |
18 |
| 1” |
33.4 |
76 |
19.0 |
3.38 |
4.55 |
6.35 |
9.09 |
18 |
| 1-1/4” |
42.2 |
83 |
20.5 |
3.56 |
4.85 |
6.35 |
9.70 |
18 |
| 1-1/2” |
48.3 |
89 |
20.5 |
3.68 |
5.08 |
7.14 |
10.15 |
18 |
| 2” |
60.3 |
102 |
22.0 |
3.91 |
5.54 |
8.74 |
11.07 |
20 |
| 2-1/2” |
73.0 |
127 |
27.0 |
5.16 |
7.01 |
9.53 |
14.02 |
20 |
| 3” |
88.9 |
152 |
28.5 |
5.49 |
7.62 |
11.13 |
15.24 |
20 |
| 4” |
114.3 |
178 |
32.0 |
6.02 |
8.56 |
13.49 |
17.12 |
20 |
1. Wall thickness (T Min.) in accordance with ASME
B36.10M.
2. Dimensions in accordance with MSS SP-95-2006.
ASME B16.11-2011 Threaded Hex Head Bushing Weight and Dimension Chart (mm, kg)
| DN |
Nom. Pipe Size |
Length (Min) A |
Width Flat (Nom.) F |
Hex Height (Min) G |
| 8 |
1/4” |
11 |
15.88 |
3 |
| 10 |
3/8” |
13 |
17.46 |
4 |
| 15 |
1/2” |
14 |
22.23 |
5 |
| 20 |
3/4” |
16 |
26.99 |
6 |
| 25 |
1” |
19 |
34.93 |
6 |
| 32 |
1-1/4” |
21 |
44.45 |
7 |
| 40 |
1-1/2” |
21 |
50.80 |
8 |
| 50 |
2” |
22 |
63.50 |
9 |
| 65 |
2-1/2” |
27 |
76.20 |
10 |
| 80 |
3” |
28 |
88.90 |
10 |
| 100 |
4” |
32 |
117.48 |
13 |
ASME B16.11-2011 Threaded Boss Weight and Dimension Chart (mm, kg)
| DN |
Nom. Pipe Size |
D |
W |
L2 (min) |
| 3000Lb |
3000Lb |
3000Lb |
3000Lb |
3000Lb |
3000Lb |
| 6 |
1/8” |
16.0 |
22.0 |
38.0 |
6.70 |
| 8 |
1/4” |
19.0 |
26.0 |
41.0 |
10.21 |
| 10 |
3/8” |
22.0 |
32.0 |
45.0 |
10.36 |
| 15 |
1/2” |
29.0 |
38.0 |
51.0 |
13.56 |
| 20 |
3/4” |
35.0 |
45.0 |
51.0 |
13.86 |
| 25 |
1” |
45.0 |
60.0 |
51.0 |
17.34 |
| 40 |
1-1/2” |
64.0 |
76.0 |
51.0 |
18.38 |
| 50 |
2” |
76.0 |
95.0 |
51.0 |
19.22 |
Dimensions in accordance with BS3799-1974.
ASME B16.11-2011 Threaded Hex Nipple Bushing Weight and Dimension Chart (mm, kg)
| Nominal Size |
A(min) |
W |
E |
b |
C(min) |
F(min) |
| DN |
Inch |
3000Lb |
6000Lb |
| 6 |
1/8” |
11 |
26 |
10 |
5 |
2 |
6 |
- |
| 8 |
1/4” |
15 |
36 |
15 |
8 |
6 |
6 |
- |
| 8x6 |
1/4”x1/8” |
15 |
31 |
15 |
5 |
2 |
6 |
10 |
| 10 |
3/8” |
18 |
40 |
16 |
11 |
8 |
8 |
- |
| 10x8 |
3/8”x1/4” |
18 |
39 |
16 |
8 |
6 |
8 |
15 |
| 15 |
1/2” |
22 |
48 |
20 |
14 |
11 |
8 |
- |
| 15x10 |
1/2”x3/8” |
22 |
44 |
20 |
11 |
8 |
8 |
16 |
| 15x8 |
1/2”x1/4” |
22 |
43 |
20 |
8 |
6 |
8 |
15 |
| 20 |
3/4” |
27 |
52 |
21 |
19 |
13 |
10 |
- |
| 20x15 |
3/4”x1/2” |
27 |
50 |
21 |
14 |
11 |
9 |
20 |
| 20x10 |
3/4”x3/8” |
27 |
46 |
21 |
11 |
8 |
9 |
16 |
| 25 |
1” |
35 |
60 |
25 |
24 |
17 |
10 |
- |
| 25x20 |
1”x3/4” |
35 |
56 |
25 |
19 |
13 |
10 |
21 |
| 25x15 |
1”x1/2” |
35 |
55 |
25 |
14 |
11 |
10 |
20 |
| 40 |
1-1/2” |
50 |
68 |
26 |
38 |
30 |
16 |
- |
| 40x25 |
1-1/2”x1” |
50 |
67 |
26 |
24 |
17 |
16 |
25 |
| 40x20 |
1-1/2”x3/4” |
50 |
63 |
26 |
19 |
13 |
16 |
21 |
| 40x15 |
1-1/2”x1/2” |
50 |
62 |
26 |
14 |
11 |
16 |
20 |
| 50 |
2” |
62 |
71 |
27 |
49 |
39 |
17 |
- |
| 50x40 |
2”x1-1/2” |
62 |
70 |
27 |
38 |
30 |
17 |
26 |
| 50x25 |
2”x1” |
62 |
70 |
27 |
24 |
17 |
18 |
25 |
| 50x20 |
2”x3/4” |
62 |
65 |
27 |
19 |
13 |
17 |
21 |
| 50x15 |
2”x1/2” |
62 |
65 |
27 |
14 |
11 |
18 |
20 |
Dimensions in accordance with BS3799-1974.
ASTM A733-2016 Threaded Pipe Nipple Bushing Weight and Dimension Chart (mm, kg)
| Nom. Pipe Size |
L |
Plain End Weight (kg/m) |
| Close Nipple |
Short Nipple |
Long Nipple |
Sch40/ST D |
Sch80/XS |
Sch160 |
XXS |
| 1/8” |
3/4” |
1-1/2” |
2”~12” |
0.37 |
0.47 |
- |
- |
| 1/4” |
7/8” |
1-1/2” |
2”~12” |
0.63 |
0.8 |
- |
- |
| 3/8” |
1” |
1-1/2” |
2”~12” |
0.84 |
1.1 |
- |
- |
| 1/2” |
1-1/8” |
1-1/2” |
2”~12” |
1.27 |
1.62 |
1.95 |
2.55 |
| 3/4” |
1-3/8” |
2” |
2-1/2”~12” |
1.69 |
2.2 |
2.9 |
3.64 |
| 1” |
1-1/2” |
2” |
2-1/2”~12” |
2.5 |
3.24 |
4.24 |
5.45 |
| 1-1/4” |
1-5/8” |
2-1/2” |
3”~12” |
3.39 |
4.47 |
5.61 |
7.77 |
| 1-1/2” |
1-3/4” |
2-1/2” |
3”~12” |
4.05 |
5.41 |
7.25 |
9.55 |
| 2” |
2” |
2-1/2” |
3”~12” |
5.44 |
7.48 |
11.11 |
13.44 |
| 2-1/2” |
2-1/2” |
3” |
3-1/2”~12” |
8.63 |
11.41 |
14.92 |
20.39 |
| 3” |
2-5/8” |
3” |
3-1/2”~12” |
11.29 |
15.27 |
21.35 |
27.68 |
| 3-1/2” |
2-3/4” |
4” |
4-1/2”~12” |
13.57 |
18.64 |
- |
- |
| 4” |
2-7/8” |
4” |
4-1/2”~12” |
16.08 |
22.32 |
33.54 |
41.03 |
| 5” |
3” |
4-1/2” |
5”~12” |
21.77 |
30.97 |
49.12 |
57.43 |
| 6” |
3-1/8” |
4-1/2” |
5”~12” |
28.26 |
42.56 |
67.57 |
79.22 |
Weld bevel in accordance with ASME B16.25.
ASME B16.11-2011 Threaded Union (3000Lb) Weight and Dimension Chart (mm, kg)
| Nom. Pipe Size |
Pipe End (Min) A |
Wall (Min) C |
Water Way Bore D(1) |
Male Flange (Min) F |
Nut (Min) G |
Threads Per 25.4mmH |
Bearing (Min) J |
Length Assem. Nom. L |
Clear Assem. Nut N |
| 1/8” |
14.7 |
2.41 |
"8.43
6.43" |
3.18 |
3.18 |
16 |
1.24 |
41.4 |
50.8 |
| 1/4” |
19.0 |
3.02 |
"11.13
9.45" |
3.18 |
3.18 |
16 |
1.24 |
41.4 |
50.8 |
| 3/8” |
22.9 |
3.20 |
"14.27
13.51" |
3.43 |
3.43 |
14 |
1.37 |
46.0 |
55.9 |
| 1/2” |
27.7 |
3.73 |
"17.86
17.07" |
3.68 |
3.68 |
14 |
1.50 |
49.0 |
58.4 |
| 3/4” |
33.5 |
3.91 |
"23.01
21.39" |
4.06 |
4.06 |
11 |
1.68 |
56.9 |
66.0 |
| 1” |
41.4 |
4.55 |
"28.98
27.74" |
4.57 |
4.45 |
11 |
1.85 |
62.0 |
78.7 |
| 1-1/4” |
50.5 |
4.85 |
"37.69
35.36" |
5.33 |
5.21 |
11 |
2.13 |
71.1 |
94.0 |
| 1-1/2” |
57.2 |
5.08 |
"43.54
41.20" |
5.84 |
5.59 |
10 |
2.31 |
76.5 |
111.8 |
| 2” |
70.1 |
5.54 |
"55.58
52.12" |
6.60 |
6.35 |
10 |
2.69 |
86.1 |
132.1 |
| 2-1/2” |
85.3 |
7.01 |
"66.27
64.31" |
7.49 |
7.11 |
8 |
3.07 |
102.4 |
149.9 |
| 3” |
102.4 |
7.62 |
"88.25
77.27" |
8.26 |
8.00 |
8 |
3.53 |
109.0 |
175.3 |
Dimensions in accordance with MSS SP-83-2014.
ASME B16.11-2011 Threaded Union (6000Lb) Weight and Dimension Chart (mm, kg)
| Nom. Pipe Size |
Pipe End (Min) A |
Wall (Min) C |
Water Way Bore D(1) |
Male Flange (Min) F |
Nut (Min) G |
Threads Per 25.4mmH |
Bearing (Min) J |
Length Assem. Nom. L |
Clear Assem. Nut N |
| 1/8” |
16.5 |
3.15 |
"8.43
3.20" |
3.18 |
3.18 |
16 |
1.24 |
41.4 |
50.8 |
| 1/4” |
21.1 |
3.68 |
"11.13
5.59" |
3.43 |
3.43 |
14 |
1.37 |
46.0 |
55.9 |
| 3/8” |
25.1 |
4.01 |
"14.27
8.36" |
3.68 |
3.68 |
14 |
1.50 |
49.0 |
58.4 |
| 1/2” |
31.0 |
4.78 |
"17.86
11.02" |
4.06 |
4.06 |
11 |
1.68 |
56.9 |
66.0 |
| 3/4” |
37.8 |
5.56 |
"23.01
14.78" |
4.57 |
4.45 |
11 |
1.85 |
62.0 |
78.7 |
| 1” |
46.2 |
6.35 |
"28.98
19.94" |
5.33 |
5.21 |
10 |
2.13 |
71.1 |
94.0 |
| 1-1/4” |
54.9 |
6.35 |
"37.69
28.70" |
5.84 |
5.59 |
10 |
2.31 |
76.5 |
111.8 |
| 1-1/2” |
62.5 |
7.14 |
"43.54
33.22" |
6.60 |
6.35 |
10 |
2.69 |
86.1 |
132.1 |
| 2” |
77.7 |
8.74 |
"55.58 |
| 42.09" |
7.49 |
7.11 |
8 |
3.07 |
102.4 |
149.9 |
| 2-1/2” |
92.2 |
9.53 |
"66.27
53.21" |
8.26 |
8.00 |
8 |
3.53 |
109.0 |
175.3 |
| 3” |
111.3 |
11.13 |
"82.55
65.89" |
10.19 |
10.19 |
8 |
4.06 |
158 (2) |
200.7 |
1. This length 158mm is by our standard and the length
as per MSS SP-83-2014 is 190.5mm.
2. Dimensions in accordance with MSS SP-83-2014.
ASME B16.11-2011 Threaded Adapter (3000Lb) Weight and Dimension Chart (mm, kg)
| DN |
Nom Pipe Size |
D |
L |
Threaded Size B |
| 8 |
1/4” |
19 |
33 |
1/8” |
| 10 |
3/8” |
22 |
35 |
1/4” |
| 15 |
1/2” |
28 |
42 |
3/8” |
| 20 |
3/4” |
35 |
47 |
1/2” |
| 25 |
1” |
44 |
55 |
3/4” |
| 32 |
1-1/4” |
57 |
63 |
1” |
| 40 |
1-1/2” |
64 |
66 |
1-1/4” |
| 50 |
2” |
76 |
76 |
1-1/2” |
| 65 |
2-1/2” |
92 |
90 |
2” |
| 80 |
3” |
108 |
110 |
2-1/2” |
| 100 |
4” |
140 |
120 |
3” |
ASME B16.11-2011 Threaded 90° Elbow Outlet Weight and Dimension Chart (mm, kg)
| Outlet Pipe |
A |
C |
F |
| DN |
Inch |
3000Lb |
6000Lb |
3000Lb |
6000Lb |
3000Lb |
6000Lb |
| 8 |
1/4” |
40.5 |
40.5 |
35.2 |
34.9 |
22.0 |
26.0 |
| 10 |
3/8” |
40.5 |
40.5 |
35.2 |
34.9 |
25.9 |
33.0 |
| 15 |
1/2” |
40.5 |
47.6 |
35.2 |
34.9 |
31.4 |
38.0 |
| 20 |
3/4” |
47.6 |
55.6 |
43.6 |
43.6 |
37.1 |
44.0 |
| 25 |
1” |
55.6 |
60.3 |
54.0 |
54.0 |
45.5 |
57.0 |
| 32 |
1-1/4” |
60.3 |
66.7 |
67.5 |
67.5 |
57.0 |
64.0 |
| 40 |
1-1/2” |
66.7 |
85.7 |
76.2 |
76.2 |
64.0 |
76.0 |
| 50 |
2” |
81.0 |
- |
104.8 |
- |
76.0 |
- |
| 65 |
2-1/2” |
82.6 |
- |
106.4 |
- |
92.0 |
- |
| 80 |
3” |
96.8 |
- |
125.4 |
- |
109.2 |
- |
| 100 |
4” |
114.3 |
- |
163.5 |
- |
140.0 |
- |
ASME B16.11-2011 Socket Weld 90° Elbow Weight and Dimension Chart (mm, kg)
| DN |
Nom Pipe Size |
A |
B |
D |
C (1) |
G(min) |
J(min) |
| 3M |
6M |
9M |
3M |
6M |
9M |
3M |
6M |
9M |
3M |
6M |
9M |
| Avg |
Min |
Avg |
Min |
Avg |
Min |
| 6 |
1/8” |
11.0 |
11.0 |
- |
10.8 |
6.9 |
4.0 |
- |
3.18 |
3.18 |
3.96 |
3.43 |
- |
- |
2.41 |
3.15 |
- |
9.5 |
| 8 |
1/4” |
11.0 |
13.5 |
- |
14.2 |
9.3 |
6.4 |
- |
3.78 |
3.30 |
4.60 |
4.01 |
- |
- |
3.02 |
3.68 |
- |
9.5 |
| 10 |
3/8” |
13.5 |
15.5 |
- |
17.6 |
12.6 |
9.2 |
- |
4.01 |
3.50 |
5.03 |
4.37 |
- |
- |
3.20 |
4.01 |
- |
9.5 |
| 15 |
1/2” |
15.5 |
19.0 |
25.5 |
21.8 |
15.8 |
11.8 |
6.4 |
4.67 |
4.09 |
5.97 |
5.18 |
9.35 |
8.18 |
3.73 |
4.78 |
7.47 |
9.5 |
| 20 |
3/4” |
19.0 |
22.5 |
28.5 |
27.2 |
21.0 |
15.6 |
11.1 |
4.90 |
4.27 |
6.96 |
6.04 |
9.78 |
8.56 |
3.91 |
5.56 |
7.82 |
12.5 |
| 25 |
1” |
22.5 |
27.0 |
32.0 |
33.9 |
26.7 |
20.7 |
15.2 |
5.69 |
4.98 |
7.92 |
6.93 |
11.38 |
9.96 |
4.55 |
6.35 |
9.09 |
12.5 |
| 32 |
1-1/4” |
27.0 |
32.0 |
35.0 |
42.7 |
35.1 |
29.5 |
22.8 |
6.07 |
5.28 |
7.92 |
6.93 |
12.14 |
10.62 |
4.85 |
6.35 |
9.70 |
12.5 |
| 40 |
1-1/2” |
32.0 |
38.0 |
38.0 |
48.8 |
40.9 |
34.0 |
28.0 |
6.35 |
5.54 |
8.92 |
7.80 |
12.70 |
11.12 |
5.08 |
7.14 |
10.15 |
12.5 |
| 50 |
2” |
38.0 |
41.0 |
54.0 |
61.2 |
52.5 |
42.9 |
38.2 |
6.93 |
6.04 |
10.92 |
9.50 |
13.84 |
12.12 |
5.54 |
8.74 |
11.07 |
16.0 |
| 65 |
2-1/2” |
41.0 |
- |
- |
73.9 |
62.7 |
- |
- |
8.76 |
7.67 |
- |
- |
- |
- |
7.01 |
- |
- |
16.0 |
| 80 |
3” |
57.0 |
- |
- |
89.8 |
78.0 |
- |
- |
9.52 |
8.30 |
- |
- |
- |
- |
7.62 |
- |
- |
16.0 |
| 100 |
4” |
66.5 |
- |
- |
115.2 |
102.3 |
- |
- |
10.69 |
9.35 |
- |
- |
- |
- |
8.56 |
- |
- |
19.0 |
ASME B16.11-2011 Socket Weld 45° Elbow Weight and Dimension Chart (mm, kg)
| DN |
Nom Pipe Size |
A |
B |
D |
C (1) |
G(min) |
J(min) |
| 3M |
6M |
9M |
3M |
6M |
9M |
3M |
6M |
9M |
3M |
6M |
9M |
| Avg |
Min |
Avg |
Min |
Avg |
Min |
| 6 |
1/8” |
11.0 |
11.0 |
- |
10.8 |
6.9 |
4.0 |
- |
3.18 |
3.18 |
3.96 |
3.43 |
- |
- |
2.41 |
3.15 |
- |
9.5 |
| 8 |
1/4” |
11.0 |
13.5 |
- |
14.2 |
9.3 |
6.4 |
- |
3.78 |
3.30 |
4.60 |
4.01 |
- |
- |
3.02 |
3.68 |
- |
9.5 |
| 10 |
3/8” |
13.5 |
15.5 |
- |
17.6 |
12.6 |
9.2 |
- |
4.01 |
3.50 |
5.03 |
4.37 |
- |
- |
3.20 |
4.01 |
- |
9.5 |
| 15 |
1/2” |
15.5 |
19.0 |
25.5 |
21.8 |
15.8 |
11.8 |
6.4 |
4.67 |
4.09 |
5.97 |
5.18 |
9.35 |
8.18 |
3.73 |
4.78 |
7.47 |
9.5 |
| 20 |
3/4” |
19.0 |
22.5 |
28.5 |
27.2 |
21.0 |
15.6 |
11.1 |
4.90 |
4.27 |
6.96 |
6.04 |
9.78 |
8.56 |
3.91 |
5.56 |
7.82 |
12.5 |
| 25 |
1” |
22.5 |
27.0 |
32.0 |
33.9 |
26.7 |
20.7 |
15.2 |
5.69 |
4.98 |
7.92 |
6.93 |
11.38 |
9.96 |
4.55 |
6.35 |
9.09 |
12.5 |
| 32 |
1-1/4” |
27.0 |
32.0 |
35.0 |
42.7 |
35.1 |
29.5 |
22.8 |
6.07 |
5.28 |
7.92 |
6.93 |
12.14 |
10.62 |
4.85 |
6.35 |
9.70 |
12.5 |
| 40 |
1-1/2” |
32.0 |
38.0 |
38.0 |
48.8 |
40.9 |
34.0 |
28.0 |
6.35 |
5.54 |
8.92 |
7.80 |
12.70 |
11.12 |
5.08 |
7.14 |
10.15 |
12.5 |
| 50 |
2” |
38.0 |
41.0 |
54.0 |
61.2 |
52.5 |
42.9 |
38.2 |
6.93 |
6.04 |
10.92 |
9.50 |
13.84 |
12.12 |
5.54 |
8.74 |
11.07 |
16.0 |
| 65 |
2-1/2” |
41.0 |
- |
- |
73.9 |
62.7 |
- |
- |
8.76 |
7.67 |
- |
- |
- |
- |
7.01 |
- |
- |
16.0 |
| 80 |
3” |
57.0 |
- |
- |
89.8 |
78.0 |
- |
- |
9.52 |
8.30 |
- |
- |
- |
- |
7.62 |
- |
- |
16.0 |
| 100 |
4” |
66.5 |
- |
- |
115.2 |
102.3 |
- |
- |
10.69 |
9.35 |
- |
- |
- |
- |
8.56 |
- |
- |
19.0 |
ASME B16.11-2011 Socket Weld Tee Weight and Dimension Chart (mm, kg)
| DN |
Nom Pipe Size |
A |
B |
D |
C (1) |
G(min) |
J(min) |
| 3M |
6M |
9M |
3M |
6M |
9M |
3M |
6M |
9M |
3M |
6M |
9M |
| Avg |
Min |
Avg |
Min |
Avg |
Min |
| 6 |
1/8” |
11.0 |
11.0 |
- |
10.8 |
6.9 |
4.0 |
- |
3.18 |
3.18 |
3.96 |
3.43 |
- |
- |
2.41 |
3.15 |
- |
9.5 |
| 8 |
1/4” |
11.0 |
13.5 |
- |
14.2 |
9.3 |
6.4 |
- |
3.78 |
3.30 |
4.60 |
4.01 |
- |
- |
3.02 |
3.68 |
- |
9.5 |
| 10 |
3/8” |
13.5 |
15.5 |
- |
17.6 |
12.6 |
9.2 |
- |
4.01 |
3.50 |
5.03 |
4.37 |
- |
- |
3.20 |
4.01 |
- |
9.5 |
| 15 |
1/2” |
15.5 |
19.0 |
25.5 |
21.8 |
15.8 |
11.8 |
6.4 |
4.67 |
4.09 |
5.97 |
5.18 |
9.35 |
8.18 |
3.73 |
4.78 |
7.47 |
9.5 |
| 20 |
3/4” |
19.0 |
22.5 |
28.5 |
27.2 |
21.0 |
15.6 |
11.1 |
4.90 |
4.27 |
6.96 |
6.04 |
9.78 |
8.56 |
3.91 |
5.56 |
7.82 |
12.5 |
| 25 |
1” |
22.5 |
27.0 |
32.0 |
33.9 |
26.7 |
20.7 |
15.2 |
5.69 |
4.98 |
7.92 |
6.93 |
11.38 |
9.96 |
4.55 |
6.35 |
9.09 |
12.5 |
| 32 |
1-1/4” |
27.0 |
32.0 |
35.0 |
42.7 |
35.1 |
29.5 |
22.8 |
6.07 |
5.28 |
7.92 |
6.93 |
12.14 |
10.62 |
4.85 |
6.35 |
9.70 |
12.5 |
| 40 |
1-1/2” |
32.0 |
38.0 |
38.0 |
48.8 |
40.9 |
34.0 |
28.0 |
6.35 |
5.54 |
8.92 |
7.80 |
12.70 |
11.12 |
5.08 |
7.14 |
10.15 |
12.5 |
| 50 |
2” |
38.0 |
41.0 |
54.0 |
61.2 |
52.5 |
42.9 |
38.2 |
6.93 |
6.04 |
10.92 |
9.50 |
13.84 |
12.12 |
5.54 |
8.74 |
11.07 |
16.0 |
| 65 |
2-1/2” |
41.0 |
- |
- |
73.9 |
62.7 |
- |
- |
8.76 |
7.67 |
- |
- |
- |
- |
7.01 |
- |
- |
16.0 |
| 80 |
3” |
57.0 |
- |
- |
89.8 |
78.0 |
- |
- |
9.52 |
8.30 |
- |
- |
- |
- |
7.62 |
- |
- |
16.0 |
| 100 |
4” |
66.5 |
- |
- |
115.2 |
102.3 |
- |
- |
10.69 |
9.35 |
- |
- |
- |
- |
8.56 |
- |
- |
19.0 |
ASME B16.11-2011 Socket Weld 45° Lateral Tee Weight and Dimension Chart (mm, kg)
| DN |
Nom. Pipe Size |
B |
C(1) |
D(1) |
A |
E |
G(1) (Min) |
J(1) (Min) |
| 3M |
3M |
3M |
6M |
3M |
6M |
3M |
6M |
3M |
6M |
| Avg |
Min |
Avg |
Min |
| 15 |
1/2” |
21.8 |
4.67 |
5.97 |
4.09 |
5.18 |
15.8 |
11.8 |
35 |
41 |
9 |
9 |
3.75 |
4.78 |
9.5 |
| 20 |
3/4” |
27.2 |
4.90 |
6.96 |
4.27 |
6.04 |
21.0 |
15.6 |
41 |
51 |
9 |
12 |
3.95 |
5.56 |
12.5 |
| 25 |
1” |
33.9 |
5.69 |
7.92 |
4.98 |
6.93 |
26.7 |
20.7 |
51 |
59 |
12 |
17 |
4.55 |
6.35 |
12.5 |
| 32 |
1-1/4” |
42.7 |
6.07 |
7.92 |
5.28 |
6.93 |
35.1 |
29.5 |
59 |
68 |
17 |
21 |
4.85 |
6.35 |
12.5 |
| 40 |
1-1/2” |
48.8 |
6.35 |
8.92 |
5.54 |
7.80 |
40.9 |
34.0 |
68 |
95 |
21 |
24 |
5.10 |
7.14 |
12.5 |
| 50 |
2” |
61.2 |
6.93 |
10.92 |
6.04 |
9.50 |
52.5 |
42.9 |
95 |
106 |
24 |
31 |
5.55 |
8.74 |
16.0 |
| 65 |
2-1/2” |
73.9 |
8.76 |
- |
7.67 |
- |
62.7 |
- |
118 |
- |
38 |
- |
7.05 |
- |
16.0 |
ASME B16.11-2011 Socket Weld Cross Weight and Dimension Chart (mm, kg)
| DN |
Nom Pipe Size |
A |
B |
D |
C (1) |
G(min) |
J(min) |
| 3M |
6M |
9M |
3M |
6M |
9M |
3M |
6M |
9M |
3M |
6M |
9M |
| Avg |
Min |
Avg |
Min |
Avg |
Min |
| 6 |
1/8” |
11.0 |
11.0 |
- |
10.8 |
6.9 |
4.0 |
- |
3.18 |
3.18 |
3.96 |
3.43 |
- |
- |
2.41 |
3.15 |
- |
9.5 |
| 8 |
1/4” |
11.0 |
13.5 |
- |
14.2 |
9.3 |
6.4 |
- |
3.78 |
3.30 |
4.60 |
4.01 |
- |
- |
3.02 |
3.68 |
- |
9.5 |
| 10 |
3/8” |
13.5 |
15.5 |
- |
17.6 |
12.6 |
9.2 |
- |
4.01 |
3.50 |
5.03 |
4.37 |
- |
- |
3.20 |
4.01 |
- |
9.5 |
| 15 |
1/2” |
15.5 |
19.0 |
25.5 |
21.8 |
15.8 |
11.8 |
6.4 |
4.67 |
4.09 |
5.97 |
5.18 |
9.35 |
8.18 |
3.73 |
4.78 |
7.47 |
9.5 |
| 20 |
3/4” |
19.0 |
22.5 |
28.5 |
27.2 |
21.0 |
15.6 |
11.1 |
4.90 |
4.27 |
6.96 |
6.04 |
9.78 |
8.56 |
3.91 |
5.56 |
7.82 |
12.5 |
| 25 |
1” |
22.5 |
27.0 |
32.0 |
33.9 |
26.7 |
20.7 |
15.2 |
5.69 |
4.98 |
7.92 |
6.93 |
11.38 |
9.96 |
4.55 |
6.35 |
9.09 |
12.5 |
| 32 |
1-1/4” |
27.0 |
32.0 |
35.0 |
42.7 |
35.1 |
29.5 |
22.8 |
6.07 |
5.28 |
7.92 |
6.93 |
12.14 |
10.62 |
4.85 |
6.35 |
9.70 |
12.5 |
| 40 |
1-1/2” |
32.0 |
38.0 |
38.0 |
48.8 |
40.9 |
34.0 |
28.0 |
6.35 |
5.54 |
8.92 |
7.80 |
12.70 |
11.12 |
5.08 |
7.14 |
10.15 |
12.5 |
| 50 |
2” |
38.0 |
41.0 |
54.0 |
61.2 |
52.5 |
42.9 |
38.2 |
6.93 |
6.04 |
10.92 |
9.50 |
13.84 |
12.12 |
5.54 |
8.74 |
11.07 |
16.0 |
| 65 |
2-1/2” |
41.0 |
- |
- |
73.9 |
62.7 |
- |
- |
8.76 |
7.67 |
- |
- |
- |
- |
7.01 |
- |
- |
16.0 |
| 80 |
3” |
57.0 |
- |
- |
89.8 |
78.0 |
- |
- |
9.52 |
8.30 |
- |
- |
- |
- |
7.62 |
- |
- |
16.0 |
| 100 |
4” |
66.5 |
- |
- |
115.2 |
102.3 |
- |
- |
10.69 |
9.35 |
- |
- |
- |
- |
8.56 |
- |
- |
19.0 |
ASME B16.11-2011 Socket Weld Full Coupling Weight and Dimension Chart (mm, kg)
| DN |
Nom. Pipe Size |
Socket Bore Dia. B |
Bore Dia. Of Fitting D |
Socket Wall Thickness C1 |
Laying Length E |
Depth of Socket (Min) J |
| 3M |
6M |
9M |
| 3M |
6M |
9M |
Avg |
Min |
Avg |
Min |
Avg |
Min |
| 6 |
1/8” |
10.8 |
6.9 |
4.0 |
- |
3.18 |
3.18 |
3.96 |
3.43 |
- |
- |
6.5 |
9.5 |
| 8 |
1/4” |
14.2 |
9.3 |
6.4 |
- |
3.78 |
3.30 |
4.60 |
4.01 |
- |
- |
6.5 |
9.5 |
| 10 |
3/8” |
17.6 |
12.6 |
9.2 |
- |
4.01 |
3.50 |
5.03 |
4.37 |
- |
- |
6.5 |
9.5 |
| 15 |
1/2” |
21.8 |
15.8 |
11.8 |
6.4 |
4.67 |
4.09 |
5.97 |
5.18 |
9.35 |
8.18 |
9.5 |
9.5 |
| 20 |
3/4” |
27.2 |
21.0 |
15.6 |
11.1 |
4.90 |
4.27 |
6.96 |
6.04 |
9.78 |
8.56 |
9.5 |
12.5 |
| 25 |
1” |
33.9 |
26.7 |
20.7 |
15.2 |
5.69 |
4.98 |
7.92 |
6.93 |
11.38 |
9.96 |
12.5 |
12.5 |
| 32 |
1-1/4” |
42.7 |
35.1 |
29.5 |
22.8 |
6.07 |
5.28 |
7.92 |
6.93 |
12.14 |
10.62 |
12.5 |
12.5 |
| 40 |
1-1/2” |
48.8 |
40.9 |
34.0 |
28.0 |
6.35 |
5.54 |
8.92 |
7.80 |
12.70 |
11.12 |
12.5 |
12.5 |
| 50 |
2” |
61.2 |
52.5 |
42.9 |
38.2 |
6.93 |
6.04 |
10.92 |
9.50 |
13.84 |
12.12 |
19.0 |
16.0 |
| 65 |
2-1/2” |
73.9 |
62.7 |
- |
- |
8.76 |
7.67 |
- |
- |
- |
- |
19.0 |
16.0 |
| 80 |
3” |
89.8 |
78.0 |
- |
- |
9.52 |
8.30 |
- |
- |
- |
- |
19.0 |
16.0 |
| 100 |
4” |
115.2 |
102.3 |
- |
- |
10.69 |
9.35 |
- |
- |
- |
- |
19.0 |
19.0 |
ASME B16.11-2011 Socket Weld Half Coupling Weight and Dimension Chart (mm, kg)
| DN |
Nom. Pipe Size |
Socket Bore Dia. B |
Bore Dia. Of Fitting D |
Socket Wall Thickness C1 |
Laying Length E |
Depth of Socket (Min) J |
| 3M |
6M |
9M |
| 3M |
6M |
9M |
Avg |
Min |
Avg |
Min |
Avg |
Min |
| 6 |
1/8” |
10.8 |
6.9 |
4.0 |
- |
3.18 |
3.18 |
3.96 |
3.43 |
- |
- |
16.0 |
9.5 |
| 8 |
1/4” |
14.2 |
9.3 |
6.4 |
- |
3.78 |
3.30 |
4.60 |
4.01 |
- |
- |
16.0 |
9.5 |
| 10 |
3/8” |
17.6 |
12.6 |
9.2 |
- |
4.01 |
3.50 |
5.03 |
4.37 |
- |
- |
17.5 |
9.5 |
| 15 |
1/2” |
21.8 |
15.8 |
11.8 |
6.4 |
4.67 |
4.09 |
5.97 |
5.18 |
9.35 |
8.18 |
22.5 |
9.5 |
| 20 |
3/4” |
27.2 |
21.0 |
15.6 |
11.1 |
4.90 |
4.27 |
6.96 |
6.04 |
9.78 |
8.56 |
24.0 |
12.5 |
| 25 |
1” |
33.9 |
26.7 |
20.7 |
15.2 |
5.69 |
4.98 |
7.92 |
6.93 |
11.38 |
9.96 |
28.5 |
12.5 |
| 32 |
1-1/4” |
42.7 |
35.1 |
29.5 |
22.8 |
6.07 |
5.28 |
7.92 |
6.93 |
12.14 |
10.62 |
30.0 |
12.5 |
| 40 |
1-1/2” |
48.8 |
40.9 |
34.0 |
28.0 |
6.35 |
5.54 |
8.92 |
7.80 |
12.70 |
11.12 |
32.0 |
12.5 |
| 50 |
2” |
61.2 |
52.5 |
42.9 |
38.2 |
6.93 |
6.04 |
10.92 |
9.50 |
13.84 |
12.12 |
41.0 |
16.0 |
| 65 |
2-1/2” |
73.9 |
62.7 |
- |
- |
8.76 |
7.67 |
- |
- |
- |
- |
43.0 |
16.0 |
| 80 |
3” |
89.8 |
78.0 |
- |
- |
9.52 |
8.30 |
- |
- |
- |
- |
44.5 |
16.0 |
| 100 |
4” |
115.2 |
102.3 |
- |
- |
10.69 |
9.35 |
- |
- |
- |
- |
48.0 |
19.0 |
ASME B16.11-2011 Socket Weld Reducing Coupling Weight and Dimension Chart (mm, kg)
| Nom. Pipe Size |
H |
B1 |
B2 |
D |
J |
L |
| 3M |
6M |
3M |
6M |
3M |
6M |
3M |
6M |
| 1/4”x1/8” |
22.2 |
23.8 |
14.3 |
10.9 |
6.9 |
4.0 |
10.5 |
10.5 |
27.5 |
27.5 |
| 3/8”x1/8” |
26.1 |
28.1 |
17.7 |
10.9 |
6.9 |
4.0 |
10.5 |
10.5 |
28.5 |
28.5 |
| 3/8”x1/4” |
26.1 |
28.1 |
17.7 |
14.3 |
9.3 |
6.4 |
10.5 |
10.5 |
28.5 |
28.5 |
| 1/2”x1/8” |
31.6 |
34.2 |
21.9 |
10.9 |
6.9 |
4.0 |
12.5 |
12.5 |
34.5 |
34.5 |
| 1/2”x1/4” |
31.6 |
34.2 |
21.9 |
13.3 |
9.3 |
6.4 |
12.5 |
12.5 |
34.5 |
34.5 |
| 1/2”x3/8” |
31.6 |
34.2 |
21.9 |
17.7 |
12.6 |
9.2 |
12.5 |
12.5 |
34.5 |
34.5 |
| 3/4”x1/8” |
37.4 |
41.6 |
27.3 |
10.9 |
6.9 |
4.0 |
14.0 |
14.0 |
37.5 |
37.5 |
| 3/4”x1/4” |
37.4 |
41.6 |
27.3 |
14.3 |
9.3 |
6.4 |
14.0 |
14.0 |
37.5 |
37.5 |
| 3/4”x3/8” |
37.4 |
41.6 |
27.3 |
17.7 |
12.6 |
9.2 |
14.0 |
14.0 |
37.5 |
37.5 |
| 3/4”x1/2” |
37.4 |
41.6 |
27.3 |
21.9 |
15.8 |
11.8 |
14.0 |
14.0 |
37.5 |
37.5 |
| 1”x1/8” |
45.7 |
50.2 |
34.0 |
10.9 |
6.9 |
4.0 |
15.0 |
15.0 |
43.0 |
43.0 |
| 1x1/4” |
45.7 |
50.2 |
34.0 |
14.3 |
9.3 |
6.4 |
15.0 |
15.0 |
43.0 |
43.0 |
| 1”x3/8” |
45.7 |
50.2 |
34.0 |
17.7 |
12.6 |
9.2 |
15.0 |
15.0 |
43.0 |
43.0 |
| 1”x1/2” |
45.7 |
50.2 |
34.0 |
21.9 |
15.8 |
11.8 |
15.0 |
15.0 |
43.0 |
43.0 |
| 1”x3/4” |
45.7 |
50.2 |
34.0 |
27.3 |
21.0 |
15.6 |
15.0 |
15.0 |
43.0 |
43.0 |
| 1-1/4”x1/8” |
55.3 |
59.0 |
42.8 |
10.9 |
6.9 |
4.0 |
17.0 |
17.0 |
47.0 |
47.0 |
| 1-1/4”x1/4” |
55.3 |
59.0 |
42.8 |
14.3 |
9.3 |
6.4 |
17.0 |
17.0 |
47.0 |
47.0 |
| 1-1/4”x3/8” |
55.3 |
59.0 |
42.8 |
17.7 |
12.6 |
9.2 |
17.0 |
17.0 |
47.0 |
47.0 |
| 1-1/4”x1/2” |
55.3 |
59.0 |
42.8 |
21.9 |
15.8 |
11.8 |
17.0 |
17.0 |
47.0 |
47.0 |
| 1-1/4”x3/4” |
55.3 |
59.0 |
42.8 |
27.3 |
21.0 |
15.6 |
17.0 |
17.0 |
47.0 |
47.0 |
| 1-1/4”x1” |
55.3 |
59.0 |
42.8 |
34.0 |
26.7 |
20.7 |
17.0 |
17.0 |
47.0 |
47.0 |
| 1-1/2”x1/8” |
62.5 |
67.1 |
48.9 |
10.9 |
6.9 |
4.0 |
17.5 |
17.5 |
48.0 |
48.0 |
| 1-1/2”x1/4” |
62.5 |
67.1 |
48.9 |
14.3 |
9.3 |
6.4 |
17.5 |
17.5 |
48.0 |
48.0 |
| 1-1/2”x3/8” |
62.5 |
67.1 |
48.9 |
17.7 |
12.6 |
9.2 |
17.5 |
17.5 |
48.0 |
48.0 |
| 1-1/2”x1/2” |
62.5 |
67.1 |
48.9 |
21.9 |
15.8 |
11.8 |
17.5 |
17.5 |
48.0 |
48.0 |
| 1-1/2”x3/4” |
62.5 |
67.1 |
48.9 |
27.3 |
21.0 |
15.6 |
17.5 |
17.5 |
48.0 |
48.0 |
| 1-1/2”x1” |
62.5 |
67.1 |
48.9 |
34.0 |
26.7 |
20.7 |
17.5 |
17.5 |
48.0 |
48.0 |
| 1-1/2”x1-1/4” |
62.5 |
67.1 |
48.9 |
42.8 |
35.1 |
29.5 |
17.5 |
17.5 |
48.0 |
48.0 |
| 2”x1/8” |
75.6 |
83.6 |
61.4 |
10.9 |
6.9 |
4.0 |
22.0 |
22.0 |
63.0 |
63.0 |
| 2”x1/4” |
75.6 |
83.6 |
61.4 |
14.3 |
9.3 |
6.4 |
22.0 |
22.0 |
63.0 |
63.0 |
| 2”x3/8” |
75.6 |
83.6 |
61.4 |
17.7 |
12.6 |
9.2 |
22.0 |
22.0 |
63.0 |
63.0 |
| 2”x1/2” |
75.6 |
83.6 |
61.4 |
21.9 |
15.8 |
11.8 |
22.0 |
22.0 |
63.0 |
63.0 |
| 2”x3/4” |
75.6 |
83.6 |
61.4 |
27.3 |
21.0 |
15.6 |
22.0 |
22.0 |
63.0 |
63.0 |
| 2”x1” |
75.6 |
83.6 |
61.4 |
34.0 |
26.7 |
20.7 |
22.0 |
22.0 |
63.0 |
63.0 |
| 2”x1-1/4” |
75.6 |
83.6 |
61.4 |
42.8 |
35.1 |
29.5 |
22.0 |
22.0 |
63.0 |
63.0 |
ASME B16.11-2011 Socket Weld Reducing Coupling Weight and Dimension Chart (mm, kg)
| Nom. Pipe Size |
H |
B1 |
B2 |
D |
J |
L |
| 3M |
6M |
3M |
6M |
3M |
6M |
3M |
6M |
2”x1-1/2” |
75.6 |
83.6 |
61.4 |
48.9 |
40.9 |
34.0 |
22.0 |
22.0 |
63.0 |
63.0 |
| 2-1/2”x1/8” |
92.0 |
108.5 |
74.1 |
10.9 |
6.9 |
4.0 |
22.0 |
22.4 |
63.0 |
63.5 |
| 2-1/2”x1/4” |
92.0 |
108.5 |
74.1 |
14.3 |
9.3 |
6.4 |
22.0 |
22.4 |
63.0 |
63.5 |
| 2-1/2”x3/8” |
92.0 |
108.5 |
74.1 |
17.7 |
12.6 |
9.2 |
22.0 |
22.4 |
63.0 |
63.5 |
| 2-1/2”x1/2” |
92.0 |
108.5 |
74.1 |
21.9 |
15.8 |
11.8 |
22.0 |
22.4 |
63.0 |
63.5 |
| 2-1/2”x3/4” |
92.0 |
108.5 |
74.1 |
27.3 |
21.0 |
15.6 |
22.0 |
22.4 |
63.0 |
63.5 |
| 2-1/2”x1” |
92.0 |
108.5 |
74.1 |
34.0 |
26.7 |
20.7 |
22.0 |
22.4 |
63.0 |
63.5 |
| 2-1/2”x1-1/4” |
92.0 |
108.5 |
74.1 |
42.8 |
35.1 |
29.5 |
22.0 |
22.4 |
63.0 |
63.5 |
| 2-1/2”x1-1/2” |
92.0 |
108.5 |
74.1 |
48.9 |
40.9 |
34.0 |
22.0 |
22.4 |
63.0 |
63.5 |
| 2-1/2”x2” |
92.0 |
108.5 |
74.1 |
61.4 |
52.5 |
42.9 |
22.0 |
22.4 |
63.0 |
63.5 |
| 3”x1/8” |
109.4 |
127.6 |
90.0 |
10.9 |
6.9 |
4.0 |
22.0 |
25.5 |
63.0 |
70.0 |
| 3”x1/4” |
109.4 |
127.6 |
90.0 |
14.3 |
9.3 |
6.4 |
22.0 |
25.5 |
63.0 |
70.0 |
| 3”x3/8” |
109.4 |
127.6 |
90.0 |
17.7 |
12.6 |
9.2 |
22.0 |
25.5 |
63.0 |
70.0 |
| 3”x1/2” |
109.4 |
127.6 |
90.0 |
21.9 |
15.8 |
11.8 |
22.0 |
25.5 |
63.0 |
70.0 |
| 3”x3/4” |
109.4 |
127.6 |
90.0 |
27.3 |
21.0 |
15.6 |
22.0 |
25.5 |
63.0 |
70.0 |
| 3”x1” |
109.4 |
127.6 |
90.0 |
34.0 |
26.7 |
20.7 |
22.0 |
25.5 |
63.0 |
70.0 |
| 3”x1-1/4” |
109.4 |
127.6 |
90.0 |
42.8 |
35.1 |
29.5 |
22.0 |
25.5 |
63.0 |
70.0 |
| 3”x1-1/2” |
109.4 |
127.6 |
90.0 |
48.9 |
40.9 |
34.0 |
22.0 |
25.5 |
63.0 |
70.0 |
| 3”x2” |
109.4 |
127.6 |
90.0 |
61.4 |
52.5 |
42.9 |
22.0 |
25.5 |
63.0 |
70.0 |
| 3”x2-1/2” |
109.4 |
127.6 |
90.0 |
74.1 |
62.7 |
53.8 |
22.0 |
25.5 |
63.0 |
70.0 |
| 4”x1/8” |
137.1 |
159.0 |
115.4 |
10.9 |
6.9 |
4.0 |
22.0 |
28.4 |
63.0 |
76.2 |
| 4”x1/4” |
137.1 |
159.0 |
115.4 |
14.3 |
9.3 |
6.4 |
22.0 |
28.4 |
63.0 |
76.2 |
| 4”x3/8” |
137.1 |
159.0 |
115.4 |
17.7 |
12.6 |
9.2 |
22.0 |
28.4 |
63.0 |
76.2 |
| 4”x1/2” |
137.1 |
159.0 |
115.4 |
21.9 |
15.8 |
11.8 |
22.0 |
28.4 |
63.0 |
76.2 |
| 4”x3/4” |
137.1 |
159.0 |
115.4 |
27.3 |
21.0 |
15.6 |
22.0 |
28.4 |
63.0 |
76.2 |
| 4”x1” |
137.1 |
159.0 |
115.4 |
34.0 |
26.7 |
20.7 |
22.0 |
28.4 |
63.0 |
76.2 |
| 4”x1-1/4” |
137.1 |
159.0 |
115.4 |
42.8 |
35.1 |
29.5 |
22.0 |
28.4 |
63.0 |
76.2 |
| 4”x1-1/2” |
137.1 |
159.0 |
115.4 |
48.9 |
40.9 |
34.0 |
22.0 |
28.4 |
63.0 |
76.2 |
| 4”x2” |
137.1 |
159.0 |
115.4 |
61.4 |
52.5 |
42.9 |
22.0 |
28.4 |
63.0 |
76.2 |
| 4”x2-1/2” |
137.1 |
159.0 |
115.4 |
74.1 |
62.7 |
53.8 |
22.0 |
28.4 |
63.0 |
76.2 |
| 4”x3” |
137.1 |
159.0 |
115.4 |
90.0 |
78.0 |
66.5 |
22.0 |
28.4 |
63.0 |
76.2 |
ASME B16.11-2011 Socket Weld Eccentric Reducer Coupling Weight and Dimension Chart (mm, kg)
| Nom. Pipe Size |
B1 |
B2 |
D |
C(Min) |
H |
J |
L |
| 1/4”x1/8” |
14.3 |
10.9 |
6.9 |
3.80 |
22.2 |
10.5 |
27.5 |
| 3/8”x1/8” |
17.7 |
10.9 |
6.9 |
4.05 |
26.1 |
10.5 |
28.5 |
| 3/8”x1/4” |
17.7 |
14.3 |
9.3 |
4.05 |
25.1 |
10.5 |
28.5 |
| 1/2”x1/4” |
21.9 |
14.3 |
9.3 |
4.70 |
31.6 |
12.5 |
34.5 |
| 1/2”x3/8” |
21.9 |
17.7 |
12.6 |
4.70 |
31.6 |
12.5 |
34.5 |
| 3/4”x3/8” |
27.3 |
17.7 |
12.6 |
4.90 |
37.4 |
14.0 |
37.5 |
| 3/4”x1/2” |
27.3 |
21.9 |
15.8 |
4.90 |
37.4 |
14.0 |
37.5 |
| 1”x3/8” |
34.0 |
17.7 |
12.6 |
5.70 |
45.7 |
15.0 |
43.0 |
| 1”x1/2” |
34.0 |
21.9 |
15.8 |
5.70 |
45.7 |
15.0 |
43.0 |
| 1”x3/4” |
34.0 |
27.3 |
21.0 |
5.70 |
45.7 |
15.0 |
43.0 |
| 1-1/4”x1/2” |
42.8 |
21.9 |
15.8 |
6.10 |
55.3 |
17.0 |
47.0 |
| 1-1/4”x3/4” |
42.8 |
27.3 |
21.0 |
6.10 |
55.3 |
17.0 |
47.0 |
| 1-1/4”x1” |
42.8 |
34.0 |
26.7 |
6.10 |
55.3 |
17.0 |
47.0 |
| 1-1/2”x1/2” |
48.9 |
21.9 |
15.8 |
6.40 |
62.5 |
17.5 |
48.0 |
| 1-1/2”x3/4” |
48.9 |
27.3 |
21.0 |
6.40 |
62.5 |
17.5 |
48.0 |
| 1-1/2”x1” |
48.9 |
34.0 |
26.7 |
6.40 |
62.5 |
17.5 |
48.0 |
| 1-1/2”x1-1/4” |
48.9 |
42.8 |
35.1 |
6.40 |
62.5 |
17.5 |
48.0 |
| 2”x1” |
61.4 |
34.0 |
26.7 |
6.95 |
75.6 |
22.0 |
63.0 |
| 2”x1-1/4” |
61.4 |
42.8 |
35.1 |
6.95 |
75.6 |
22.0 |
63.0 |
| 2”x1-1/2” |
61.4 |
48.9 |
40.9 |
6.95 |
75.6 |
22.0 |
63.0 |
| 2-1/2”x1-1/4” |
74.1 |
42.8 |
35.1 |
8.80 |
92.0 |
22.0 |
63.0 |
| 2-1/2”x1-1/2” |
74.1 |
48.9 |
40.9 |
8.80 |
92.0 |
22.0 |
63.0 |
| 2-1/2”x2” |
74.1 |
61.4 |
52.5 |
8.80 |
92.0 |
22.0 |
63.0 |
| 3”x1-1/2” |
90.0 |
48.9 |
40.9 |
9.55 |
109.4 |
22.0 |
63.0 |
| 3”x2” |
90.0 |
61.4 |
52.5 |
9.55 |
109.4 |
22.0 |
63.0 |
| 3’x2-1/2” |
90.0 |
74.1 |
62.7 |
9.55 |
109.4 |
22.0 |
63.0 |
| 4”x2” |
115.4 |
61.4 |
52.5 |
10.70 |
137.1 |
22.0 |
63.0 |
| 4”x2-1/2” |
115.4 |
74.1 |
62.7 |
10.70 |
137.1 |
22.0 |
63.0 |
| 4”x3” |
115.4 |
90.0 |
78.0 |
10.70 |
137.1 |
22.0 |
63.0 |
ASME B16.11-2011 Socket Weld Couplet Weight and Dimension Chart (mm, kg)
< class="changeTable">
| DN |
Nom. Pipe Size |
B |
C(1) |
D |
J(Min) |
N |
Q |
M |
G |
| 3M |
6M |
3M |
6M |
3M |
6M |
| Avg |
Min |
Avg |
Min |
| 8 |
1/4” |
14.2 |
3.78 |
3.30 |
4.60 |
4.01 |
9.3 |
6.4 |
9.5 |
17.5 |
9.5 |
30.2 |
23.8 |
25.4 |
| 10 |
3/8” |
17.6 |
4.01 |
3.50 |
5.03 |
4.37 |
12.6 |
9.2 |
9.5 |
20.7 |
9.5 |
30.2 |
27.0 |
31.8 |
| 15 |
1/2” |
21.8 |
4.67 |
4.09 |
5.97 |
5.18 |
15.8 |
11.8 |
9.5 |
23.8 |
9.5 |
33.4 |
33.4 |
38.1 |
| 20 |
3/4” |
27.2 |
4.90 |
4.27 |
6.96 |
6.04 |
21.0 |
15.6 |
12.5 |
27.0 |
9.5 |
34.9 |
38.1 |
44.5 |
| 25 |
1” |
33.9 |
5.69 |
4.98 |
7.92 |
6.93 |
26.7 |
20.7 |
12.5 |
33.4 |
9.5 |
42.9 |
46.1 |
57.2 |
| 32 |
1-1/4” |
42.7 |
6.07 |
5.28 |
7.92 |
6.93 |
35.1 |
29.5 |
12.5 |
42.9 |
9.5 |
47.6 |
55.6 |
63.5 |
| 40 |
1-1/2” |
48.8 |
6.35 |
5.54 |
8.92 |
7.80 |
40.9 |
34.0 |
12.5 |
49.2 |
9.5 |
50.8 |
63.5 |
76.2 |
| 50 |
2” |
61.2 |
6.93 |
6.04 |
10.92 |
9.50 |
52.5 |
42.9 |
16.0 |
61.9 |
9.5 |
57.2 |
79.4 |
92.1 |
| 65 |
2-1/2” |
73.9 |
8.76 |
7.67 |
- |
- |
62.7 |
- |
16.0 |
73.0 |
9.5 |
63.5 |
92.1 |
- |
| 80 |
3” |
89.8 |
9.52 |
8.30 |
- |
- |
78.0 |
- |
16.0 |
88.9 |
9.5 |
69.9 |
111.1 |
- |
| 100 |
4” |
115.2 |
10.69 |
9.35 |
- |
- |
102.3 |
- |
19.0 |
114.3 |
9.5 |
76.2 |
141.3 |
- |
ASME B16.11-2011 Socket Weld Cap Weight and Dimension Chart (mm, kg)
| DN |
Nom. Pipe Size |
Socket Bore Dia. |
Bore Dia. Of Fitting D |
Socket Wall Thickness C (1) |
Depth of Socket (Min) J |
End Wall Thickness (Min) K |
| 3M |
6M |
9M |
3M |
6M |
9M |
| 3M |
6M |
9M |
Avg |
Min |
Avg |
Min |
Avg |
Min |
| 6 |
1/8” |
10.8 |
6.9 |
4.0 |
- |
3.18 |
3.18 |
3.96 |
3.43 |
- |
- |
9.5 |
4.8 |
6.4 |
- |
| 8 |
1/4” |
14.2 |
9.3 |
6.4 |
- |
3.78 |
3.30 |
4.60 |
4.01 |
- |
- |
9.5 |
4.8 |
6.4 |
- |
| 10 |
3/8” |
17.6 |
12.6 |
9.2 |
- |
4.01 |
3.50 |
5.03 |
4.37 |
- |
- |
9.5 |
4.8 |
6.4 |
- |
| 15 |
1/2” |
21.8 |
15.8 |
11.8 |
6.4 |
4.67 |
4.09 |
5.97 |
5.18 |
9.35 |
8.18 |
9.5 |
6.4 |
7.9 |
11.2 |
| 20 |
3/4” |
27.2 |
21.0 |
15.6 |
11.1 |
4.90 |
4.27 |
6.96 |
6.04 |
9.78 |
8.56 |
12.5 |
6.4 |
7.9 |
12.7 |
| 25 |
1” |
33.9 |
26.7 |
20.7 |
15.2 |
5.69 |
4.98 |
7.92 |
6.93 |
11.38 |
9.96 |
12.5 |
9.6 |
11.2 |
14.2 |
| 32 |
1-1/4” |
42.7 |
35.1 |
29.5 |
22.8 |
6.07 |
5.28 |
7.92 |
6.93 |
12.14 |
10.62 |
12.5 |
9.6 |
11.2 |
14.2 |
| 40 |
1-1/2” |
48.8 |
40.9 |
34.0 |
28.0 |
6.35 |
5.54 |
8.92 |
7.80 |
12.70 |
11.12 |
12.5 |
11.2 |
12.7 |
15.7 |
| 50 |
2” |
61.2 |
52.5 |
42.9 |
38.2 |
6.93 |
6.04 |
10.92 |
9.50 |
13.84 |
12.12 |
16.0 |
12.7 |
15.7 |
19.0 |
| 65 |
2-1/2” |
73.9 |
62.7 |
- |
- |
8.76 |
7.67 |
- |
- |
- |
- |
16.0 |
15.7 |
19.0 |
- |
| 80 |
3” |
89.8 |
78.0 |
- |
- |
9.52 |
8.30 |
- |
- |
- |
- |
16.0 |
19.0 |
22.4 |
- |
| 100 |
4” |
115.2 |
102.3 |
- |
- |
10.69 |
9.35 |
- |
- |
- |
- |
19.0 |
22.4 |
28.4 |
- |
ASME B16.11-2011 Socket Weld Union(3000Lb) Weight and Dimension Chart (mm, kg)
< class="changeTable">
| Nom. Pipe Size |
Pipe End (Min) A |
Socket Bore Dia. B (1) |
Socket Wall (Min) C |
Water Way Bore D (1) |
Laying Length E (1) |
Male Flange (Min) F |
Nut (Min) G |
Threads Per 25.4mm H |
Bearing (Min) J |
Depth of Socket (Min) K |
Length Assem. Nom. L |
Clear Assem. Nut N |
| 1/8” |
21.8 |
11.18 10.67 |
3.18 |
7.59 6.07 |
22.4 19.1 |
3.18 |
3.18 |
16 |
1.24 |
9.7 |
41.4 |
50.8 |
| 1/4” |
21.8 |
14.61 14.10 |
3.30 |
10.01 8.48 |
22.4 19.1 |
3.18 |
3.18 |
16 |
1.24 |
9.7 |
41.4 |
50.8 |
| 3/8” |
25.9 |
18.03 17.53 |
3.51 |
13.28 11.76 |
26.9 20.6 |
3.43 |
3.43 |
14 |
1.37 |
9.7 |
46.0 |
55.9 |
| 1/2” |
31.2 |
22.23 21.73 |
4.09 |
16.56 15.04 |
26.9 20.6 |
3.68 |
3.68 |
14 |
1.50 |
9.7 |
49.0 |
58.4 |
| 3/4” |
37.1 |
27.56 27.05 |
4.27 |
21.69 20.17 |
31.8 25.4 |
4.06 |
4.06 |
11 |
1.68 |
12.7 |
56.9 |
66.0 |
| 1” |
45.5 |
34.29 33.78 |
4.98 |
27.41 25.88 |
34.3 26.2 |
4.57 |
4.45 |
11 |
1.85 |
12.7 |
62.0 |
78.7 |
| 1-1/4” |
54.9 |
43.05 42.55 |
5.28 |
35.81 34.29 |
40.6 32.5 |
5.33 |
5.21 |
11 |
2.13 |
12.7 |
71.1 |
94.0 |
| 1-1/2” |
61.5 |
49.15 48.64 |
5.54 |
41.66 40.13 |
42.2 34.0 |
5.84 |
5.59 |
10 |
2.31 |
12.7 |
76.5 |
111.8 |
| 2” |
75.2 |
61.62 61.11 |
6.05 |
53.26 51.74 |
45.5 37.3 |
6.60 |
6.35 |
10 |
2.69 |
15.7 |
86.1 |
132.1 |
| 2-1/2” |
91.7 |
74.45 73.81 |
7.67 |
64.24 61.19 |
61.7 52.1 |
7.49 |
7.11 |
8 |
3.07 |
15.7 |
102.4 |
149.9 |
| 3” |
109.2 |
90.42 89.79 |
8.31 |
79.45 76.40 |
63.8 53.6 |
8.26 |
8.00 |
8 |
3.53 |
15.7 |
109.0 |
175.3 |
Dimensions in accordance with MSS SP-83-2014.
ASME B16.11-2011 Socket Weld Union(6000Lb) Weight and Dimension Chart (mm, kg)
| Nom. Pipe Size |
Pipe End (Min) A |
Socket Bore Dia. B (1) |
Socket Wall (Min) C |
Water Way Bore D (1) |
Laying Length E (1) |
Male Flange (Min) F |
Nut (Min) G |
Threads Per 25.4mm H |
Bearing (Min) J |
Depth of Socket (Min) K |
Length Assem. Nom. L |
Clear Assem. Nut N |
| 1/8” |
21.8 |
11.18 10.67 |
3.43 |
4.80 3.20 |
22.4 19.1 |
3.18 |
3.18 |
16 |
1.24 |
9.7 |
41.4 |
50.8 |
| 1/4” |
25.9 |
14.61 14.10 |
4.01 |
7.11 5.59 |
26.9 20.6 |
3.43 |
3.43 |
14 |
1.37 |
9.7 |
46.0 |
55.9 |
| 3/8” |
31.2 |
18.03 17.53 |
4.37 |
9.88 8.36 |
26.9 20.6 |
3.68 |
3.68 |
14 |
1.50 |
9.7 |
49.0 |
58.4 |
| 1/2” |
37.1 |
22.23 21.72 |
5.18 |
12.55 11.02 |
31.8 25.4 |
4.06 |
4.06 |
11 |
1.68 |
9.7 |
56.9 |
66.0 |
| 3/4” |
45.5 |
27.56 27.05 |
6.05 |
16.31 14.78 |
34.3 26.2 |
4.57 |
4.45 |
11 |
1.85 |
12.7 |
62.0 |
78.7 |
| 1” |
54.9 |
34.29 33.78 |
6.93 |
27.41 25.88 |
40.6 32.5 |
5.33 |
5.21 |
11 |
2.13 |
12.7 |
71.1 |
94.0 |
| 1-1/4” |
61.5 |
43.05 42.55 |
6.93 |
30.23 28.70 |
42.2 34.0 |
5.84 |
5.59 |
10 |
2.31 |
12.7 |
76.5 |
111.8 |
| 1-1/2” |
75.2 |
49.15 48.64 |
7.80 |
34.75 33.22 |
45.5 37.3 |
6.60 |
6.35 |
10 |
2.69 |
12.7 |
86.1 |
132.1 |
| 2” |
91.7 |
61.62 61.11 |
9.50 |
43.61 42.09 |
61.7 52.1 |
7.49 |
7.11 |
8 |
3.07 |
15.7 |
102.4 |
149.9 |
| 2-1/2” |
109.2 |
74.45 73.81 |
10.39 |
54.74 53.21 |
63.8 53.6 |
8.26 |
8.00 |
8 |
3.53 |
15.7 |
109.0 |
175.3 |
Dimensions in accordance with MSS SP-83-2014.
ASME B16.11-2011 Butt Weld 45° Branch Outlet Weight and Dimension Chart (mm, kg)
| Outlet Pipe |
A |
T |
F |
| DN |
Inch |
Min |
Max |
Sch 40/STD |
Sch 80/XS |
| 8 |
1/4” |
38.1 |
42.9 |
2.24 |
3.02 |
13.7 |
| 10 |
3/8” |
38.1 |
42.9 |
2.31 |
3.20 |
17.1 |
| 15 |
1/2” |
38.1 |
42.9 |
2.77 |
3.73 |
21.3 |
| 20 |
3/4” |
44.5 |
50.8 |
2.87 |
3.91 |
26.7 |
| 25 |
1” |
54.0 |
65.1 |
3.38 |
4.55 |
33.4 |
| 32 |
1-1/4” |
54.0 |
65.1 |
3.56 |
4.85 |
42.2 |
| 40 |
1-1/2” |
63.5 |
69.9 |
3.68 |
5.08 |
48.3 |
| 50 |
2” |
73.0 |
88.9 |
3.91 |
5.54 |
60.3 |
1. Wall thickness (T) in accordance with ASME B16.10M,
ASME B36.19M.
2. Dimensions in accordance with MSS SP-97-2012.
ASME B16.11-2011 Socket Weld 90° Elbow Outlet Weight and Dimension Chart (mm, kg)
| Outlet Pipe |
A |
C |
F |
D |
J |
| DN |
Inch |
3000Lb |
6000Lb |
3000Lb |
6000Lb |
3000Lb |
6000Lb |
3000Lb |
6000Lb |
| 8 |
1/4” |
40.5 |
40.5 |
35.2 |
34.9 |
22.0 |
26.0 |
14.35 |
10.0 |
10.0 |
| 10 |
3/8” |
40.5 |
40.5 |
35.2 |
34.9 |
25.9 |
33.0 |
17.80 |
10.0 |
10.0 |
| 15 |
1/2” |
40.5 |
47.6 |
35.2 |
34.9 |
31.4 |
38.0 |
21.95 |
11.1 |
10.0 |
| 20 |
3/4” |
47.6 |
55.6 |
43.6 |
43.6 |
37.1 |
44.0 |
27.30 |
12.7 |
14.3 |
| 25 |
1” |
55.6 |
60.3 |
54.0 |
54.0 |
45.5 |
57.0 |
34.05 |
13.5 |
15.9 |
| 32 |
1-1/4” |
60.3 |
66.7 |
67.5 |
67.5 |
57.0 |
64.0 |
42.80 |
15.1 |
20.6 |
| 40 |
1-1/2” |
66.7 |
85.7 |
76.2 |
76.2 |
64.0 |
76.0 |
48.90 |
15.9 |
20.6 |
| 50 |
2” |
81.0 |
- |
104.8 |
- |
76.0 |
- |
61.35 |
17.5 |
- |
| 65 |
2-1/2” |
82.6 |
- |
106.4 |
- |
92.0 |
- |
74.15 |
23.8 |
- |
| 80 |
3” |
96.8 |
- |
125.4 |
- |
109.2 |
- |
90.10 |
28.6 |
- |
| 100 |
4” |
114.3 |
- |
163.5 |
- |
140.0 |
- |
115.75 |
29.4 |
- |
ASME B16.11-2011 Butt Weld 90° Elbow Outlet Weight and Dimension Chart (mm, kg)
| Outlet Pipe |
A |
C |
F |
T |
| DN |
Inch |
Sch80 |
Sch160 |
Sch80
| Sch160 |
| 8 |
1/4” |
40.5 |
40.5 |
35.2 |
13.7 |
3.0 |
3.7 |
| 10 |
3/8” |
40.5 |
40.5 |
35.2 |
17.1 |
3.2 |
4.0 |
| 15 |
1/2” |
40.5 |
47.6 |
35.2 |
21.3 |
3.7 |
4.7 |
| 20 |
3/4” |
47.6 |
55.6 |
43.6 |
26.7 |
3.9 |
5.5 |
| 25 |
1” |
55.6 |
60.3 |
54.0 |
33.4 |
4.5 |
6.4 |
| 32 |
1-1/4” |
60.3 |
67.7 |
67.5 |
42.2 |
4.9 |
6.4 |
| 40 |
1-1/2” |
66.7 |
85.7 |
76.2 |
48.3 |
5.1 |
7.1 |
| 50 |
2” |
81.0 |
- |
104.8 |
60.3 |
5.5 |
- |
| 65 |
2-1/2” |
82.6 |
- |
106.4 |
73.0 |
7.0 |
- |
| 80 |
3” |
96.8 |
- |
125.4 |
88.9 |
7.6 |
- |
| 100 |
4” |
114.3 |
- |
163.5 |
114.3 |
8.6 |
- |
Weld bevel in accordance with ASME B16.25.
ASME B16.11-2011 Butt Weld Nipple Branch Outlet (Bevel / Plain End) Weight and Dimension Chart(mm, kg)
| Outlet Pipe |
C |
F |
| 3000LB - XS |
6000LB – S160 |
- |
| 1/2” |
23.8 |
13.8 |
21.3 |
| 3/4” |
30.2 |
18.9 |
26.7 |
| 1” |
36.5 |
24.3 |
33.4 |
| 1-1/4” |
44.5 |
32.5 |
42.2 |
| 1-1/2” |
50.8 |
38.1 |
48.3 |
| 2” |
65.1 |
49.2 |
60.3 |
Weld bevel in accordance with ASME B16.25.