Live metals rate

Steel Alloys Threaded Fittings Mechanical, Weight, Dimension, Size and Physical Properties Chart Pdf, Table

The task of determining the proper pipe or tube for your project appears like a quest through the labyrinth. Today, it is almost impossible to choose. As there are numerous types, and each of them may have the different set of features needed for your particular purpose. This is the place to start using a pipe & tube properties chart as a guide through the visible world. It actually develops a holistic grasp of the vital attributes including chemical constituents, mechanical characteristics, mass, dimensions and physical attributes as all the above factors are necessary to draw the right conclusion. While the availability of such data is key, the secret is not in simply having access to the data. Deciphering what type of piping or tube is being used and what properties determine the optimum performance of those piping or tubes is a must. This section of the page tries to extensively analyze the data offered, providing a user with strong and crisp interpretations of each category that was staged out in the chart.

Dimensions Reducing Threaded Fittings - 3000 Lbs

Reducing Threaded Fittings
Nominal Pipe Size (inches) A B C
1/2 25.4 35.71 23.81
3/4 26.98 43.65 29.36
1 33.33 50.80 36.51
1¼ 33.33 65.08 44.45
1½ 34.92 72.23 50.80
2 38.10 88.10 65.08
2½ 46.03 103.18 76.20
3 50.80 122.23 93.66
3½ 53.975 132.55 101.6
4 57.15 151.60 120.65
5 66.67 185.73 141.28
6 69.85 219.07 169.86

Dimensions Reducing Threaded Fittings - 6000 Lbs

Reducing Threaded Fittings
Nominal Pipe Size (inches) A B C
1/2 31.75 43.65 19.05
3/4 36.51 49.60 25.40
1 39.68 61.91 33.33
1¼ 41.27 69.05 38.10
1½ 42.86 82.55 49.21
2 52.38 102.39 69.85

Dimensions Size on Size Threaded Fittings - 3000 Lbs

Reducing Threaded Fittings
Nominal Pipe Size (inches) A B C D
1/2 25.40 34.92 23.81 15.87
3/4 26.98 41.27 30.16 20.63
1 33.33 50.80 36.51 26.98
1¼ 33.33 60.32 44.45 34.92
1½ 34.92 73.02 50.80 41.27
2 38.10 88.90 65.08 52.38
2½ 48.41 103.18 76.20 63.50
3 50.80 122.23 93.66 77.78
3½ 53.97 136.52 112.71 90.48
4 57.15 153.98 120.65 103.18
5 61.91 184.15 133.35 133.35
6 69.85 220.66 146.05 146.05

Steel Alloys Physical, Thermal, and Electrical Properties And More

Physical Properties Metric Comments
Density 0.190 - 9.01 g/cc Average value: 7.79 g/cc Grade Count:1432
Porosity 0.000 - 5.00 % Average value: 2.97 % Grade Count:15
Particle Size 0.000 - 300 µm Average value: 37.9 µm Grade Count:88
Permeability 0.0150 - 1.00 Average value: 0.509 Grade Count:4
Thickness 20.0 - 508 microns Average value: 86.8 microns Grade Count:14
Mechanical Properties Metric Comments
Hardness, Brinell 80.0 - 600 Average value: 251 Grade Count:564
Hardness, Knoop 97.0 - 662 Average value: 301 Grade Count:276
Hardness, Rockwell A 51.1 - 58.0 Average value: 54.0 Grade Count:8
Hardness, Rockwell B 37.0 - 130 Average value: 86.2 Grade Count:503
Hardness, Rockwell C 10.0 - 71.0 Average value: 39.6 Grade Count:447
Hardness, Vickers 82.0 - 1100 Average value: 294 Grade Count:339
Tensile Strength, Ultimate 32.3 - 3100 MPa Average value: 935 MPa Grade Count:1729
Tensile Strength, Yield 25.0 - 2500 MPa Average value: 669 MPa Grade Count:1638
Elongation at Break 0.000 - 88.0 % Average value: 26.5 % Grade Count:1583
Elongation at Yield 0.000 - 62.0 % Average value: 22.7 % Grade Count:22
Reduction of Area 0.500 - 88.0 % Average value: 49.3 % Grade Count:308
Modulus of Elasticity 2.36 - 310 GPa Average value: 196 GPa Grade Count:1175
Flexural Yield Strength 58.0 - 938 MPa Average value: 479 MPa Grade Count:4
Compressive Yield Strength 262 - 3000 MPa Average value: 1080 MPa Grade Count:11
Notched Tensile Strength 710 - 2230 MPa Average value: 1740 MPa Grade Count:30
Bulk Modulus 166 GPa Average value: 166 GPa Grade Count:14
Poissons Ratio 0.120 - 0.380 Average value: 0.282 Grade Count:310
Fatigue Strength 85.0 - 1070 MPa Average value: 439 MPa Grade Count:54
Fracture Toughness 17.6 - 165 MPa-m½ Average value: 90.9 MPa-m½ Grade Count:9
Machinability 18.0 - 65.0 % Average value: 31.7 % Grade Count:126
Shear Modulus 62.1 - 86.5 GPa Average value: 77.6 GPa Grade Count:324
Shear Strength 74.5 - 597 MPa Average value: 358 MPa Grade Count:5
Izod Impact 16.3 - 208 J Average value: 115 J Grade Count:140
Izod Impact Unnotched 13.6 - 149 J Average value: 77.8 J Grade Count:13
Charpy Impact 0.500 - 404 J Average value: 115 J Grade Count:253
Charpy Impact, Unnotched 7.46 - 294 J Average value: 157 J Grade Count:9
Charpy Impact Unnotched 1.59 - 60.0 J/cm² Average value: 22.0 J/cm² Grade Count:3
Charpy Impact, Notched 0.710 - 294 J/cm² Average value: 137 J/cm² Grade Count:5
Taber Abrasion, mg/1000 Cycles 3.20 - 30.0 Average value: 11.3 Grade Count:3
Electrical Properties Metric Comments
Electrical Resistivity 0.00000450 - 0.000145 ohm-cm Average value: 0.0000729 ohm-cm Grade Count:962
Magnetic Permeability 1.00 - 3000 Average value: 178 Grade Count:316
Magnetic Coercive Force, Hc 1.20 - 7.00 Oe Average value: 2.40 Oe Grade Count:6
Magnetic Saturation Flux Density, Bmax 11900 - 17000 Gauss Average value: 15000 Gauss Grade Count:6
Magnetic Remanence, Br 2500 - 8500 Gauss Average value: 6000 Gauss Grade Count:6
Curie Temperature -115 - 732 °C Average value: 266 °C Grade Count:14
Thermal Properties Metric Comments
CTE, linear 7.02 - 21.1 µm/m-°C Average value: 15.4 µm/m-°C Grade Count:977
Specific Heat Capacity 0.200 - 0.850 J/g-°C Average value: 0.478 J/g-°C Grade Count:934
Thermal Conductivity 10.0 - 34.3 W/m-K Average value: 16.7 W/m-K Grade Count:567
Melting Point 1230 - 1530 °C Average value: 1440 °C Grade Count:580
Solidus 1230 - 1480 °C Average value: 1410 °C Grade Count:553
Liquidus 1360 - 1530 °C Average value: 1460 °C Grade Count:553
Maximum Service Temperature, Air 100 - 1400 °C Average value: 837 °C Grade Count:368
Minimum Service Temperature, Air -200 - -30.0 °C Average value: -133 °C Grade Count:26
Optical Properties Metric Comments
Emissivity (0-1) 0.7 Average value: 0.700 Grade Count:4
Processing Properties Metric Comments
Processing Temperature 382 - 863 °C Average value: 767 °C Grade Count:4
Annealing Temperature 593 - 1200 °C Average value: 977 °C Grade Count:31
Hot-Working Temperature 482 - 1290 °C Average value: 960 °C Grade Count:13

Our website carries a complete manual, along with anglers' threaded fittings, which covers mechanical specifications, weight, dimensions, sizes, and physical properties. In our perfectly designed PDF and tables we offer the whole dataset of significant information necessary for the engineers and for the people who select and work with these kinds of fittings. Our tools cover such aspects from mechanical strength to application size selection and compress everything into an easy to reference chart. Our content is comprehensible and convenient for use, thus the choice of appropriate steel alloy threaded fittings required for different projects becomes possible.

Related Topic

Raw Material Prices (Updated as on: 20 May 2024 02:29 AM) LIVE RATES

MetalsPrice/TonnePrice/KG
Nickel$20,953₹1,745.35
LME$21,004₹1,749.63
Copper$11,127₹926.91
LME$10,481₹873.08
Aluminum$2,611₹217.47
LME$2,598₹216.39
Zinc$3,032₹252.55
LME$2,974₹247.73
Lead$2,292₹190.95
LME$2,286₹190.42

Currency Rates (Updated as on: 20 May 2024 02:29 AM) LIVE RATES

  • 1 USD = 83.3 INR
  • 1 CNY = 11.53 INR
  • 1 AED = 22.68 INR
  • 1 USD = 3.67 AED
  • 1 USD = 7.22 CNY
Stainless Steel
Carbon Steel
Alloy Steel
Copper
Aluminium
Monel
Inconel
Brass
Titanium
Tantalum
Duplex
Hastelloy
Incoloy
Nickel Alloy