ASA/ ASME/ ANSI B36.19 Stainless Steel Pipe Weight, Dimensions Chart in mm, kg, PDF online

Since its invention over a century ago, stainless steel has become the world’s most broadly used and popular material. Chromium content gives its resistance against corrosion. Resistance can be demonstrated in reducing acids as well as against attacks that create dents in chloride solutions. It has a minimal maintenance requirement and a familiar shine, making it an excellent and finest material for stainless steel pipes. Stainless steel pipe is offered in a range of product types, including welded pipes and seamless pipes. The composition can change, allowing it to be used in a variety of sectors. Stainless steel pipe weight measured in kg. Stainless steel pipe is used on a regular basis by many industrial applications.

Stainless steel pipe is available in different product kinds, such as welded pipes and seamless pipes. The composition may vary, and this makes it possible to use it in respective industries. The general industrial company use stainless steel pipe for regular use. For detailed dimensions of stainless steel pipe, refer to Dimensions Chart below.

Basic Stainless Steel Pipe types

The basic stainless steel pipe types are:

• Seamless pipe

  A pipe that has absence weld joints or seams is known as a seamless pipe. It can handle intense or extreme temperatures and pressure. It is used in a wide variety of different oil and gas applications, but they are also used in mechanical and engineering industries also. Stainless Steel Pipe Dimensions Chart are in mm, kg.

• Welded Pipe

  Almost in every industrial applications, welded pipes got used because of their flexibility. However, they cost better when it comes to serving high corrosion resistance, thus resisting the pressure. The welded pipes are lighter in weight because of the kind of material used. They are economic as compared to other piping methods when it comes to paying your money. For detailed dimensions, refer to Dimensions chart below.

• Pipe Flanges

  The pipe flanges are available in a variety like threaded, lap joints and blinds. They are strong material and tough which ensure the offering of high-quality product with the utmost level of dependability. Stainless Steel Pipe Weight, Dimensions Chart in mm, kg.

Stainless Steel Pipes Properties

The stainless steel pipe properties are:

1. Corossion Resistance
2. Extreme low temperature resistance
3. Work Hardening
4. Ductility
5. High Strength

For detailed dimensions, refer to Dimensions chart below.

ASA/ ASME/ ANSI B36.19 Stainless Steel 304 Pipe Weight and Dimension Chart (mm, kg, meter, inches)

Nominal Bore		Outside Diameter	Sch-5S		Sch-10S		Sch-40S		Sch-80S		Sch-160S		Sch-XXS
mm	INCH	mm	Wt mm	Weight (Kg/mt)	Wt mm	Weight (Kg/mt)	Wt mm	Weight (Kg/mt)	Wt mm	Weight (Kg/mt)	Wt mm	Weight (Kg/mt)	Wt mm	Weight (Kg/mt)
3	1/8	10.3	1.24	0.276	1.24	0.28	1.73	0.37	2.41	0.47	-	-	-	-
6	1/4	13.7	1.24	0.390	1.65	0.49	2.24	0.631	3.02	0.80	-	-	-	-
10	3/8	17.1	1.24	0.490	1.65	0.63	2.31	0.845	3.20	1.10	-	-	-	-
15	1/2	21.3	1.65	0.800	2.11	1.00	2.77	1.27	3.75	1.62	4.75	1.94	7.47	2.55
20	3/4	26.7	1.65	1.03	2.11	1.28	2.87	1.68	3.91	2.20	5.54	2.89	7.82	3.63
25	1	33.4	1.65	1.30	2.77	2.09	3.38	2.50	4.55	3.24	6.35	4.24	9.09	5.45
32	1 1/4	42.2	1.65	1.65	2.77	2.70	3.56	3.38	4.85	4.47	6.35	5.61	9.70	7.77
40	1 1/2	48.3	1.65	1.91	2.77	3.11	3.68	4.05	5.08	5.41	7.14	7.25	10.16	9.54
50	2	60.3	1.65	2.40	2.77	3.93	3.91	5.44	5.54	7.48	8.74	11.1	11.07	13.44
65	2 1/2	73.0	2.11	3.69	3.05	5.26	5.16	8.63	7.01	11.4	9.53	14.9	14.2	20.39
80	3	88.9	2.11	4.51	3.05	6.45	5.49	11.30	7.62	15.2	11.1	21.3	15.24	27.65
100	4	114.3	2.11	5.84	3.05	8.36	6.02	16.07	8.56	22.3	13.49	33.54	17.12	41.03
125	5	141.3	2.77	9.47	3.40	11.57	6.55	21.8	9.53	31.97	15.88	49.11	19.05	57.43
150	6	168.3	2.77	11.32	3.40	13.84	7.11	28.3	10.97	42.7	18.2	67.56	21.95	79.22
200	8	219.1	2.77	14.79	3.76	19.96	8.18	42.6	12.7	64.6	23.0	111.2	22.23	107.8
250	10	273.1	3.40	22.63	4.19	27.78	9.27	60.5	12.7	96.0	28.6	172.4	25.40	155.15
300	12	323.9	3.96	31.25	4.57	36.00	9.52	73.88	12.7	132.0	33.32	238.76	25.40	186.97
350	14	355.6	3.96	34.36	4.78	41.3	11.13	94.59	19.05	158.08	35.71	281.70	-	-
400	16	406.4	4.19	41.56	4.78	47.29	12.7	123.30	21.41	203.33	40.46	365.11	-	-
450	18	457.2	4.19	46.80	4.78	53.42	14.27	155.80	23.8	254.36	45.71	466.40	-	-
500	20	508.0	4.78	59.25	5.54	68.71	15.09	183.42	26.19	311.2	49.99	564.68	-	-
600	24	609.6	5.54	82.47	6.35	94.45	17.48	255.41	30.96	442.08	59.54	808.22	-	-

Jindal SS 202 Pipe Weight Chart

Designation of Diameter		O/D	Nominal Wall Thickness
		DIA	SCH 80 S		SCH 80		SCH 100		SCH 120		SCH. 140		SCH.160		SCH.XXS
(A)	(B)	Meter MM	Wall Thk	WT Kg/Mtr	Wall Thk	WT Kg/Mtr	Wall Thk	WT Kg/Mtr	Wall Thk	WT Kg/Mtr	Wall Thk	WT Kg/Mtr	Wall Thk	WT Kg/Mtr	Wall Thk	WT Kg/Mtr
6	1/8	10.3	2.41	0.47
8	1/4	13.7	3.02	0.82
10	3/8	17.2	3.2	1.12
15	1/2	21.3	3.73	1.64									4.75	1.97	7.47	2.59
20	3/4	26.7	3.91	2.93									5.54	2.93	7.82	3.69
25	1	33.4	4.55	3.29									6.35	4.3	9.09	5.53
32	11/4	24.2	4.85	4.53									6.35	5.69	9.7	7.88
40	11/2	48.3	5.08	5.49									7.14	7.35	10.16	9.69
50	2	60.3	5.54	7.6									8.71	11.26	11.07	13.65
65	21/2	73	7.01	11.59									9.53	15.15	14.02	20.72
80	3	88.9	7.62	15.51									11.13	21.67	15.24	28.11
90	31/2	101.6	8.08	18.92											16.15	34.56
100	4	114.3	8.56	22.66					11.13	28.75			13.49	34.05	17.12	41.66
125	5	141.3	9.53	31.44					12.7	40.9			15.88	49.87	19.05	58.31
150	6	168.3	10.97	43.21					14.27	55.03			18.24	68.53	21.95	79.1
200	8	219.1	12.7	65.63			15.06	76.93	18.24	91.73	20.62	102.47	23.01	112.97	22.23	108
250	10	273.1	12.7	82.8	15.06	97.27	18.24	116.38	21.41	134.9	25.4	157.51	28.58	174.95	25.4	155.5
300	12	323.9	12.7	98.95	17.45	133.88	21.41	162.14	25.4	189.82	28.58	211.31	33.32	242.4	25.4	189.82
350	14	355.6	12.7	109.04	19.05	160.54	23.8	197.74	27.76	227.88	31.75	257.47	35.71	286.04
400	16	406.4	12.7	125.2	21.41	206.4	26.19	249.34	30.94	290.88	36.53	338.32	40.46	370.74
450	18	457.2	12.7	141.35	23.8	258.29	29.36	314.54	34.93	369.34	39.67	414.74	45.24	466.67
500	2C	508	12.7	157.51	26.19	315.97	32.54	387.41	38.1	448.3	44.45	515.94	49.99	573.31
550	22	558.8	12.7	173.66	28.57	379.7	34.92	457.83	41.27	535.17	47.62	609.3	53.97	682.57
600	24	609.6	12.7	189.82	30.94	448.3	38.89	555.76	46.02	649.44	52.37	730.72	59.51	819.7
650	26	660.4	12.7	205.97			(24.66D-t) t 1000 Wt/pam + formula WT Stainless Steel Pipe OD (mm) - W.T. (mm) XW.T. (mm) X 0.02466 = Kg. per mtr.
700	28	711.2			12.7	222.13
750	3C	762			1270	238.28
800	32	812.8			12.7	254.44
850	34	863.6			12.7	270.5
900	36	914.4			12.7	286.75

303 Stainless Steel Pipe Physical Properties

Denstiy lbm/in3	Coefficient of thermal Expansion (min/in)-°F			ElectricalResistivity mW-in						thermal Conductivity BTU/hr-ft-°F	Melting Range
at 68°F	at 68 – 212°F	at 68 – 932°F	at 68 – 1450°F	at 68 °F	at 212 °F	at 392°F	at 752 °F	at 1112 °F	at 1472°F	at 68–212°F
0.29	9.2	10.4	10.9	28.3	30.7	33.8	39.4	43.7	47.6	113.2	2552°F

Stainless Steel 304H Pipes and Stainless Steel 304L Pipes Chemical Compostion, Mechanical Properties and Physical Properties

Chemical Composition

	C	Mn	Si	P	S	Cr	Ni	N
304L	0.03max	2.0max	0.75max	0.045max	0.03max	min: 18.0 max: 20.0	min: 8.0 max: 12.0	0.10 max
304H	min: 18.0 max:20.0	min: 8.0 max: 10.5	min: 0.04 max:0.10	0.75 max	2.0 max	0.045 max	0.03 max	0.10 max

Mechanical Properties

Grade	Tensile Strength ksi (min)	Yield Strength 0.2% ksi (min)	Elongation %	Hardness (Brinell) MAX	Hardness (Rockwell B) MAX
304L	70	25	40	201	92
304H	75	30	40	201	92

Physical Properties

SS 304L
Density lbm/in3	Thermal Conductivity (BTU/h ft. °F)	Electrical Resistivity (in x 10-6)	Modulus of Elasticity (psi x 106	Coefficient of Thermal Expansion (in/in)/ °F x 10-6	Specific Heat (BTU/lb/ °F)	Melting Range (°F)
at 68°F: 0.285	9.4 at 212°F	28.3 at 68°F	28	9.4 at 32 – 212°F	0.1200 at 68°F to 212°F	2500 to 2590
	12.4 at 932 °F	39.4 at 752°F		10.2 at 32 – 1000°F
		49.6 at 1652 °F		10.4 at 32 – 1500°F
SS 304H
Denstiy lbm/in3	Coefficient of Thermal Expansion (min/in)-°F		Thermal Conductivity BTU/hr-ft-°F		Specific Heat BTU/lbm -°F	Modules of Elasticity (annealed)2-psi
at 68 °F	at 68 – 212°F	at 68 – 1600°F	at 212°F	at 932°F	at 32 – 212°F	in tension (E)
0.285	9.2	11.0	9.4	12.4	0.12	29 x 106

ASA/ ASME/ ANSI B36.19 Stainless Steel Pipe Dimensions , SS Pipe Schedule Chart and Weight of Stainless Steel Pipe

DIMENSION			10 SWG (3.2 MM) Weight/MTR	12 SWG (2.6 MM) Weight/MTR	14 SWG (2.1 MM) Weight/MTR	16 SWG (1.65 MM) Weight/MTR	18 SWG (1.2 MM) Weight/MTR	19 SWG (1.0 MM) Weight/MTR
Size	OD
1/2"		12.7	0.754	0.651	0.552	0.452	0.342	0.290
5/8"	15.875		1.006	0.856	0.718	0.582	0.437	0.369
3/4"		19.05	1.258	1.061	0.883	0.712	0.531	0.448
1"	25.4		1.762	1.470	1.214	0.972	0.720	0.605
1 1/4"		31.75	2.266	1.880	1.544	1.232	0.909	0.763
1 1/2"	38.1		2.770	2.289	1.875	1.492	1.098	0.920
2"		50.8	3.778	3.108	2.537	2.012	1.476	1.235
2 1/2"	63.5		4.786	3.928	3.198	2.531	1.854	1.550
3"		76.2	5.794	4.747	3.860	3.051	2.232	1.865
3 1/2"	88.9		6.802	5.566	4.521	3.571	2.610	2.180
4"	101.6		7.810	6.385	5.183	4.091	2.988	2.495

ASA/ ASME/ ANSI B36.19 Stainless Steel Square Pipe & Tubing dimensions and weight chart

Size Range	Thickness	Weight Kg / Metre
20 X 20	2	1.11
25 X 25	2	1.43
25 X 25	2.5	1.74
25 X 25	3	2.04
30 X 30	2	1.74
30 X 30	2.5	2.14s
30 X 30	3	2.51s
30 X 30	3.2	2.65s
40 X 40	2	2.37s
40 X 40	2.5	2.92s
40 X 40	3	3.45s
40 X 40	4	4.46s
40 X 40	5	5.40s
50 X 50	2	3.00s
50 X 50	2.5	3.71s
50 X 50	3	4.39s
50 X 50	4	5.72s
50 X 50	5	6.97
50 X 50	6	8.20s
50 X 50	8	10.50s
60 X 60	3	5.34
60 X 60	3.2	5.67s
60 X 60	3.6	6.34
60 X 60	4	6.97
60 X 60	5	8.54
70 X 70	2.5	5.28
70 X 70	3	6.28
70 X 70	3.5	7.25
70 X 70	3.6	7.46
70 X 70	4	8.23
70 X 70	5	10.10
70 X 70	8	15.29
70 X 70	10	19.13
80 X 80	3	7.22
80 X 80	3.5	8.35
80 X 80	3.6	8.59
80 X 80	4	9.48
80 X 80	5	11.70
80 X 80	6	13.80
80 X 80	6.3	14.40
80 X 80	8	17.83
80 X 80	10	21.88
90 X 90	3	8.16
90 X 90	3.5	9.45
90 X 90	3.6	9.72
90 X 90	4	10.70
90 X 90	5	13.30
90 X 90	6	15.70
90 X 90	6.3	16.40
90 X 90	8	20.32
90 X 90	10	25.53
100 X 100	3	9.10
100 X 100	4	12.00
100 X 100	5	14.80
100 X 100	6	17.60
100 X 100	6.3	18.40
100 X 100	8	22.90
100 X 100	10	27.86
100 X 100	12	33.44
120 X 120	4	14.50
120 X 120	5	18.00
120 X 120	6	21.30
120 X 120	6.3	22.30
120 X 120	8	27.90
120 X 120	10	34.13
120 X 120	12	39.94
120 X 120	16	54.64
140 X 140	6	25.97
140 X 140	8	32.89
140 X 140	10	41.15
150 X 150	4	18.30
150 X 150	5	22.70
150 X 150	6	27.00
150 X 150	6.3	28.30
150 X 150	8	35.40
150 X 150	10	43.47
150 X 150	12	53.48
150 X 150	16	65.05
160 X 160	6	27.39
160 X 160	8	36.90
160 X 160	10	46.88
180 X 180	5	27.97
180 X 180	6	33.26
180 X 180	8	43.00
180 X 180	10	53.00
180 X 180	12	61.01
180 X 180	12.5	65.20
180 X 180	16	81.30
200 X 200	5	31.18
200 X 200	6	37.09
200 X 200	8	48.00
200 X 200	10	59.30
200 X 200	12	68.84
200 X 200	12.5	73.00
200 X 200	16	90.91
250 X 250	6	46.83
250 X 250	8	60.50
250 X 250	10	75.00
250 X 250	12	88.45
250 X 250	12.5	92.70
250 X 250	16	111.48
300 X 300	6	55.30
300 X 300	8	74.18
300 X 300	10	90.70
300 X 300	12	108.68
300 X 300	12.5	112.00
300 X 300	16	141.84
350 X 350	10	105.93
350 X 350	12	126.74
350 X 350	16	166.94
400 X 400	8	97.56
400 X 400	10	121.95
400 X 400	12	151.97
400 X 400	16	191.94

ASA/ ASME/ ANSI B36.19 Stainless Steel Elliptical and oval tube sizes

Size	S/S Grade 304			S/S Grade 316
	Wall thickness			Wall thickness
	1.5mm	2.0mm	3.0mm	1.5mm	2.0mm	3.0mm
21 x 16	✓			✓
32 x 16	✓	✓		✓	✓
49 x 24.5	✓	✓		✓
50 x 38		✓			✓
65 x 32
65 x 33		✓			✓
70 x 35
72 x 26.5	✓			✓
75 x 25
78 x 39	✓	✓		✓	✓
90 x 45		✓			✓
90 x 60			✓			✓
98 x 50
103 x 51
129 x 70		✓	✓
130 x 66
146 x 76		✓			✓
162 x 83
164 x 87		✓			✓
197 x 103		✓			✓