ANSI B16.9 Stainless Steel ButtWeld Fittings, Dimensions Chart in mm, kg, PDF online

A buttweld fitting is a pipe fitting that is weldable that allows for change of direction of flow, to branch off, reduces pipe size or attach additional equipment. A buttweld fitting is produced by the process of hot or cold forming, which means that it is bended and moulded to the correct shape. They are also heat treated to remove residual stresses and to achieve special mechanical properties. The ends of buttweld fittings have to be bevelled and the exact shape and form of the bevel depends upon the wall thickness of the pipe it is being attached to. The material of a buttweld fitting can be any one of a number of exotic materials such as super duplex, nickel alloy or 6% Moly. The most of the time, the material of the fitting is the same as the pipe system that it is welded to. Stainless Steel Buttweld Fittings Dimensions Chart is given below.

  • Stainless Steel Buttweld Fitting: Stainless Steel Buttweld Pipe Fittings always have a much higher amount of chromium to their alloys, thereby making them naturally resistant to oxidation. Stainless steel alloys are often categorized on the basis of their crystalline microstructure. Amongst the four categories, the Austenitic SS Fittings are regarded to be one of the most popular material. In fact, it accounts for more than 50% of the consumption world over. There are several factors for the austenitic grade Stainless Steel Pipe Fittings being highly used. More often, amongst the more popular qualities includes properties like excellent corrosion resistance and high tensile strength that accompany the use of SS Pipe Fittings. While the term corrosion resistance is broadly generalized, there are several aspects that are to be considered like resistance to marine environments, sour service conditions or even the presence of acids, alkalis or neutral, yet corrosive solutions. For detailed reference, refer to Dimensions Chart given below.

    Features:
    1. Corrosion Proof
    2. Excellent Quality
    3. Fine Finishing
    4. High Strength
    5. High durability

    Applications:
    Buttweld fittings may be used in a widely, in many industries to change, separate or stop the flow of fluids. The industries where it is used include waste treatment plants, oil processing, breweries, chemical and petrochemical industries, cryogenic plants, paper and pulp production, gas processing and even nuclear power plants. Stainless Steel Buttweld Fittings Dimensions Chart given in mm, kg. The wide variety of implementations shows the strength of the buttweld fitting and how often this specific type of fitting is used.

Specifications of Buttweld Fittings

The dimensional standard of the buttweld fittings we supply are in accordance with the American National Standards Institute (ANSI): ANSI B16.9, MSS SP43 and MSS SP75. All the specifications of buttweld fittings are mentioned in the Dimensions Chart below.

Types of Buttweld fitting:

The types of Buttweld fitting are:

  • Elbows
  • Tees
  • Reducers
  • Cap
  • Stub End

ANSI B16.9/B16.28 90°/45° Long and Short Radius Elbow Weight and Dimension Chart (mm, kg)

image
Nominal Pipe Size (NPS) Outside Diameter at Bevel(OD) Center to End
Long Radius Elbow Short Radius Elbow
90 degree. A 45 degree B 90 degree A
1/2 21.3 38.1 15.7 -
3/4 26.7 38.1 19.1 -
1 33.4 38.1 22.4 25.4
1-1/4 42.2 47.8 25.4 31.8
1-1/2 48.3 57.2 28.4 38.1
2 60.3 76.2 35.1 50.8
2-1/2 73.0 95.2 44.4 63.5
3 88.9 114.3 50.8 76.2
3-1/2 101.6 133.4 57.2 88.9
4 114.3 152.4 63.5 101.6
5 141.3 190.5 79.2 127.0
6 168.3 228.6 95.2 152.4
8 219.1 304.8 127.0 203.2
10 273.1 381.0 158.8 254.0
12 323.9 457.2 190.5 304.8
14 355.6 533.4 222.2 355.6
16 406.4 609.6 254.0 406.4
18 457.2 685.8 285.8 457.2
20 508.0 762.0 317.5 508.0
22 558.8 838.2 342.9 558.8
24 609.6 914.4 381.0 609.6
26 660.4 990.6 406.4 660.4
28 711.2 1066.8 438.2 711.2
30 762.0 1143.0 469.9 762.0
32 812.8 1219.2 501.6 812.8
34 863.6 1295.4 533.4 863.6
36 914.4 1371.6 565.2 914.4
38 965.2 1447.8 599.9 -
40 1016.0 1524.0 632.0 1016.0
42 1066.8 1600.2 660.4 1066.8
44 1117.6 1676.4 695.5 1117.6
46 1168.4 1752.6 726.9 -
48 1219.2 1828.8 759.0 1219.2
52* 1320.8 - - 1320.8
54* 1371.6 2057.4 852.2 1371.6
56* 1422.4 2133.6 883.8 1422.4
60* 1524.0 2286.0 946.9 1524.0
66* 1676.4 2514.6 1041.6 -
68* 1727.0 2591 1073 1727
72* 1829.0 2743 1137 1829
76* 1930.0 2896 1199 1930
80* 2032.0 3048 1263 2032

ANSI B16.9/B16.28 180° Long and Short Radius Elbow Weight and Dimension Chart (mm, kg)

elbow
Nominal Pipe Size (NPS) Outside Diameter at Bevel OD Long Radius Elbow Short Radius Elbow
Short Radius Elbow Center to Center. P Back to Face K
1/2 21.3 76.2 47.8 - -
3/4 26.7 76.2 50.8 - -
1 33.4 76.2 55.6 50.8 41.1
1-1/4 42.2 95.2 69.8 63.5 52.3
1-1/2 48.3 114.3 82.6 76.2 62.0
2 60.3 152.4 106.4 101.6 81.0
2-1/2 73.0 109.5 131.8 127.0 100.1
3 88.9 228.6 158.8 152.4 120.7
3-1/2 101.6 266.7 184.2 177.8 139.7
4 114.3 304.8 209.6 203.2 158.8
5 141.3 381.0 261.9 254.0 196.9
6 168.3 457.2 312.7 304.8 236.5
8 219.1 609.6 414.3 406.4 312.7
10 273.1 762.0 517.7 508.0 390.7
12 323.9 914.4 619.3 609.6 466.9
14 355.6 1066.8 711.2 711.2 533.4
16 406.4 1219.2 812.8 812.8 609.6
18 457.2 1371.6 914.4 914.4 685.8
20 508.0 1524.0 1016.0 1016.0 762.0
22 558.8 1676.4 1117.6 1117.6 838.2
24 609.6 1828.8 1219.2 1219.2 914.4

ANSI B16.9 / MSS SP-75 Equal Tee/Reducing Tee Weight and Dimension Chart (mm, kg)

tee
Nominal Pipe Size (NPS) Outside Diameter At Bevel D Center to End
Run Outlet Run C Outlet (1) M
1/2 x 1/2 21.3 21.3 25.4 25.4
1/2 x 3/8 17.1 25.4
1/2 x 1/4 13.7 25.4
3/4 x 3/4 26.7 26.7 28.4 28.4
3/4 x 1/2 21.3 28.4
3/4 x 3/8 17.1 28.4
1 x 1 33.4 33.4 38.1 38.1
1 x 3/4 26.7 38.1
1 x 1/2 21.3 38.1
1-1/4 x 1-1/4 42.2 42.2 47.8 47.8
1-1/4 x 1 33.4 47.8
1-1/4 x 3/4 26.7 47.8
1-1/4 x 1/2 21.3 47.8
1-1/2 x 1-1/2 48.3 48.3 57.2 57.2
1-1/2 x 1-1/4 42.2 57.2
1-1/2 x 1 33.4 57.2
1-1/2 x 3/4 26.7 57.2
1-1/2 x 1/2 21.3 57.2
2 x 2 60.3 60.3 63.5 63.5
2 x 1-1/2 48.3 60.5
2 x 1-1/4 42.2 57.2
2 x 1 33.4 50.8
2 x 3/4 26.7 44.4
2 x 1/2* 21.3
2-1/2 x 2-1/2 73.0 73.0 76.2 76.2
2-1/2 x 2 60.3 69.8
2-1/2 x 1-1/2 48.3 66.5
2-1/2 x 1-1/4 42.2 63.5
2-1/2 x 1 33.4 57.2
3 x 3 88.9 88.9 85.9 85.9
3 x 2-1/2 73.0 82.6
3 x 2 60.3 76.2
3 x 1-1/2 48.3 73.2
3 x 1-1/4 42.2 69.8
3 x 1* 33.4
3-1/2 x 3-1/2 101.6 101.6 95.2 95.2
3-1/2 x 3 88.9 91.9
3-1/2 x 2-1/2 73.0 88.9
3-1/2 x 2 60.3 82.6
3-1/2 x 1-1/2 48.3 79.2

ANSI B16.9 / MSS SP-75 Equal Tee/Reducing Tee Weight and Dimension Chart (mm, kg)

equal tee
Nominal Pipe Size (NPS) Outside Diameter At Bevel D Center to End
Run Outlet Run C Outlet (1) M
4 x 4 114.3 114.3 104.6 104.6
4 x 3-1/2 101.6 101.6
4 x 3 88.9 98.6
4 x 2-1/2 73.0 95.2
4 x 2 60.3 88.9
4 x 1-1/2 48.3 85.9
4 x 1-1/4 42.2
4 x 1* 33.5
5 x 5 141.3 141.3 124.0 124.0
5 x 4 114.3 117.3
5 x 3-1/2 101.6 114.3
5 x 3 88.9 111.3
5 x 2-1/2 73.0 108.0
5 x 2 60.3 104.6
5 x 1-1/2* 48.3
6 x 6 168.3 168.3 142.7 142.7
6 x 5 141.3 136.7
6 x 4 114.3 130.0
6 x 3-1/2 101.6 127.0
6 x 3 88.9 124.0
6 x 2-1/2 73.0 120.6
6 x 2* 60.3
8 x 8 19.1 219.1 177.8 177.8
8 x 6 168.3 168.1
8 x 5 141.3 162.1
8 x 4 114.3 155.4
8 x 3-1/2 101.6 152.4
8 x 3* 88.9
10 x 10 273.1 273.1 215.9 215.9
10 x 8 219.1 203.2
10 x 6 168.3 193.5
10 x 5 141.3 190.5
10 x 4 114.3 184.2
12 x 12 323.9 323.9 254.0 254.0
12 x 10 273.1 241.3
12 x 8 219.1 228.6
12 x 6 168.3 218.9
12 x 5 141.3 215.9

ANSI B16.9 / MSS SP-75 Equal Tee/Reducing Tee Weight and Dimension Chart (mm, kg)

equal tee
Nominal Pipe Size (NPS) Outside Diameter At Bevel D Center to End
Run Outlet Run C Outlet (1) M
14 x 14 355.6 355.6 279.4 279.4
14 x 12 323.9 269.7
14 x 10 273.1 257.0
14 x 8 219.1 247.6
14 x 6 168.3 238.3
16 x 16 406.4 406.4 304.8 304.8
16 x 14 355.6 304.8
16 x 12 323.9 295.1
16 x 10 273.1 282.4
16 x 8 219.1 373.0
16 x 6 168.3 263.7
18 x 18 457.2 457.2 342.9 342.9
18 x 16 406.4 330.2
18 x 14 355.6 330.2
18 x 12 323.9 320.5
18 x 10 273.1 307.8
18 x 8 219.1 298.4
20 x 20 508.0 508.0 381.0 381.0
20 x 18 457.2 369.3
20 x 16 406.4 355.6
20 x 14 355.6 355.6
20 x 12 323.9 345.9
20 x 10 273.1 333.2
20 x 8 219.1 323.8
22 x 22 558.8 558.8 419.1 419.1
22 x 20 508.0 406.4
22 x 18 457.2 393.7
22 x 16 406.4 381.0
22 x 14 355.6 381.0
22 x 12 323.9 371.3
22 x 10 273.1 358.6
24 x 24 609.6 609.6 431.8 431.8
24 x 22 558.8 431.8
24 x 20 508.0 431.8
24 x 18 457.2 419.1
24 x 16 406.4 406.4
24 x 14 355.6 406.4
24 x 12 323.9 396.7
24 x 10 273.1 384.0
26 x 26 660.4 660.4 495.3 495.3
26 x 24 609.6 482.6

ANSI B16.9 / MSS SP-75 Equal Tee/Reducing Tee Weight and Dimension Chart (mm, kg)

equal tee
Nominal Pipe Size (NPS) Outside Diameter At Bevel D Center to End
Run Outlet Run C Outlet (1) M
26 x 22 558.8 469.9
26 x 20 508.0 457.2
26 x 18 457.2 444.5
26 x 16 406.4 431.8
26 x 14 355.6 431.8
26 x 12 323.1 422.1
28 x 28 711.2 711.2 520.7 520.7
28 x 26 660.4 520.7
28 x 24 609.6 508.0
28 x 22 558.8 495.3
28 x 20 508.0 482.6
28 x 18 457.2 469.9
28 x 16 406.4 457.2
28 x 14 355.6 457.2
28 x 12 323.1 447.5
30 x 30 762.0 762.0 558.8 558.8
30 x 28 711.2 546.1
30 x 26 660.4 546.1
30 x 24 609.6 533.4
30 x 22 558.8 520.7
30 x 20 508.0 508.0
30 x 18 457.2 495.3
30 x 16 406.4 482.6
30 x 14 355.6 482.6
30 x 12 323.9 472.6
30 x 10 273.1 460.2
32 x 32 812.8 812.8 596.9 596.9
32 x 30 762.0 584.2
32 x 28 711.2 571.5
32 x 26 660.4 571.5
32 x 24 609.6 558.8
32 x 22 558.8 546.1
32 x 20 508.0 533.4
32 x 18 457.2 520.7
32 x 16 406.4 508.0
32 x 14 355.6 508.0
34 x 34 863.6 863.6 635.0 635.0
34 x 32 812.8 622.3
34 x 30 762.0 609.6
34 x 28 711.2 596.9
34 x 26 660.4 596.9

ANSI B16.9 / MSS SP-75 Equal Tee/Reducing Tee Weight and Dimension Chart (mm, kg)

equal tee
Nominal Pipe Size (NPS) Outside Diameter At Bevel D Center to End
Run Outlet Run C Outlet (1) M
34 x 24 609.6 584.2
34 x 22 558.8 571.5
34 x 20 508.0 558.8
34 x 18 457.2 546.1
34 x 16 406.4 533.4
36 x 36 914.4 914.4 673.1 673.1
36 x 34 863.6 660.4
36 x 32 812.8 647.7
36 x 30 762.0 635.0
36 x 28 711.2 622.3
36 x 26 660.4 622.3
36 x 24 609.6 609.6
36 x 22 558.8 596.9
36 x 20 508.0 584.2
36 x 18 457.2 571.5
36 x 16 406.4 558.8
38 x 38 965.2 965.2 711.2 711.2
38 x 36 914.4 711.2
38 x 34 863.6 698.5
38 x 32 812.8 685.8
38 x 30 762.0 673.1
38 x 28 711.2 647.7
38 x 26 660.4 647.7
38 x 24 609.6 635.0
38 x 22 558.8 622.3
38 x 20 508.0 609.6
38 x 18 457.2 596.9
40 x 40 1016.0 1016.0 749.3 749.3
40 x 38 965.2 749.3
40 x 36 914.4 736.6
40 x 34 863.6 723.9
40 x 32 812.8 711.2
40 x 30 762.0 698.5
40 x 28 711.2 673.1
40 x 26 660.4 673.1
40 x 24 609.6 660.4
40 x 22 558.8 647.7
40 x 20 508.0 635.0
40 x 18 457.2 622.3
42 x 42 1066.8 1066.8 762.0 711.2
42 x 40 1016.0 711.2

ANSI B16.9 / MSS SP-75 Equal Tee/Reducing Tee Weight and Dimension Chart (mm, kg)

equal tee
Nominal Pipe Size (NPS) Outside Diameter At Bevel D Center to End
Run Outlet Run C Outlet (1) M
42 x 38 965.2 711.2
42 x 36 914.4 711.2
42 x 34 863.6 711.2
42 x 32 812.8 711.2
42 x 30 762.0 711.2
42 x 28 1066.8 711.2 762.0 698.5
42 x 26 660.4 698.5
42 x 24 609.6 660.4
42 x 22 558.8 660.4
42 x 20 508.0 660.4
42 x 18 457.2 647.7
42 x 16 406.4 635.0
44 x 44 1117.6 1117.6 812.8 762.0
44 x 42 1066.8 762.0
44 x 40 1016.0 749.3
44 x 38 965.2 736.6
44 x 36 914.4 723.9
44 x 34 863.6 723.9
44 x 32 812.8 711.2
44 x 30 762.0 711.2
44 x 28 711.2 698.5
44 x 26 660.4 698.5
44 x 24 609.6 698.5
44 x 22 558.8 685.8
44 x 20 508.0 685.8
46 x 46 1168.4 1168.4 850.9 800.1
46 x 44 1117.6 800.1
46 x 42 1066.8 787.4
46 x 40 1016.0 774.7
46 x 38 965.2 762.0
46 x 36 914.4 762.0
46 x 34 863.6 749.3
46 x 32 812.8 749.3
46 x 30 762.0 736.6
46 x 28 711.2 736.6
46 x 26 660.4 736.6
46 x 24 609.6 723.9
46 x 20* 508.0 723.9
48 x 48 1219.2 1219.2 889.0 838.2
48 x 46 1168.4 838.2
48 x 44 1117.6 838.2
48 x 42 1066.8 812.8
48 x 40 1016.0 812.8
48 x 38 965.2 812.8
48 x 36 914.4 787.4
48 x 34 863.6 787.4
48 x 32 1219.2 812.8 889.0 787.4
48 x 44 1117.6 838.2
48 x 42 1066.8 812.8
48 x 40 1016.0 812.8
48 x 38 965.2 812.8
48 x 36 914.4 787.4
48 x 34 863.6 787.4
48 x 32 812.8 787.4
48 x 30 762.0 762.0
48 x 28 711.2 762.0
48 x 26 660.4 762.0
48 x 24 609.6 736.6
48 x 22 558.8 736.6
52 x 52* 1320.8 1320.8 965.2 914.4
52 x 48* 1219.2 863.6
52 x 44* 1117.6 812.8
52 x 40* 1016.0 762.0
54 x 54* 1371.6 1371.6 1003.3 952.5
54 x 52* 1320.8 914.4
54 x 48* 1219.2 863.6
54 x 44* 1117.6 863.6
54 x 40* 1016.0 812.8
54 x 28* 711.2 787.4
54 x 20* 508.0 787.4
56 x 56* 1422.4 1422.4 1041.4 965.2
56 x 52* 1320.8 914.4
56 x 48* 1219.2 863.6
56 x 44* 1117.6 812.8
56 x 40* 1016.0 812.8
56 x 28* 711.2 812.8
56 x 20* 508.0 812.8
60 x 60* 1524.0 1524.0 1117.6 1016.0
60 x 56* 1422.4 965.2
60 x 52* 1320.8 914.4
60 x 48* 1219.2 863.6
60 x 40* 1016.0 863.6
60 x 28* 711.2 863.6
60 x 20* 508.0 863.6
64 x 64* 1626.0 1626.0 1194.0 1092.0
64 x 60* 1524.0 1067.0
64 x 56* 1422.0 1016.0
64 x 52* 1321.0 965.0
64 x 48* 1219.0 914
66 x 66* 1676.4 1676.4 1219.2 1066.8
68 x 68* 1727.0 1727.0 1270.0 1168.0
68 x 64* 1626.0 1143.0
68 x 60* 1524.0 1118.0
68 x 56* 1422.0 1067.0
68 x 52* 1321.0 1016.0
68 x 48* 1219.0 965.0
72 x 72* 1829.0 1829.0 1320.0 1245.0
72 x 68* 1727.0 1219.0
72 x 64* 1626.0 1194.0
72 x 60* 1524.0 1168.0
72 x 56* 1829.0 1422.0 1320.0 1118.0
72 x 52* 1321.0 1067.0
72 x 48* 1219.0 1016.0
76 x 76* 1930.0 1930.0 1422.0 1320.0
76 x 72* 1829.0 1295.0
76 x 68* 1727.0 1270.0
76 x 64* 1626.0 1245.0
76 x 60* 1524.0 1219.0
76 x 56* 1422.0 1168.0
76 x 52* 1321.0 1118.0
76 x 48* 1219.0 1067.0
80 x 80* 2032.0 2032.0 1499.0 1397.0
80 x 76* 1930.0 1372.0
80 x 72* 1829.0 1346.0
80 x 68* 1727.0 1321.0
80 x 64* 1626.0 1295.0
80 x 60* 1524.0 1270.0
80 x 56* 1422.0 1219.0
80 x 52* 1321.0 1168.0
80 x 48* 1219.0 1118.0

ANSI B16.9 / MSS SP-75 Cap Weight and Dimension Chart (mm, kg)

Cap
Nominal Pipe Size (NPS) Outside Diameter at Bevel D Center to End E
1/2 21.3 25.4
3/4 26.7 25.4
1 33.4 38.1
1-1/4 42.2 38.1
1-1/2 48.3 38.1
2 60.3 38.1
2-1/2 73.0 38.1
3 88.9 50.8
3-1/2 101.6 63.5
4 114.3 63.5
5 141.3 76.2
6 168.3 88.9
8 219.1 101.6
10 273.1 127.0
12 323.9 152.4
14 355.6 165.1
16 406.4 177.8
18 457.2 203.2
20 508.0 228.6
22 558.8 254.0
24 609.6 266.7
26 660.4 266.7
28 711.2 266.7
30 762.0 266.7
32 812.8 266.7
34 863.6 266.7
36 914.4 266.7
38 965.2 304.8
40 1016.0 304.8
42 1066.8 304.8
44 1117.6 342.9
46 1168.4 342.9
48 1219.2 342.9

ANSI B36.19M Wall Thickness Schedule Dimension Chart (mm, kg)

Nominal Pipe Size Outside Diameter Nominal Wall Thickness
A B JIS ANSI Sch 5S Sch 10S Sch 20S GS Sch 10 LG (7.9) Sch 20 Sch 30 STD Sch 40 Sch 60 XS Sch 80 Sch 100 Sch 120 Sch 140 Sch 160 XXS
8 1/4 13.8 13.7 1.2 1.65 2.0 2.3 - - - - (2.2) 2.2 2.4 (3.0) 3.0 - - - - -
10 3/8 17.3 17.1 1.2 1.65 2.0 2.3 - - - - (2.3) 2.3 2.8 (3.2) 3.2 - - - - -
15 1/2 21.7 21.3 1.65 2.1 2.5 2.8 - - - - (2.8) 2.8 3.2 (3.7) 3.7 - - - 4.7 7.5
20 3/4 27.2 26.7 1.65 2.1 2.5 2.8 - - - - (2.9) 2.9 3.4 (3.9) 3.9 - - - 5.5 7.8
25 1 34.0 33.4 1.65 2.8 3.0 3.2 - - - - (3.4) 3.4 3.9 (4.5) 4.5 - - - 6.4 9.1
32 1-1/4 42.7 42.2 1.65 2.8 3.0 3.5 - - - - (3.6) 3.6 4.5 (4.9) 4.9 - - - 6.4 9.7
40 1-1/2 48.6 48.3 1.65 2.8 3.0 3.5 - - - - (3.7) 3.7 4.5 (5.1) 5.1 - - - 7.1 10.2
50 2 60.5 60.3 1.65 2.8 3.5 3.8 - - - - (3.9) 3.9 4.9 (5.5) 5.5 - - - 8.7 11.1
65 2-1/2 76.3 73.0 2.1 3.0 3.5 4.2 - - - - (5.2) 5.2 6.0 (7.0) 7.0 - - - 9.5 14.0
80 3 89.1 88.9 2.1 3.0 4.0 4.2 - - - - (5.5) 5.5 6.6 (7.6) 7.6 - - - 11.1 15.2
90 3-1/2 101.6 101.6 2.1 3.0 4.0 4.2 - - - - (5.7) 5.7 7.0 (8.1) 8.1 - - - 12.7 -
100 4 114.3 114.3 2.1 3.0 4.0 4.5 - - - - (6.0) 6.0 7.1 (8.6) 8.6 - 11.1 - 13.5 17.1
125 5 139.8 141.3 2.8 3.4 5.0 4.5 - - - - (6.6) 6.6 8.1 (9.5) 9.5 - 12.7 - 15.9 19.0
150 6 165.2 168.3 2.8 3.4 5.0 5.0 - 5.0** - - (7.1) 7.1 9.3 (11.0) 11.0 - 14.3 - 18.2 21.9
175 7 190.7 - - - - 5.3 - - - - - - - - - - - - - -
200 8 216.3 219.1 2.8 3.8 6.5 5.8 - 5.8** 6.4 7.0 (8.2) 8.2 10.3 (12.7) 12.7 15.1 18.2 20.6 23.0 22.2
225 9 241.8 - - - - 6.2 - - - - - - - - - - - - - -
250 10 267.4 273.1 3.4 4.2 6.5 6.6 - 6.6** 6.4 7.8 (9.3) 9.3 12.7 12.7 15.1 18.3 21.4 25.4 28.6 25.4
300 12 318.5 323.9 4.0 4.6 6.5 6.9 - 6.9** 6.4 8.4 9.5 10.3 14.3 12.7 17.4 21.4 25.4 28.6 33.3 25.4
350 14 355.6 355.6 4.0 4.8 7.9 7.9 6.4 7.9 7.9 9.5 9.5 11.1 15.1 12.7 19.0 23.8 27.8 31.8 35.7 -
400 16 406.4 406.4 4.2 4.8 7.9 7.9 6.4 7.9 7.9 9.5 9.5 12.7 16.7 12.7 21.4 26.2 30.9 36.5 40.5 -
450 18 457.2 457.2 4.2 4.8 7.9 7.9 6.4 7.9 7.9 11.1 9.5 14.3 19.0 12.7 23.8 29.4 34.9 39.7 45.2 -
500 20 508.0 508.0 4.8 5.5 7.9 7.9 6.4 7.9 9.5 12.7 9.5 15.1 20.6 12.7 26.2 32.5 38.1 44.4 50.0 -
550 22 558.8 558.8 4.8 5.5 - - 6.4 7.9 9.5 12.7 9.5 - 22.2 12.7 28.6 34.9 41.3 47.6 54.0 -
600 24 609.6 609.6 5.5 6.4 - - 6.4 7.9 9.5 14.3 9.5 17.5 24.6 12.7 31.0 38.9 46.0 52.4 59.5 -
650 26 660.4 660.4 - - - - 7.9 7.9 12.7 - 9.5 - - 12.7 - - - - - -
700 28 711.2 711.2 - - - - 7.9 7.9 12.7 15.9 9.5 - - 12.7 - - - - - -
750 30 762.0 762.0 6.4 7.9 - - 7.9 7.9 12.7 15.9 9.5 - - 12.7 - - - - - -
800 32 812.8 812.8 - - - - 7.9 7.9 12.7 15.9 9.5 17.5 - 12.7 - - - - - -
850 34 863.6 863.6 - - - - 7.9 7.9 12.7 15.9 9.5 17.5 - 12.7 - - - - - -
900 36 914.4 914.4 - - - - 7.9 7.9 12.7 15.9 9.5 19.1 - 12.7 - - - - - -
950 38 965.2 965.2 - - - - - 7.9 12.7 - 9.5 - - 12.7 - - - - - -
1000 40 1016.0 1016.0 - - - - - 7.9 - - 9.5 - - 12.7 - - - - - -
1050 42 1066.8 1066.8 - - - - - 7.9 - - 9.5 - - 12.7 - - - - - -
1100 44 1117.6 1117.6 - - - - - 7.9 - - 9.5 - - 12.7 - - - - - -
1150 46 1168.4 1168.4 - - - - - 7.9 - - 9.5 - - 12.7 - - - - - -
1200 48 1219.2 1219.2 - - - - - 7.9 - - 9.5 - - 12.7 - - - - - -
1250 50 1270.0 1270.0 - - - - - 7.9 - - 9.5 - - 12.7 - - - - - -
1300 52 1320.8 1320.8 - - - - - 7.9 - - 9.5 - - 12.7 - - - - - -
1350 54 1371.6 1371.6 - - - - - 7.9 - - 9.5 - - 12.7 - - - - - -
1400 56 1422.4 1422.4 - - - - - 7.9 - - 9.5 - - 12.7 - - - - - -
1450 58 1473.2 1473.2 - - - - - 7.9 - - 9.5 - - 12.7 - - - - - -
1500 60 1524.0 1524.0 - - - - - 7.9 - - 9.5 - - 12.7 - - - - - -
1600 64 1626.0
1700 68 1727.0
1800 72 1829.0
1900 76 1932.0
2000 80 2032.0
Dimensions in accordance with JIS G3448, JIS G3455, JIS G3454, JIS G3459, ANSI B36.10M