Carbon Steel Sheets, Plate and Coil Weight, Dimensions Chart in mm, kg, PDF online
Carbon Steel Sheets:
Carbon steel sheets are mainly composed of iron and carbon, with trace amounts of other elements like manganese, phosphorus, sulphur, and silicon. The carbon content normally ranges from 0.05% to 2.0%. Carbon steel sheets come in variety of thicknesses, from thin foils (less than 0.01 inches) to thicker sheets (up to several inches thick). The choice of thickness depends on your project requirements. They are come in standard sizes, such as 4x8 feet, but can be custom-cut to specific dimensions according to your needs. Carbon steel sheets can have different surface finishes, including hot-rolled, cold-rolled, and coated finishes, depending on the manufacturing process and application. Carbon steel sheets are used in construction, manufacturing, shipbuilding, energy, aerospace, infrastructure, automotive, and cookware, among other industrial sectors. For detailed measurements, refer to dimensions chart below.
Carbon Steel Plates:
Carbon steel plates have a similar composition to carbon steel sheets, mainly consisting of iron and carbon, with some changes in levels of other alloying elements based on the desired properties. Carbon steel plates are normally thicker than sheets and are used for heavy-duty applications. They can range from 3/16 inch to several inches thick. Carbon steel plates come in standard sizes, and various custom sizes can also be obtained. Plates are normally larger in size compared to sheets. The surface finish of carbon steel plates can change depending on the manufacturing process, similar to carbon steel sheets. Carbon steel plates are used in applications requiring high strength and toughness, such as pressure vessels, boilers, heavy machinery, bridges, and structural parts. The dimensions of Carbon Steel Sheets, Plates and Coils in Dimensions Chart are in mm, kg given below.
Carbon Steel Coils:
Carbon steel coils are normally made from the same carbon steel as sheets and plates. They are commonly in the form of a continuous roll or strip. The thickness of carbon steel coils can change widely depending on the manufacturing process and the project applications. They can range from very thin to relatively thick. Carbon steel coils come in various widths and lengths, making them suitable for a broad range of manufacturing processes. The surface finish of carbon steel coils can change, with options for both rough and finished surfaces. Carbon steel coils are used in industries such as automotive manufacturing, construction, and appliance production. They are often processed and prepared into sheets or plates after rolling. Carbon steel coils dimensions chart are measured in mm, kg.
Carbon Steel Plate Specifications
| Item |
Carbon steel plate |
| Thicknesses |
2mm-20mm |
| Width |
600mm-3,000mm |
| Common Materials |
Q235, Q345, Q390, Q420, Q460, etc. |
| Length |
As per your requirements |
| Standard |
GB, ASTM, JIS, DIN, BS, NF |
| Value-added Services |
Slitting, cutting, punching, bending, and other processing services |
| Package |
Standard export packaging |
| Delivery Time |
Within 7-30 working days, mainly depends on the order quantity |
Common Structural Carbon Steel Plate Grades Chart
| China |
America |
Japan |
Germany |
England |
France |
ISO |
| GB |
ASTM |
JIS |
DIN, DINEN |
BS, BSEN |
NF, NFEN |
ISO 630 |
| Q195 |
Cr.B |
CS330; SPHC; SPHD |
S185 |
040;A10;S185 |
S185 |
|
| Q215A |
Cr.C; Cr.58 |
CS330; SPHC |
|
|
|
|
| Q235A |
Cr.D |
CS440; SM400A |
|
|
|
E235B |
| Q235B |
Cr.D |
CS440; SM400A |
S235JR; S235JRG1; S235JRG2 |
S235JR; S235JRG1; S235JRG2 |
S235JR; S235JRG1; S235JRG2 |
E235B |
| Q255A |
|
CS440; SM400A |
|
|
|
|
| Q275 |
|
CS490 |
|
|
|
E275A |
EN 10083 c45 carbon steel plates Dimension tolerance
| OUTER DIAMETER AND WALL THICKNESS |
| Execution |
Size Range |
OD Tolerance |
Wall tolerance |
| Hot-rolled Tube |
OD – 80 mmOD > 80 mmWall |
± 0.4 mm± 0.5 % of OD |
± 0.7 mm± (5 % x wallthickness + 0.1 mm) |
| Hot-rolled peeled tube |
All sizesWall |
+ 0.25/- 0 mm |
± 0.8 mm± (5 % x wall thickness+ 0.2 mm) |
| Cold Worked tubecold-rolled or cold-drawn |
OD 80 Wall Thickness 8 |
+ 0.30/- 0 mm*+ 0.35/- 0 mm*+ 0.40/- 0 mm* |
± 0.30 mm± 0.35 mm± 0.40 mm |
| C45 Sheets Component length (mm) |
OD 30-100 mm |
OD 100-254 mm |
| 10-100 |
+ 1.0/- 0 |
+ 2.0/- 0 |
| 100-600 |
+ 2.0/- 0 |
+ 3.0/- 0 |
| 600-1200 |
+ 3.0/- 0 |
+ 4.0/- 0 |
| 1200-5000 |
+ 5.0/- 0 |
+ 6.0/- 0 |
Hot Rolled Carbon Steel Strip Weight
| Thickness Chart in Inches |
Plate Weight per Unit Area |
Density |
| 3/16 |
0.06000 lbs/in²42.184176 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
| 1/4 |
0.08 lbs/in²56.245568 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
| 3/8 |
0.121 lbs/in²85.0714216 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
| 1/2 |
0.161 lbs/in²113.1942056 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
| 5/8 |
0.196 lbs/in²137.8016416 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
| 3/4 |
0.235 lbs/in²165.221356 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
| 7/8 |
0.274 lbs/in²192.6410704 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
| 1 |
0.313 lbs/in²220.0607848 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
| 1 1/4 |
0.391 lbs/in²274.9002136 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
| 1 1/2 |
0.47 lbs/in²330.442712 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
| 1 3/4 |
0.549 lbs/in²385.9852104 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
| 2 |
0.627 lbs/in²440.8246392 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
| 2 1/4 |
0.705 lbs/in²495.664068 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
| 2 1/2 |
0.784 lbs/in²551.2065664 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
| 2 3/4 |
0.862 lbs/in²606.0459952 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
| 3 |
0.941 lbs/in²661.5884936 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
Dimension Chart of Carbon Steel Cold Rolled plates
| Plate Surface finish |
Thickness (mm) |
Width (max mm) |
| 2B – Cold rolled, heat treated, pickled, skin passed Sheet |
0.25–8.0 |
2032 |
| 2D – Cold rolled, heat treated, pickled Sheet |
0.4–6.35 |
1524 |
| 2E – Cold rolled, heat treated, mechanically descaled plate |
0.4–8.0 |
2032 |
| 2R – Cold rolled, bright annealed plate |
0.25–3.5 |
1524 |
| 2H – Work hardened plate |
0.4–6.35 |
1524 |
| Polished, brushed plate |
0.5–4.0 |
1524 |
ASTM A1008 Carbon Steel Cold Rolled Sheet Imperial Dimensions
| Plate Surface finish |
Gauge (in) |
Width (max in) |
| 2B – Cold rolled, heat treated, pickled, skin passed Plate |
10–24 |
72* |
| 2D – Cold rolled, heat treated, pickled plate |
12–24 |
60 |
| BA Mexinox only |
18–28 |
48 |
| Polished Sheet (not brushed) |
11–24 |
60 |
| Temper rolled Sheet Mexinox only |
13–29 |
48 |
Carbon Steel Coils Mechnical Composition
| Grade |
Thickness |
Yield |
Tensile |
Elongation |
| A515 Grade 70 |
50-200mm |
MPa -551 min |
MPa – 485-620 |
17-21% |
| A515 Grade 60 |
50-200mm |
MPa -220 min |
MPa – 415-550 |
21-25% |
| A516 Grade 70 |
6-100mm |
MPa -260 min |
MPa – 485-620 |
17-21% |
| A516 Grade 60 |
6-100mm |
MPa -220 min |
MPa – 415-550 |
21-25% |
| A516 Grade 65 |
6-100mm |
MPa -240 min |
MPa – 450-585 |
19-23% |
| A572 Grade 50 |
8mm-200mm |
MPa -345 min |
MPa – 450 |
18-21% |
| A572 Grade 42 |
8mm-200mm |
MPa -290 min |
MPa – 415 |
20-24% |
Chemical Properties of High Carbon Steel Shim
| Grade
| C
| Mn
| P
| S
| P
| V
| Ni
| Co
| Cr
| Si
|
| A515 Grade 70 |
0.30-0.35 |
1.30 max |
0.035 max |
0.035 max |
|
|
|
|
|
0.13-0.45 |
| A515 Grade 60 |
0.24-0.31 |
0.98 max |
0.035 max |
0.035 max |
|
|
|
|
|
0.13-0.45 |
| A516 Grade 70 |
0.27-0.31 |
0.79 – 1.30 |
0.035 max |
0.035 max |
|
|
|
|
|
0.13-0.45 |
| A516 Grade 60 |
0.21-0.27 |
0.55 – 0.98 |
0.035 max |
0.035 max |
|
|
|
|
|
0.13-0.45 |
| A516 Grade 65 |
0.24-0.29 |
0.79 – 1.30 |
0.035 max |
0.035 max |
|
|
|
|
|
0.13-0.45 |
| C45 |
0.42-0.50 |
0.50-0.80 |
0.025 max |
0.025 max |
|
|
|
|
0.20-0.40 |
0.15-0.35 |
| EN8 |
0.35 TO 0.45 |
0.60 TO 1.00 |
0.06 max |
0.06 max |
|
|
|
|
|
0.05 – 0.30 |
| A572 Grade 50 |
0.23 |
1.35 |
0.04 |
0.05 |
0.04 |
0.06 |
0.015 |
0.05 |
|
0.4 |
| A572 Grade 42 |
0.21 |
1.35 |
0.04 |
0.05 |
0.04 |
0.06 |
0.015 |
0.05 |
|
0.4 |