Alloy Steel Sheets, Plate and Coil Weight, Dimensions Chart in mm, kg, PDF online
Alloy Steel Sheets:
Alloy steel sheet is a flat steel product that contains one or more alloying elements, such as nickel, chromium, molybdenum, and vanadium. The alloying elements are added to elevate the steel's properties, such as strength, hardness, toughness, and corrosion resistance. Some of the advantages of using alloy steel sheet like high strength, high hardness, high toughness, good corrosion resistance, good weldability, good formability. Alloy steel sheet comes in a broad range of grades, each with its own special properties. The alloy steel sheets weight and dimensions chart PDF has all the data related to these grades and specifications. Alloy steel sheets comes in all kinds of grades and surface treatments to suit a variety of applications, like automotive parts, mining equipment, oil and gas equipment, petrochemical equipment, transportation equipment, appliances, construction materials, agricultural equipment and power generation equipment
Alloy Steel Plates:
Alloy steel plates are products that is made by mixing different components in overall quantities among 1.0 percent and 50 percent by weight to strengthen its mechanical properties. Most alloy steel plates are simple to stamp and produce. There are basically two types of alloy steel- low alloy steel and high alloy steel. The former ones are those which have atmost 8 percent alloying substances, while the latter has more than 8 percent alloying substances. There are somewhat twenty alloying substances that can be added to carbon steel to get various types of alloy steel plates. Some of the commonly used elements are Aluminum, Copper, Chromium, Manganese, Silicon, Nickel, Tungsten and Vanadium. For knowing more about different alloy steel plates and their specifications, check our alloy steel plate weight and dimensions chart PDF in mm and kg. Some of the advantages of alloy steel plates are heat resistance, high strength, corrosion resistance, low-expansion, shape memory, lightweight and durability, and environmental friendly. Based on these key properties, some of the applications are structural components in construction and bridges, pressure vessel and boiler construction, chemical processing equipment, oil and gas drilling tools and pipelines and many more.
Alloy Steel Coils:
Alloy steel coil, whose main component are alloys, is a finished steel made of high quality alloy material by rolling or coiling. This steel coil has good rust resistance and strength, which not only can efficiently resist wear and tear, but also can be used in various extreme environments without concerns about rusting. It is mainly used for producing structural and chassis parts such as automobile beams and transmissions, which can reduce the weight of parts. Alloy steel coils have small amounts of one or more alloying elements (other than carbon), such as manganese, silicon, nickel, titanium, copper, chromium and aluminum. This results in special properties not found in ordinary carbon steels. Alloy steel coil have become one of the mainstay of industry because of their reasonable cost, wide availability, easy processing and good mechanical properties. It has same properties and similar uses as alloy steel sheets and plates. Alloy steel coils are available in various sizes and thicknesses, typically specified by their width, length, and thickness. They can range from thin coils used in precision applications to thicker coils used in heavy machinery and structural components. For more information on size and thicknesses, refer the alloy steel coil weight and dimensions chart PDF shown below.
Standard Specification Steel Sheet Weight and Dimension Chart
| Specification |
ASTM A387 / ASME SA387 |
| Thickness |
0.1mm to 100 mm Thk |
| Finish |
Cold rolled sheet (CR), Hot rolled plate (HR), 2B, 2D, BA NO(8), SATIN (Met with Plastic
Coated) |
| Condition |
Polished on both sides |
| Export to |
Thailand, Egypt, Ireland, Brazil, Singapore, Indonesia, Korea, Iran, Spain, Canada,
India, Saudi Arabia, Oman, Dubai, Ukraine, USA, Peru, etc |
| Stock in form of |
Plate, Sheet, Coils, Shim Sheet, Strip, Flats, Clad Plate, Rolling Sheet, hot rolled,
cold rolled, annealed, Flat Sheet, Rolling Plate, tread plate, Foils, Rolls, Blank
(Circle), soft annealed, descaled, Plain Sheet, Flat Shim, sheared, Checker Plate |
| Value Added Service |
Pickling, Cladding, Heat Treatment, Annealed,Cutting, Bending, Forging, Minor
Fabrication, Polish, Rolling Etc. |
| Width |
10-2500mm |
| Hardness |
Hard, Half Hard, Soft, Spring Hard, Quarter Hard etc. |
| Temper |
Annealed |
| Dealers & Distributor of |
JINDAL, TATA, POSCO, JISCO, TISCO, BHUSHAN, SAIL, ESSAR, INDIAN, LISCO, BAOSTEEL
IMPORTED material |
| Test Report |
- EN 10204/3.1B
- Third Party Inspection Report, etc
- 100% Radiography Test Report
- Strict Control from Raw Material to Finished
- High special strength, high melt point
- Customer support after-sales service
- Raw Materials Certificate
- Excellent corrosive resistance, good thermal resistance
|
| Profiling |
To provide a full profiling service we use numerous profiling methods including:
- Plasma Plate Cutting
- Oxy-propane Flame Cutting
- Laser Plate Cutting
|
| Specialized in |
- material under 3/16 " [5.00 mm] in thickness and 24" [600 mm] and over in width
- cold-rolled material under 3/16" [5.00 mm] in thickness and under 24" [600 mm]
in width
- material 3/16" [5.00 mm] and over in thickness and over 10" [250 mm] in width
- Free Quote, Inquiry answered within 24 hours
|
| Length & Sizes |
1000 mm x 2000 mm, 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1250mm x 2500mm, 1500mm x
3000mm to 6000mm, 2000mm x 4000mm to 6000mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000
mm x 4000 mm, 2m, 2.44m, 3m, 36" X 120" or 48" X 144", 4' x 8', Cut to size available
|
ASTM A387 Polished Hot Rolled Coil Dimension Chart
Metric Dimensions
| Surface finish |
Thickness (mm) |
Width (mm) |
| 2B – Cold rolled, heat treated, pickled, skin passed |
0.25–8.0 |
max. 2032 |
| 2D – Cold rolled, heat treated, pickled |
0.4–6.35 |
max. 1524 |
| 2E – Cold rolled, heat treated, mechanically descaled |
0.4–8.0 |
max. 2032 |
| 2R – Cold rolled, bright annealed |
0.25–3.5 |
max. 1524 |
| 2H – Work hardened |
0.4–6.35 |
max. 1524 |
| Polished, brushed |
0.5–4.0 |
max. 1524 |
Imperial Dimensions
| Surface finish |
Gauge (in) |
Width (in) |
| 2B – Cold rolled, heat treated, pickled, skin passed |
10–24 |
max. 72* |
| 2D – Cold rolled, heat treated, pickled |
12–24 |
max. 60 |
| BA Mexinox only |
18–28 |
max. 48 |
| Polished (not brushed) |
11–24 |
max. 60 |
| Temper rolled Mexinox only |
13–29 |
max. 48 |
4130 Alloy Steel Sheet Weight chart
| Thickness |
Plate Weight per Unit Area |
Density |
| 3/16 inches |
0.06000 lbs/in²42.184176 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
| 1/4 inches |
0.08 lbs/in²56.245568 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
| 3/8 inches |
0.121 lbs/in²85.0714216 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
| 1/2 inches |
0.161 lbs/in²113.1942056 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
| 5/8 inches |
0.196 lbs/in²137.8016416 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
| 3/4 inches |
0.235 lbs/in²165.221356 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
| 7/8 inches |
0.274 lbs/in²192.6410704 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
| 1 inches |
0.313 lbs/in²220.0607848 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
| 1 1/4 inches |
0.391 lbs/in²274.9002136 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
| 1 1/2 inches |
0.47 lbs/in²330.442712 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
| 1 3/4 inches |
0.549 lbs/in²385.9852104 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
| 2 inches |
0.627 lbs/in²440.8246392 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
| 2 1/4 inches |
0.705 lbs/in²495.664068 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
| 2 1/2 inches |
0.784 lbs/in²551.2065664 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
| 2 3/4 inches |
0.862 lbs/in²606.0459952 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
| 3 inches |
0.941 lbs/in²661.5884936 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
ASME SA387 Alloy Steel Sheet Size chrat
| SIZE |
SIZE |
| .125" |
3.18mm |
| .134" |
3.40mm |
| .156" |
3.96mm |
| .187" |
4.75mm |
| .250" |
6.35mm |
| .312" |
7.92mm |
| .375" |
9.53mm |
| .500" |
12.7mm |
| .625" |
15.9mm |
| .750" |
19.1mm |
| .875" |
22.2mm |
| 1" |
25.4mm |
| 1.125" |
28.6mm |
| 1.250" |
31.8mm |
| 1.500" |
38.1mm |
| 1.750" |
44.5mm |
| 2" |
50.8mm |
| 2.500" |
63.5mm |
| 3" |
76.2mm |
Thickness of Aisi 4140 Alloy Steel Plate
| Thicknessin. (mm) |
Sheet Width |
| 36 (914.4)in. (mm) |
48 (1,219)in. (mm) |
| 0.017–0.030 (0.43–0.76) |
0.0015 (0.038) |
0.002 (0.051) |
| 0.031–0.041 (0.79–1.04) |
0.002 (0.051) |
0.003 (0.076) |
| 0.042–0.059 (1.1–1.5) |
0.003 (0.076) |
0.004 (0.10) |
| 0.060–0.073 (1.5–1.9) |
0.003 (0.076) |
0.0045 (0.11) |
| 0.074–0.084 (1.9–2.1) |
0.004 (0.10) |
0.0055 (0.14) |
| 0.085–0.099 (2.2–2.5) |
0.004 (0.10) |
0.006 (0.15) |
| 0.100–0.115 (2.5–2.9) |
0.005 (0.13) |
0.007 (0.18) |
| 0.116–0.131 (2.9–3.3) |
0.005 (0.13) |
0.0075 (0.19) |
| 0.132–0.146 (3.4–3.7) |
0.006 (0.15) |
0.009 (0.23) |
| 0.147–0.187 (3.7–4.7) |
0.007 (0.18) |
0.0105 (0.2) |
Chemical Structure of 2ASME SA387 AS Shim Stock
| Grade |
C |
Si |
Mn |
P max % |
S Max % |
Cr |
Mo |
| ASTM A 387 GR.2 |
0.05-0.21 |
0.15-0.40 |
0.55-0.80 |
0.035 |
0.035 |
0.50-0.80 |
0.45-0.60 |
| ASTM A 387 GR.5 |
0.15 max |
0.50 max |
0.30-0.60 |
0.030 |
0.030 |
4.00-6.00 |
0.45-0.60 |
| ASTM A 387 GR.9 |
0.15 max |
1.00 max |
0.30-0.60 |
0.030 |
0.030 |
8.00-10.0 |
0.85-1.10 |
| ASTM A 387 GR.11 |
0.05-0.17 |
0.15-0.40 |
0.40-0.65 |
0.035 |
0.035 |
0.80-1.15 |
0.45-0.60 |
| ASTM A 387 GR.12 |
0.05-0.17 |
0.15-0.80 |
0.40-0.65 |
0.035 |
0.035 |
1.00-1.50 |
0.45-0.65 |
| ASTM A 387 GR.22 |
0.05-0.15 |
0.50 max |
0.30-0.60 |
0.035 |
0.035 |
2.00-2.50 |
0.90-1.10 |
| ASTM A 387 GR.91 |
0.08-0.12 |
0.20-0.50 |
0.30-0.60 |
0.020 |
0.010 |
8.00-9.50 |
0.85-1.05 |
| ASTM A 204 GR. A |
0.18 max |
0.15-0.40 |
0.90 max |
0.035 |
0.035 |
- |
- |
| ASTM A 204 GR. B |
0.20 max |
0.15-0.40 |
0.90 max |
0.035 |
0.035 |
- |
- |
Mechanical Behaviour of Low Alloy High Strength Steel Plate
| Grade |
C |
Si |
Mn |
P max % |
S Max % |
Cr |
Mo |
| ASTM A 387 GR.2 |
0.05-0.21 |
0.15-0.40 |
0.55-0.80 |
0.035 |
0.035 |
0.50-0.80 |
0.45-0.60 |
| ASTM A 387 GR.5 |
0.15 max |
0.50 max |
0.30-0.60 |
0.030 |
0.030 |
4.00-6.00 |
0.45-0.60 |
| ASTM A 387 GR.9 |
0.15 max |
1.00 max |
0.30-0.60 |
0.030 |
0.030 |
8.00-10.0 |
0.85-1.10 |
| ASTM A 387 GR.11 |
0.05-0.17 |
0.15-0.40 |
0.40-0.65 |
0.035 |
0.035 |
0.80-1.15 |
0.45-0.60 |
| ASTM A 387 GR.12 |
0.05-0.17 |
0.15-0.80 |
0.40-0.65 |
0.035 |
0.035 |
1.00-1.50 |
0.45-0.65 |
| ASTM A 387 GR.22 |
0.05-0.15 |
0.50 max |
0.30-0.60 |
0.035 |
0.035 |
2.00-2.50 |
0.90-1.10 |
| ASTM A 387 GR.91 |
0.08-0.12 |
0.20-0.50 |
0.30-0.60 |
0.020 |
0.010 |
8.00-9.50 |
0.85-1.05 |
| ASTM A 204 GR. A |
0.18 max |
0.15-0.40 |
0.90 max |
0.035 |
0.035 |
- |
- |
| ASTM A 204 GR. B |
0.20 max |
0.15-0.40 |
0.90 max |
0.035 |
0.035 |
- |
- |