ANSI B16.5 Copper Flanges Weight, Dimensions Chart in mm, kg, PDF online

Copper flanges are components used in piping systems to connect pipes, valves, or equipment safely and provide a seal at the joint. They are manufactured with a flat, circular plate with openings for bolting to other flanges or equipment. Copper flanges are usually made from copper or copper alloys. Common copper alloys used for flanges include bronze (copper-tin alloy) and brass (copper-zinc alloy). The selection of material depends on the specific requirements of the application, including factors like corrosion resistance, electrical conductivity, and compatibility with other materials in the system. Copper Flanges weight dimensions are in kg.

Copper Flanges exhibit excellent electrical conductivity, corrosion resistance, thermal conductivity and aesthetic appeal. Due to these properties, copper flanges are used in a various applications, including plumbing, heating, cooling, and industrial processes. Also used in electrical and electronic applications. Copper Flanges are also used in systems where copper's unique properties, such as excellent thermal conductivity and corrosion resistance, are helpful. For detailed measurements of copper flanges, refer to dimensions chart below.

Copper Flanges Types

• 1. COPPER SLIP-ON FLANGES - The bore size of the Copper Slip-On Flange as a standard is slightly larger than the outside diameter of the connecting pipe, as the pipe has to slide inside the flange then needs to be connected by the execution of the fillet weld around the border. Copper Flanges Dimensions are in mm and kg.
• 2. COPPER WELD NECK FLANGES - Copper Weld Neck Flanges are helpful in high/low-temperature applications and high-pressures that require an unlimited fluid flow conveyed by the piping system. These butt-weld end connection flanges are most usual in industrial applications to ensure a high strength connection between assemblies. Refer to Dimensions Chart for detailed dimensions.
• 3. COPPER BLIND FLANGES - Most piping systems require regular audit and blind/blank flanges are most usual inspection point. This Copper Blind Flanges, when selected according to the suitable pressure class, can easily handle the tension caused by the liquid’s operating pressure and pressure flowing through the pipe. They are useful to ‘blank off’ valves, pipelines, etc. in almost all applications. Copper Flanges Dimensions are in mm and kg.
• 4. COPPER THREADED FLANGES - You can build the Copper Threaded Flanges without welding, and hence it is easy to remove. You do not have to use it for usages where bending stresses involve high pressure or temperatures. A seal weld is useful in combination with times. Refer to Dimensions Chart for detailed dimensions.
• 5. COPPER LAP JOINT FLANGES - Lap Joint Flanges is a type of slip-on flange but made for connecting to a stub end for rotation. Lap joints are helpful to keep carbon/low alloy steel pipes with additional mechanical properties. Copper Lap Joint flanges are similar to slip-on flanges but are characterized by the radius-rounded interior edge of the flange face and generally come with a taller hub. Copper Flanges Dimensions are in mm and kg.
• 6. COPPER SOCKET-WELD FLANGES - Smaller diameter socket weld and counter bore flanges handle the applications with high pressures like steam lines but with restricted spacing. You must ensure toughness possess internal welds—the bore of the pipe and flange match provides a good flow connection. Refer to Dimensions Chart for detailed dimensions of Copper Socket-Weld Flanges.

Copper Flanges Specifications

Copper flanges come in various sizes and dimensions, conforming to industry standards such as ASME B16.5 for pipe flanges and ASME B16.24 for copper alloy pipe flanges. The size and dimensions of the flange depend on the pipe size and pressure class. Copper flanges are rated based on their pressure class, which indicates the maximum working pressure the flange can withstand at various temperatures. Pressure classes include 150#, 300#, 600#, 900#, and higher. Refer to Dimensions Chart for detailed dimensions.

ANSI B16.5 Class 150 Flanges Weight and Dimension Chart (mm, kg)

Nominal Pipe Size (inches)	Class 150
	Diameter of Flange (inches)	No. of Bolts	Diameter of Bolts (inches)	Diameter of Bolt Holes (inches)	Bolt Circle (inches)
1/4	3-3/8	4	1/2	0.62	2-1/4
1/2	3-1/2	4	1/2	0.62	2-3/8
3/4	3-7/8	4	1/2	0.62	2-3/4
1	4-1/4	4	1/2	0.62	3-1/8
1-1/4	4-5/8	4	1/2	0.62	3-1/2
1-1/2	5	4	1/2	0.62	3-7/8
2	6	4	5/8	0.75	4-3/4
2-1/2	7	4	5/8	0.75	5-1/2
3	7-1/2	4	5/8	0.75	6
3-1/2	8-1/2	8	5/8	0.75	7
4	9	8	5/8	0.75	7-1/2
5	10	8	3/4	0.88	8-1/2
6	11	8	3/4	0.88	9-1/2
8	13-1/2	8	3/4	0.88	11-3/4
10	16	12	7/8	1	14-1/4
12	19	12	7/8	1	17
14	21	12	1	1.12	18-3/4
16	23-1/2	16	1	1.12	21-1/4
18	25	16	1-1/8	1.25	22-3/4
20	27-1/2	20	1-1/8	1.25	25
24	32	20	1-1/4	1.38	29-1/2

ANSI B16.5 Class 300 Flanges Weight and Dimension Chart (mm, kg)

Nominal Pipe Size NPS (inches)	Class 300
	Diameter of Flange (inches)	No. of Bolts	Diameter of Bolts (inches)	Diameter of Bolt Holes (inches)	Bolt Circle (inches)
1/4	3-3/8	4	1/2	0.62	2-1/4
1/2	3-3/4	4	1/2	0.62	2-5/8
3/4	4-5/8	4	5/8	0.75	3-1/4
1	4-7/8	4	5/8	0.75	3-1/2
1-1/4	5-1/4	4	5/8	0.75	3-7/8
1-1/2	6-1/8	4	3/4	0.88	4-1/2
2	6-1/2	8	5/8	0.75	5
2-1/2	7-1/2	8	3/4	0.88	5-7/8
3	8-1/4	8	3/4	0.88	6-5/8
3-1/2	9	8	3/4	0.88	7-1/4
4	10	8	3/4	0.88	7-7/8
5	11	8	3/4	0.88	9-1/4
6	12-1/2	12	3/4	0.88	10-5/8
8	15	12	7/8	1	13
10	17-1/2	16	1	1.12	15-1/4
12	20-1/2	16	1-1/8	1.25	17-3/4
14	23	20	1-1/8	1.25	20-1/4
16	25-1/2	20	1-1/4	1.38	22-1/2
18	28	24	1-1/4	1.38	24-3/4
20	30-1/2	24	1-1/4	1.38	27
24	36	24	1-1/2	1.62	32

ANSI B16.5 Class 400 Flanges Weight and Dimension Chart (mm, kg)

Nominal Pipe Size NPS (inches)	Class 400
	Diameter of Flange (inches)	No. of Bolts	Diameter of Bolts (inches)	Diameter of Bolt Holes (inches)	Bolt Circle (inches)
1/4	3-3/8	4	1/2	0.62	2-1/4
1/2	3-3/4	4	1/2	0.62	2-5/8
3/4	4-5/8	4	5/8	0.75	3-1/4
1	4-7/8	4	5/8	0.75	3-1/2
1-1/4	5-1/4	4	5/8	0.75	3-7/8
1-1/2	6-1/8	4	3/4	0.88	4-1/2
2	6-1/2	8	5/8	0.75	5
2-1/2	7-1/2	8	3/4	0.88	5-7/8
3	8-1/4	8	3/4	0.88	6-5/8
3-1/2	9	8	7/8	1	7-1/4
4	10	8	7/8	1	7-7/8
5	11	8	7/8	1	9-1/4
6	12-1/2	12	7/8	1	10-5/8
8	15	12	1	1.12	13
10	17-1/2	16	1-1/8	1.25	15-1/4
12	20-1/2	16	1-1/4	1.38	17-3/4
14	23	20	1-1/4	1.38	20-1/4
16	25-1/2	20	1-3/8	1.5	22-1/2
18	28	24	1-3/8	1.5	24-3/4
20	30-1/2	24	1-1/2	1.62	27
24	36	24	1-3/4	1.88	32

ANSI B16.5 Class 600 Flanges Weight and Dimension Chart (mm, kg)

Nominal Pipe Size NPS (inches)	Class 600
	Diameter of Flange (inches)	No. of Bolts	Diameter of Bolts (inches)	Diameter of Bolt Holes (inches)	Bolt Circle (inches)
1/4	3-3/8	4	1/2	0.62	2-1/4
1/2	3-3/4	4	1/2	0.62	2-5/8
3/4	4-5/8	4	5/8	0.75	3-1/4
1	4-7/8	4	5/8	0.75	3-1/2
1-1/4	5-1/4	4	5/8	0.75	3-7/8
1-1/2	6-1/8	4	3/4	0.88	4-1/2
2	6-1/2	8	5/8	0.75	5
2-1/2	7-1/2	8	3/4	0.88	5-7/8
3	8-1/4	8	3/4	0.88	6-5/8
3-1/2	9	8	7/8	1	7-1/4
4	10-3/4	8	7/8	1	8-1/2
5	13	8	1	1.12	10-1/2
6	14	12	1	1.12	11-1/2
8	16-1/2	12	1-1/8	1.25	13-3/4
10	20	16	1-1/4	1.38	17
12	22	20	1-1/4	1.38	19-1/4
14	23-3/4	20	1-3/8	1.5	20-3/4
16	27	20	1-1/2	1.62	23-3/4
18	29-1/4	20	1-5/8	1.75	25-3/4
20	32	24	1-5/8	1.75	28-1/2
24	37	24	1-7/8	2	33

ANSI B16.5 Class 900 Flanges Weight and Dimension Chart (mm, kg)

Nominal Pipe Size NPS (inches)	Class 900
	Diameter of Flange (inches)	No. of Bolts	Diameter of Bolts (inches)	Diameter of Bolt Holes (inches)	Bolt Circle (inches)
1/2	4-3/4	4	3/4	0.88	3-1/4
3/4	5-1/8	4	3/4	0.88	3-1/2
1	5-7/8	4	7/8	1	4
1-1/4	6-1/4	4	7/8	1	4-3/8
1-1/2	7	4	1	1.12	4-7/8
2	8-1/2	8	7/8	1	6-1/2
2-1/2	9-5/8	8	1	1.12	7-1/2
3	9-1/2	8	7/8	1	7-1/2
4	11-1/2	8	1-1/8	1.25	9-1/4
5	13-3/4	8	1-1/4	1.38	11
6	15	12	1-1/8	1.25	12-1/2
8	18-1/2	12	1-3/8	1.5	15-1/2
10	21-1/2	16	1-3/8	1.5	18-1/2
12	24	20	1-3/8	1.5	21
14	25-1/4	20	1-1/2	1.62	22
16	27-3/4	20	1-5/8	1.75	24-1/2
18	31	20	1-7/8	2	27
20	33-3/4	20	2	2.12	29-1/2
24	41	20	2-1/2	2.62	35-1/2

ANSI B16.5 Class 2500 Flanges Weight and Dimension Chart (mm, kg)

Nominal Pipe Size NPS (inches)	Class 2500
	Diameter of Flange (inches)	No. of Bolts	Diameter of Bolts (inches)	Diameter of Bolt Holes (inches)	Bolt Circle (inches)
1/2	5-1/4	4	3/4	0.88	3-1/2
3/4	5-1/2	4	3/4	0.88	3-3/4
1	6-1/4	4	7/8	1	4-1/4
1-1/4	7-1/4	4	1	1.12	5-1/8
1-1/2	8	4	1-1/8	1.25	5-3/4
2	9-1/4	8	1	1.12	6-3/4
2-1/2	10-1/2	8	1-1/8	1.25	7-3/4
3	12	8	1-1/4	1.38	9
4	14	8	1-1/2	1.62	10-3/4
5	16-1/2	8	1-3/4	1.88	12-3/4
6	19	8	2	2.12	14-1/2
8	21-3/4	12	2	2.12	17-1/4
10	26-1/2	12	2-1/2	2.62	21-1/4
12	30	12	2-3/4	2.88	24-3/8